Centos7多网卡绑定配置(bond方式)

Centos6/7多网卡绑定配置
1. 关闭NetworkManager服务
systemctl stop NetworkManager
systemctl disable NetworkManager

2. 加载bond模块
modprobe bonding miimon=100 mode=0
echo "alias bond0 bonding" >>/etc/modprobe.d/bond.conf
echo "options bond0 miimon=100 mode=0" >> /etc/modprobe.d/bond.conf

3. 配置网卡文件，以网卡eth0、eth1做绑定为例
创建网卡bond0的配置文件
vim /etc/sysconfig/network-scripts/ifcfg-bond0
# 添加以下配置，IP地址、掩码、网关按实际填写
DEVICE=bond0
BOOTPROTO=static
USERCTL=no
ONBOOT=yes
TYPE=Bond
IPADDR=10.42.31.1
NETMASK=255.255.255.0
GATEWAY=10.42.31.1

#修改网卡eth0的配置文件
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
MASTER=bond0
SLAVE=yes

#修改网卡eth1的配置文件
vim /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE="eth1"
BOOTPROTO="none"
ONBOOT="yes"
USERCTL=no
MASTER=bond0
SLAVE=yes
4. 重启网络服务，确认网络是网卡速率;
systemctl restart network
ethtool bond0