如下配置配置了2个vagrant 的虚拟机参数如下
# -*- mode: ruby -*-
# vi: set ft=ruby :
# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.
# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
config.vm.define "node1" do |node1|
node1.vm.box = "centos7.2"
node1.vm.hostname = "node1"
node1.vm.provider :virtualbox do |vb|
vb.name = "node1"
#指定vm-name，也就是virtualbox管理控制台中的虚机名称。如果不指定该选项会生成一个随机的名字，不容易区分。
vb.gui = true
# vagrant up启动时，是否自动打开virtual box的窗口，缺省为false
vb.memory = "4096"
#指定vm内存，单位为MB
vb.cpus = 2
#设置CPU个数
end
node1.vm.network "private_network", ip: "192.168.33.10"
#网络： 设置私有网络
#config.vm.network :forwarded_port, guest: 80, host: 9080
#config.vm.network :forwarded_port, guest: 443, host: 9443
#config.vm.network :forwarded_port, guest: 8082, host: 8082
end
config.vm.define "node2" do |node2|
node2.vm.box = "centos7.2"
node2.vm.hostname = "node2"
node2.vm.provider :virtualbox do |vb|
vb.name = "node2"
#指定vm-name，也就是virtualbox管理控制台中的虚机名称。如果不指定该选项会生成一个随机的名字，不容易区分。
vb.gui = true
# vagrant up启动时，是否自动打开virtual box的窗口，缺省为false
vb.memory = "4096"
#指定vm内存，单位为MB
vb.cpus = 2
#设置CPU个数
end
node2.vm.network "private_network", ip: "192.168.33.12"
#网络： 设置私有网络
end
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
# config.vm.network "public_network"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "../data", "/vagrant_data"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
# config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
# end
#
# View the documentation for the provider you are using for more
# information on available options.
# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
# config.vm.provision "shell", inline: <<-SHELL
# apt-get update
# apt-get install -y apache2
# SHELL
end
