第十三章九析带你轻松完爆 hyperledger fabric - 创建静态组织

本系列文章:

第一章：九析带你完爆 hyperledger fabric - 快速上手 basic-network 样例

第二章：九析带你完爆 hyperledger fabric - 快速搭建 GO 环境

第三章：九析带你完爆 hyperledger fabric - 快速上手 first-network 样例

第四章：九析带你完爆 hyperledger fabric - 系统逻辑架构篇

第五章：九析带你完爆 hyperledger fabirc - 网络节点介绍

第六章: 九析带你轻松完爆 hyperledger fabric - 区块和区块链介绍

第七章: 九析带你轻松完爆 hyperledger fabric - 区块链防篡改机制

第八章：九析带你轻松完爆 hyperledger fabric - Couchdb 安装

第九章：九析带你轻松完爆 hyperledger fabric - NVM 和 Nodejs 安装

扫描二维码关注公众号，回复： 9112344 查看本文章

第十章：九析带你轻松完爆 hyperledger fabric - chaincode 生命周期介绍

第十一章: 九析带你轻松完爆 hyperledger fabric - 创建联盟

第十二章: 九析带你轻松完爆 hyperledger fabric - configtxlator 尝鲜

第十三章: 九析带你轻松完爆 hyperledger fabric - 创建静态组织

1 前言

2 创建配置文件和目录

2.1 创建工作目录

2.2 创建必要目录

2.3 创建创世区块、通道、联盟资源文件

2.4 创建节点配置文件

2.5 创建 docker-compose.yaml 文件

3 生成证书

4 生成创世区块

5 生成通道交易文件

6 创建 Anchor 节点的 MSP 回话文件

7 初始化容器

8 创建通道

9 其他组织加入通道

10 小节

11 深入

11.1 生成新的通道交易文件

11.2 生成 Anchor 节点 MSP 文件

11.3 创建通道

1 前言

在上面的章节中，我们已经创建了联盟，下面将介绍如何创建组织。创建组织的方式可以分为两种：静态和动态。所谓静态就是在建立区块链网络前就已经在联盟下确定好组织了，在以后的业务发展过程中，不会再新增组织了；所谓动态就是随着业务的开展，会有新的组织要求加入进来，这时就不能重新停止区块链网络，然后修改配置文件，再启动建立，而是通过动态增量的方式添加。由于动态添加组织稍微难一些，我们将放在后续讲解。这节先介绍静态创建组织的方式。

需注意，本文所使用的 fabric 源码版本为 1.4.4。此外，为了简单和更容易理解，我们将使用自建脚本。本节会用到工具 configtxgen 和 cryptogen，所以确保这 2 个工具你都正确的安装和配置。如果你不会配置，请参考哥的第三章，不用谢。

2 创建配置文件和目录

2.1 创建工作目录

mkdir jiuxi

cd jiuxi

2.2 创建必要目录

这里的必要目录就是存放证书的目录和存放创世区块、通道交易文件、peer 主节点（Anchor）交易文件的目录：

mkdir crypto-config config

2.3 创建创世区块、通道、联盟资源文件

touch configtx.yaml

configtx.yaml 用来存放创世区块、联盟、通道、组织等配置信息，内容如下，根据内容可知，已经在配置阶段就完成了组织的创建：

Organizations:

- &OrdererOrg

Name: OrdererOrg

ID: OrdererMSP

MSPDir: crypto-config/ordererOrganizations/jiuxi.org/msp

- &Org1

Name: Org1MSP

ID: Org1MSP

MSPDir: crypto-config/peerOrganizations/org1.jiuxi.org/msp

AnchorPeers:

- Host: peer0.org1.jiuxi.org

Port: 11151

- &Org2

Name: Org2MSP

ID: Org2MSP

MSPDir: crypto-config/peerOrganizations/org2.jiuxi.org/msp

AnchorPeers:

- Host: peer0.org2.jiuxi.org

Port: 12151

- &Org3

Name: Org3MSP

ID: Org3MSP

MSPDir: crypto-config/peerOrganizations/org3.jiuxi.org/msp

AnchorPeers:

- Host: peer0.org3.jiuxi.org

Port: 13151

Orderer: &OrdererDefaults

OrdererType: solo

Addresses:

- orderer.jiuxi.org:7050

BatchTimeout: 2s

BatchSize:

MaxMessageCount: 10

AbsoluteMaxBytes: 99 MB

PreferredMaxBytes: 512 KB

Kafka:

Brokers:

- 127.0.0.1:9092

Organizations:

Application: &ApplicationDefaults

Organizations:

Profiles:

JiuxiOrdererGenesis:

Orderer:

<<: *OrdererDefaults

Organizations:

- *OrdererOrg

Consortiums:

JiuxiConsortium:

Organizations:

- *Org1

- *Org2

- *Org3

JiuxiChannel:

Consortium: JiuxiConsortium

Application:

<<: *ApplicationDefaults

Organizations:

- *Org1

- *Org2

- *Org3

2.4 创建节点配置文件

touch crypto-config.yaml

crypto-config.yaml 用来配置排序节点和 peer 节点，内容如下：

OrdererOrgs:

