【Kubernetes】在CentOS7上通过kubeadm工具快速安装Kubernetes集群（一）

ps:Gpgcheck是GPG验证是否开启的选项，1是开启，0是不开启，一般情况可以关掉。
GPG是加密和数字签名的免费工具，大多用于加密信息的传递。除了仅用密码加密外，GPG最大的不同是提供了“公钥/私钥”对。利用一方的“公钥”别人加密信息不再需要告诉密码，随时随地都能发送加密信息。而这种加密是单向的，只有一方的“私钥”能解开加密。数字签名又是另一大使用方向。通过签名认证，别人能确保发布的消息来自一方，而且没有经过修改。

>>坑1：文件夹名kubernetes-el7-x86_64中el7打成了e17 = =

直接访问http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/ 可以看到该镜像仓库路径

访问根目录，可以看到阿里云提供的容器镜像列表：

2、使用yum install安装kubelet、kubeadm、kubectl

#yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes

其中--disableexcudes用于关闭配置文件中的排除

--disableexcludes=[repo]
                        disable exclude from main, for a repo or for
                        everything
--disableincludes=[repo]
                        disable includepkgs for a repo or for everything

>>坑2 出现Public key for XXX.rpm is not installed

参考文章：https://blog.csdn.net/cy309173854/article/details/69265738 配置失败，有待研究

使用阿里云给出的安装方式：

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
setenforce 0
yum install -y kubelet kubeadm kubectl
systemctl enable kubelet && systemctl start kubelet

安装成功

3、启动docker、kubelet并设置自动启动

systemctl enable kubelet && systemctl start kubelet

systemctl docker && systemctl start docker

4、查看kubeadm命令和参数列表

Available Commands:
alpha       Kubeadm experimental sub-commands
completion Output shell completion code for the specified shell (bash or zsh)
config      Manage configuration for a kubeadm cluster persisted in a ConfigMap in the cluster
help        Help about any command
init        Run this command in order to set up the Kubernetes control plane
join        Run this on any machine you wish to join an existing cluster
reset       Performs a best effort revert of changes made to this host by 'kubeadm init' or 'kubeadm join'
token       Manage bootstrap tokens
upgrade     Upgrade your cluster smoothly to a newer version with this command
version     Print the version of kubeadm

Flags:
      --add-dir-header           If true, adds the file directory to the header
-h, --help                     help for kubeadm
      --log-file string          If non-empty, use this log file
      --log-file-max-size uint   Defines the maximum size a log file can grow to. Unit is megabytes. If the value is 0, the maximum file size is unlimited. (default 1800)
      --rootfs string            [EXPERIMENTAL] The path to the 'real' host root filesystem.
      --skip-headers             If true, avoid header prefixes in the log messages
      --skip-log-headers         If true, avoid headers when opening log files
-v, --v Level                  number for the log level verbosity

5、导出默认配置、修改、备用

# cd /

# kubeadm config print init-defaults >init.default.yaml

# vim init.default.yaml

修改如下：

apiVersion: kubeadm.k8s.io/v1beta1
kind: ClusterConfiguration
imageRepository: docker.io/dustise
kubernetesVersion: v1.14.0
networking:
podSubnet: "192.168.0.0/16"

存储为init-config.yaml

6、下载Kubernetes相关镜像

# kubeadm config images pull --config=init-config.yaml

>>坑3

this version of kubeadm only supports deploying clusters with the control plane version >= 1.15.0. Current version: v1.14.0

通过报错内容可以看出书中提供的版本太老，不被当前kubeadm支持

单纯更改版本号kubernetesVersion: v1.15.0也会报错，由于本书提供的imageRepository：docker.io/dustise没有提供更新的版本

进去dockerHub查看：

可以看出没有更新的版本，关于Kubernetes镜像拉取问题，解决方式如下：

(1)查看当前配置中需求的镜像

[root@localhost /]# kubeadm config images list
k8s.gcr.io/kube-apiserver:v1.16.3
k8s.gcr.io/kube-controller-manager:v1.16.3
k8s.gcr.io/kube-scheduler:v1.16.3
k8s.gcr.io/kube-proxy:v1.16.3
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.3.15-0
k8s.gcr.io/coredns:1.6.2

(2)在dockerHub中寻找含有以上镜像的Repository，修改yaml文件

(3)或者参考https://blog.csdn.net/wchbest/article/details/88873965 拉取镜像后修改Tag

(4)https://blog.51cto.com/536410/2347614 中提供了一种在拉去镜像时指定镜像仓库的方法

kubeadm init \

--apiserver-advertise-address=192.168.92.56 \

--image-repository registry.aliyuncs.com/google_containers \

--kubernetes-version v1.13.1 \

--pod-network-cidr=10.244.0.0/16

7、运行kubeadm init命令安装Master

# kubeadm init --config=init-config.yaml

运行后，显示如下信息：

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.79.132:6443 --token mc8ng5.pi0094m1p8c90r9z \
--discovery-token-ca-cert-hash sha256:2476c042ff1997f8ae17098d5f581474102788756dd37f7859b496ad52eec052

按要求依次运行：

# mkdir -p $HOME/.kube
# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
# sudo chown $(id -u):$(id -g) $HOME/.kube/config

Master节点安装成功！

刺眼的宝石蓝

发布了27 篇原创文章 · 获赞 0 · 访问量 968

私信关注