protected void loadBeanDefinitions(XmlBeanDefinitionReader reader) throws IOException {
String[] configLocations = getConfigLocations();
if (configLocations != null) {
for (String configLocation : configLocations) {
reader.loadBeanDefinitions(configLocation);
}
}
}
这是解析过程最外围的代码，过程是很清晰的，首先要获取到配置文件的路径，这在之前已经完成了。然后将每个配置文件的路径，作为参数传给BeanDefinitionReader的loadBeanDefinitions方法里
public int loadBeanDefinitions(String location) throws BeanDefinitionStoreException {
return loadBeanDefinitions(location, null);
}
这个方法又调用了重载方法
public int loadBeanDefinitions(String location, Set<Resource> actualResources) throws BeanDefinitionStoreException {
ResourceLoader resourceLoader = getResourceLoader();
if (resourceLoader == null) {
throw new BeanDefinitionStoreException(
"Cannot import bean definitions from location [" + location + "]: no ResourceLoader available");
}
if (resourceLoader instanceof ResourcePatternResolver) {
// Resource pattern matching available.
try {
Resource[] resources = ((ResourcePatternResolver) resourceLoader).getResources(location);
int loadCount = loadBeanDefinitions(resources);
if (actualResources != null) {
for (Resource resource : resources) {
actualResources.add(resource);
}
}
if (logger.isDebugEnabled()) {
logger.debug("Loaded " + loadCount + " bean definitions from location pattern [" + location + "]");
}
return loadCount;
}
catch (IOException ex) {
throw new BeanDefinitionStoreException(
"Could not resolve bean definition resource pattern [" + location + "]", ex);
}
}
else {
// Can only load single resources by absolute URL.
Resource resource = resourceLoader.getResource(location);
int loadCount = loadBeanDefinitions(resource);
if (actualResources != null) {
actualResources.add(resource);
}
if (logger.isDebugEnabled()) {
logger.debug("Loaded " + loadCount + " bean definitions from location [" + location + "]");
}
return loadCount;
}
}
这个方法就比较长了，不过分析一下，流程还是很清晰的。
BeanDefinitionReader不能直接加载配置文件，需要把配置文件封装成Resource，然后才能调用重载方法loadBeanDefinitions()。所以这个方法其实就是2段，第一部分是委托ResourceLoader将配置文件封装成Resource，第二部分是调用loadBeanDefinitions()，对Resource进行解析
而这里的ResourceLoader，就是前面的XmlWebApplicationContext，因为ApplicationContext接口，是继承自ResourceLoader接口的
Resource也是一个接口体系，在web环境下，这里就是ServletContextResource
接下来进入重载方法loadBeanDefinitions()
public int loadBeanDefinitions(Resource... resources) throws BeanDefinitionStoreException {
Assert.notNull(resources, "Resource array must not be null");
int counter = 0;
for (Resource resource : resources) {
counter += loadBeanDefinitions(resource);
}
return counter;
}
这里就不用说了，就是把每一个Resource作为参数，继续调用重载方法。读spring源码，会发现重载方法特别多
public int loadBeanDefinitions(Resource resource) throws BeanDefinitionStoreException {
return loadBeanDefinitions(new EncodedResource(resource));
}
还是重载方法，不过这里对传进来的Resource又进行了一次封装，变成了编码后的Resource，问题不大
public int loadBeanDefinitions(EncodedResource encodedResource) throws BeanDefinitionStoreException {
Assert.notNull(encodedResource, "EncodedResource must not be null");
if (logger.isInfoEnabled()) {
logger.info("Loading XML bean definitions from " + encodedResource.getResource());
}
Set<EncodedResource> currentResources = this.resourcesCurrentlyBeingLoaded.get();
if (currentResources == null) {
currentResources = new HashSet<EncodedResource>(4);
this.resourcesCurrentlyBeingLoaded.set(currentResources);
}
if (!currentResources.add(encodedResource)) {
throw new BeanDefinitionStoreException(
"Detected cyclic loading of " + encodedResource + " - check your import definitions!");
}
try {
InputStream inputStream = encodedResource.getResource().getInputStream();
try {
InputSource inputSource = new InputSource(inputStream);