- Name: Orderer

Domain: jiuxi.org

Specs:

- Hostname: orderer

PeerOrgs:

- Name: Org1

Domain: org1.jiuxi.org

Template:

Count: 2

Users:

Count: 1

- Name: Org2

Domain: org2.jiuxi.org

Template:

Count: 2

Users:

Count: 1

- Name: Org3

Domain: org3.jiuxi.org

Template:

Count: 2

Users:

Count: 1

2.5 创建 docker-compose.yaml 文件

docker-compose.yaml 文件用来声明容器编排或者容器依赖关系，内容如下：

version: '2'

networks:

jiuxi:

services:

couchdb:

container_name: couchdb

image: hyperledger/fabric-couchdb

environment:

- COUCHDB_USER=

- COUCHDB_PASSWORD=

ports:

- 5984:5984

networks:

- jiuxi

orderer.jiuxi.org:

container_name: orderer.jiuxi.org

image: hyperledger/fabric-orderer

environment:

- FABRIC_LOGGING_SPEC=info

- ORDERER_GENERAL_LISTENADDRESS=0.0.0.0

- ORDERER_GENERAL_GENESISMETHOD=file

- ORDERER_GENERAL_GENESISFILE=/etc/hyperledger/configtx/genesis.block

- ORDERER_GENERAL_LOCALMSPID=OrdererMSP

- ORDERER_GENERAL_LOCALMSPDIR=/etc/hyperledger/msp/orderer/msp

working_dir: /opt/gopath/src/github.com/hyperledger/fabric/orderer

command: orderer

ports:

- 7050:7050

volumes:

- ./config/:/etc/hyperledger/configtx

- ./crypto-config/ordererOrganizations/jiuxi.org/orderers/orderer.jiuxi.org/:/etc/hyperledger/msp/orderer

- ./crypto-config/peerOrganizations/org1.jiuxi.org/peers/peer0.org1.jiuxi.org/:/etc/hyperledger/msp/peerOrg1

networks:

- jiuxi

peer0.org1.jiuxi.org:

container_name: peer0.org1.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer0.org1.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org1MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer0.org1.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 11151:7051

- 11153:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org1.jiuxi.org/peers/peer0.org1.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org1.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

peer1.org1.jiuxi.org:

container_name: peer1.org1.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer1.org1.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org1MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer1.org1.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 11251:7051

- 11253:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org1.jiuxi.org/peers/peer1.org1.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org1.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

peer0.org2.jiuxi.org:

container_name: peer0.org2.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer0.org2.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org2MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer0.org2.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 12151:7051

- 12153:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org2.jiuxi.org/peers/peer0.org2.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org2.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

peer1.org2.jiuxi.org:

container_name: peer1.org2.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer1.org2.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org2MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer1.org2.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 12251:7051

- 12253:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org2.jiuxi.org/peers/peer1.org2.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org2.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

peer0.org3.jiuxi.org:

container_name: peer0.org3.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer0.org3.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org3MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer0.org3.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 13151:7051

- 13153:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org3.jiuxi.org/peers/peer0.org3.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org3.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

peer1.org3.jiuxi.org:

container_name: peer1.org3.jiuxi.org

image: hyperledger/fabric-peer

environment:

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- CORE_PEER_ID=peer1.org3.jiuxi.org

- FABRIC_LOGGING_SPEC=info

- CORE_CHAINCODE_LOGGING_LEVEL=info

- CORE_PEER_LOCALMSPID=Org3MSP

- CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/

- CORE_PEER_ADDRESS=peer1.org3.jiuxi.org:7051

- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_jiuxi

- CORE_LEDGER_STATE_STATEDATABASE=CouchDB

- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=

- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=

working_dir: /opt/gopath/src/github.com/hyperledger/fabric

command: peer node start

ports:

- 13251:7051

- 13253:7053

volumes:

- /var/run/:/host/var/run/

- ./crypto-config/peerOrganizations/org3.jiuxi.org/peers/peer1.org3.jiuxi.org/msp:/etc/hyperledger/msp/peer

- ./crypto-config/peerOrganizations/org3.jiuxi.org/users:/etc/hyperledger/msp/users

- ./config:/etc/hyperledger/configtx

depends_on:

- orderer.jiuxi.org

- couchdb

networks:

- jiuxi

cli:

container_name: cli

image: hyperledger/fabric-tools

tty: true

environment:

- GOPATH=/opt/gopath

- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

- FABRIC_LOGGING_SPEC=info

- CORE_PEER_ID=cli

- CORE_PEER_ADDRESS=peer0.org1.jiuxi.org:11251

- CORE_PEER_LOCALMSPID=Org1MSP

- CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.jiuxi.org/users/[email protected]/msp

- CORE_CHAINCODE_KEEPALIVE=10

working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

command: /bin/bash

volumes:

- /var/run/:/host/var/run/

- ./../chaincode/:/opt/gopath/src/github.com/

- ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/

networks:

- jiuxi

全部创建完毕后的目录结构如下：

3 生成证书

cryptogen generate --config=./crypto-config.yaml

命令执行成功会在 crypto-config 目录下生成证书

4 生成创世区块

configtxgen -profile JiuxiOrdererGenesis -outputBlock ./config/genesis.block

执行成功会在 config 目录下生成创世区块 genesis.block。

5 生成通道交易文件

configtxgen -profile JiuxiChannel -outputCreateChannelTx ./config/channel1.tx -channelID channel1

命令执行成功会将通道交易文件生成在 config 目录下。

6 创建 Anchor 节点的 MSP 回话文件

configtxgen -profile JiuxiChannel -outputAnchorPeersUpdate ./config/channel1Org1MSPanchors.tx -channelID channel1 -asOrg Org1MSP

configtxgen -profile JiuxiChannel -outputAnchorPeersUpdate ./config/channel1Org2MSPanchors.tx -channelID channel1 -asOrg Org2MSP

7 初始化容器

启动 docker-compose.yaml 配置文件，生成容器：

docker-compose -f docker-compose.yaml up &

docker ps -a

启动成功后截图如下：

执行到此步骤已经完成了区块链搭建，orderer、peer、cli、couchdb 节点的启动，但是目前组织的 peer 节点还并没有处于通道之中，下一步就需要开始创建通道和将节点加入到通道中了。

8 创建通道

在 peer0.org1.jiuxi.org 节点上创建通道 channel1，通道创建成功后，会生成通道区块文件 .block，并将自身组织加入到通道中：

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org1.jiuxi.org peer channel create -o orderer.jiuxi.org:7050 -c channel1 -f /etc/hyperledger/configtx/channel1.tx

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org1.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org1.jiuxi.org peer channel join -b channel1.block

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org1.jiuxi.org peer channel list

9 其他组织加入通道

上面只是 org1 组的 peer0 节点加入了通道，还需要将org1 和 org2 组织剩余的 peer 节点依次加入通道：

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.jiuxi.org peer channel fetch 0 channel1.block -o orderer.jiuxi.org:7050 -c channel1

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.jiuxi.org peer channel join -b channel1.block

docker exec -e "CORE_PEER_LOCALMSPID=Org1MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org1.jiuxi.org peer channel list

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org2.jiuxi.org peer channel fetch 0 channel1.block -o orderer.jiuxi.org:7050 -c channel1

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org2.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org2.jiuxi.org peer channel join -b channel1.block

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org2.jiuxi.org peer channel list

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org2.jiuxi.org peer channel fetch 0 channel1.block -o orderer.jiuxi.org:7050 -c channel1

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org2.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org2.jiuxi.org peer channel join -b channel1.block

docker exec -e "CORE_PEER_LOCALMSPID=Org2MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org2.jiuxi.org peer channel list

10 小节

上面的步骤已经实现了创建联盟、创建静态组织（org1, org2, org3），其中每个组织都有 2 个 peer 节点，而且又创建了 ID 为 channel1 的通道，并把 org1 和 org2 的 2 个 peer 依次加入到该通道中。作为特殊，并没有将组织 org3 加入到通道中（当然你也可以加入，这里留给读者独爽）。下面再看看配置文件，理解一下：

JiuxiConsortium 就是自声明的联盟（联盟下静态定义了三个组织、JiuxiChannel 就是自声明的渠道（该渠道跟自声明联盟 Consortium 关联）。

11 深入

当然，你可以使用 org3 再创建一个通道，然后将其自身 2 个节点加入这个新的通道。相信你在理解上面的知识后，下面的操作简直容易到爆。步骤如下：

11.1 生成新的通道交易文件

configtxgen -profile JiuxiChannel -outputCreateChannelTx ./config/channel2.tx -channelID channel2

11.2 生成 Anchor 节点 MSP 文件

configtxgen -profile JiuxiChannel -outputAnchorPeersUpdate ./config/channel2Org3MSPanchors.tx -channelID channel2 -asOrg Org3MSP

11.3 创建通道

在 peer0.org3.jiuxi.org 节点上创建通道 channel2，并自身加入到通道 channel2：

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org3.jiuxi.org peer channel create -o orderer.jiuxi.org:7050 -c channel2 -f /etc/hyperledger/configtx/channel2.tx

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org3.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org3.jiuxi.org peer channel join -b channel2.block

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer0.org3.jiuxi.org peer channel list

在 peer1.org3.jiuxi.org 节点也需要加入到通道 channel2 中：

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org3.jiuxi.org peer channel fetch 0 channel2.block -o orderer.jiuxi.org:7050 -c channel2

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org3.jiuxi.org ls

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org3.jiuxi.org peer channel join -b channel2.block

docker exec -e "CORE_PEER_LOCALMSPID=Org3MSP" -e "CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/[email protected]/msp" peer1.org3.jiuxi.org peer channel list

自此，九析带你轻松完爆 hyperledger fabirc 创建静态组织。

第十三章 九析带你轻松完爆 hyperledger fabric - 创建静态组织

猜你喜欢

第十三章九析带你轻松完爆 hyperledger fabric - 创建静态组织