if (encodedResource.getEncoding() != null) {
inputSource.setEncoding(encodedResource.getEncoding());
}
return doLoadBeanDefinitions(inputSource, encodedResource.getResource());
}
finally {
inputStream.close();
}
}
catch (IOException ex) {
throw new BeanDefinitionStoreException(
"IOException parsing XML document from " + encodedResource.getResource(), ex);
}
finally {
currentResources.remove(encodedResource);
if (currentResources.isEmpty()) {
this.resourcesCurrentlyBeingLoaded.remove();
}
}
}
这个就是loadBeanDefinitions()的最后一个重载方法，比较长，可以拆看来看
Assert.notNull(encodedResource, "EncodedResource must not be null");
if (logger.isInfoEnabled()) {
logger.info("Loading XML bean definitions from " + encodedResource.getResource());
}
Set<EncodedResource> currentResources = this.resourcesCurrentlyBeingLoaded.get();
if (currentResources == null) {
currentResources = new HashSet<EncodedResource>(4);
this.resourcesCurrentlyBeingLoaded.set(currentResources);
}
if (!currentResources.add(encodedResource)) {
throw new BeanDefinitionStoreException(
"Detected cyclic loading of " + encodedResource + " - check your import definitions!");
}
这第一部分，是处理线程相关的工作，把当前正在解析的Resource，设置为当前Resource
try {
InputStream inputStream = encodedResource.getResource().getInputStream();
try {
InputSource inputSource = new InputSource(inputStream);
if (encodedResource.getEncoding() != null) {
inputSource.setEncoding(encodedResource.getEncoding());
}
return doLoadBeanDefinitions(inputSource, encodedResource.getResource());
}
finally {
inputStream.close();
}
}
这里是第二部分，是核心，首先把Resource还原为InputStream，然后调用实际解析的方法doLoadBeanDefinitions()。可以看到，这种命名方式是很值得学习的，一种业务方法，比如parse()，可能需要做一些外围的工作，然后实际解析的方法，可以命名为doParse()。这种doXXX()的命名方法，在很多开源框架中都有应用，比如logback等
接下来就看一下这个doLoadBeanDefinitions()方法
protected int doLoadBeanDefinitions(InputSource inputSource, Resource resource)
throws BeanDefinitionStoreException {
try {
int validationMode = getValidationModeForResource(resource);
Document doc = this.documentLoader.loadDocument(
inputSource, getEntityResolver(), this.errorHandler, validationMode, isNamespaceAware());
return registerBeanDefinitions(doc, resource);
}
catch (BeanDefinitionStoreException ex) {
throw ex;
}
catch (SAXParseException ex) {
throw new XmlBeanDefinitionStoreException(resource.getDescription(),
"Line " + ex.getLineNumber() + " in XML document from " + resource + " is invalid", ex);
}
catch (SAXException ex) {
throw new XmlBeanDefinitionStoreException(resource.getDescription(),
"XML document from " + resource + " is invalid", ex);
}
catch (ParserConfigurationException ex) {
throw new BeanDefinitionStoreException(resource.getDescription(),
"Parser configuration exception parsing XML from " + resource, ex);
}
catch (IOException ex) {
throw new BeanDefinitionStoreException(resource.getDescription(),
"IOException parsing XML document from " + resource, ex);
}
catch (Throwable ex) {
throw new BeanDefinitionStoreException(resource.getDescription(),
"Unexpected exception parsing XML document from " + resource, ex);
}
}
抛开处理异常的若干catch体，只看实体部分
int validationMode = getValidationModeForResource(resource); Document doc = this.documentLoader.loadDocument( inputSource, getEntityResolver(), this.errorHandler, validationMode, isNamespaceAware()); return registerBeanDefinitions(doc, resource);
这个流程也是很清晰的，首先确认校验模式，然后委托documentLoader，将InputStream读取成标准的Document对象，然后调用registerBeanDefinitions()，进行解析工作
这里注意两点
首先这个Document对象，是W3C定义的标准XML对象，跟spring无关。
其次这个registerBeanDefinitions方法，我觉得命名有点误导性。因为这个时候实际上解析还没有开始，怎么直接就注册了呢。比较好的命名，我觉得可以是parseAndRegisterBeanDefinitions()
接下来就看一下这个核心方法registerBeanDefinitions
public int registerBeanDefinitions(Document doc, Resource resource) throws BeanDefinitionStoreException {
BeanDefinitionDocumentReader documentReader = createBeanDefinitionDocumentReader();
documentReader.setEnvironment(this.getEnvironment());
int countBefore = getRegistry().getBeanDefinitionCount();
documentReader.registerBeanDefinitions(doc, createReaderContext(resource));
return getRegistry().getBeanDefinitionCount() - countBefore;
}
这个方法也很清楚，同样要注意2个事
首先，BeanDefinitionReader组件，也不是自己完成解析的，它要委托给BeanDefinitionDocumentReader来完成（BeanDefinitionDocumentReader还会有一次委托）。
其次，可以看到实际解析的方法registerBeanDefinitions()前后，还各有一个计数，这里调用了getRegistry()方法，来得到一个BeanRegistry。这里实际取到的是DefaultListableBeanFactory，因为这个类实现了BeanRegistry接口。（DefaultListableBeanFactory是一个非常重要的类，它不仅是BefanFactory的默认实现，而且大部分的ApplicationContext实现，内部都持有一个它的实例）
接下来就进入registerBeanDefinitions()方法看看
public void registerBeanDefinitions(Document doc, XmlReaderContext readerContext) {
this.readerContext = readerContext;
logger.debug("Loading bean definitions");
Element root = doc.getDocumentElement();
doRegisterBeanDefinitions(root);
}
处理完外围事务之后，进入doRegisterBeanDefinitions()方法，这种命名规范，上文已经介绍过了
protected void doRegisterBeanDefinitions(Element root) {
String profileSpec = root.getAttribute(PROFILE_ATTRIBUTE);
if (StringUtils.hasText(profileSpec)) {
Assert.state(this.environment != null, "environment property must not be null");
String[] specifiedProfiles = StringUtils.tokenizeToStringArray(profileSpec, BeanDefinitionParserDelegate.MULTI_VALUE_ATTRIBUTE_DELIMITERS);
if (!this.environment.acceptsProfiles(specifiedProfiles)) {
return;
}
}
// any nested <beans> elements will cause recursion in this method. In
// order to propagate and preserve <beans> default-* attributes correctly,
// keep track of the current (parent) delegate, which may be null. Create
// the new (child) delegate with a reference to the parent for fallback purposes,
// then ultimately reset this.delegate back to its original (parent) reference.
// this behavior emulates a stack of delegates without actually necessitating one.
BeanDefinitionParserDelegate parent = this.delegate;
this.delegate = createHelper(readerContext, root, parent);
preProcessXml(root);
parseBeanDefinitions(root, this.delegate);
postProcessXml(root);
this.delegate = parent;
}
这个方法也比较长，拆开来看
String profileSpec = root.getAttribute(PROFILE_ATTRIBUTE);
if (StringUtils.hasText(profileSpec)) {
Assert.state(this.environment != null, "environment property must not be null");
String[] specifiedProfiles = StringUtils.tokenizeToStringArray(profileSpec, BeanDefinitionParserDelegate.MULTI_VALUE_ATTRIBUTE_DELIMITERS);
if (!this.environment.acceptsProfiles(specifiedProfiles)) {
return;
}
}
如果配置文件中<beans>元素，配有profile属性，就会进入这一段，不过一般都是不会的
BeanDefinitionParserDelegate parent = this.delegate; this.delegate = createHelper(readerContext, root, parent); preProcessXml(root); parseBeanDefinitions(root, this.delegate); postProcessXml(root); this.delegate = parent;
然后这里创建了BeanDefinitionParserDelegate对象，preProcessXml()和postProcessXml()都是空方法，核心就是parseBeanDefinitions()方法。这里又把BeanDefinition解析和注册的工作，委托给了BeanDefinitionParserDelegate对象，在parseBeanDefinitions()方法中完成
总的来说，解析工作的委托链是这样的：XmlWebApplicationContext-->XmlBeanDefinitionReader-->DefaultBeanDefinitionDocumentReader-->BeanDefinitionParserDelegate
XmlWebApplicationContext作为最外围的组件，发起解析的请求。
XmlBeanDefinitionReader将配置文件路径封装为Resource，读取出w3c定义的Document对象，然后委托给DefaultBeanDefinitionDocumentReader。
DefaultBeanDefinitionDocumentReader就开始做实际的解析工作了，但是涉及到bean的具体解析，它还是会继续委托给BeanDefinitionParserDelegate来做
接下来在parseBeanDefinitions()方法中发生了什么，以及BeanDefinitionParserDelegate类完成的工作，在下一篇博客中继续说明