版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
一、查看磁盘空间情况（df -h 方便阅读方式显示【但是计算式，1K=1000，而不是1K=1024】）
[root@MyServer ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
//文件系统 1K-块 已用 可用 已用% 挂载点
/dev/mapper/VolGroup-lv_root 8780808 7038920 1295836 85% /
tmpfs 1987056 16 1987040 1% /dev/shm
/dev/xvda1 495844 32680 437564 7% /boot
/dev/xvdb 72248648 1487312 67091320 3% /home/web二、 以inode模式来显示磁盘使用情况
[root@MyServer ~]# df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
//文件系统 Inode (I)已用 (I)可用 (I)已用% 挂载点
/dev/mapper/VolGroup-lv_root 558624 142630 415994 26% /
tmpfs 496764 5 496759 1% /dev/shm
/dev/xvda1 128016 38 127978 1% /boot
/dev/xvdb 4587520 27112 4560408 1% /home/web三、 查看磁盘信息（如果df查询出来的磁盘信息和fdisk -l 查询出来的差距几十个G，说明有磁盘没有用上）
[root@localhost ~]# fdisk -l //磁盘命令
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c4cb5
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2611 20458496 8e Linux LVM
Disk /dev/sdb: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd0f5c869
Device Boot Start End Blocks Id System
/dev/sdb1 1 2610 20964793+ 83 Linux
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
可以看到这台机器加载了三个磁盘sda、sdb、sdc
其中sda是初始磁盘，sdb已经初始化且经过使用，sdc是刚刚加载的，未格式化的新磁盘
四、创建新硬盘分区
[root@localhost ~]# fdisk /dev/sdc #进入磁盘
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x45a3cadb.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag #设定可启动标记
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition #删除一个分区
l list known partition types #各分区类型所对应的ID
m print this menu #菜单
n add a new partition #添加一个分区
o create a new empty DOS partition table
p print the partition table #显示该磁盘下的当前分区信息
q quit without saving changes #不保存退出
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit #保存退出
x extra functionality (experts only)
知道命令之后就可以进行分区了
Command (m for help): p //打印分区信息,可以看到当前并没有分区
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x45a3cadb
Device Boot Start End Blocks Id System
Command (m for help): n //创建一个新的分区
Command action
e extended//输入e为创建扩展分区
p primary partition (1-4) //输入p为创建逻辑分区
p
Partition number (1-4): 1//划分逻辑分区
First cylinder (1-2610, default 1): //我这里直接回车,是不想把该磁盘分成多个分区,把整个磁盘作为1个分区
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-2610, default 2610):
Using default value 2610
Command (m for help): p //再次查看可以看到该磁盘已经有1个分区了
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x45a3cadb
Device Boot Start End Blocks Id System
/dev/sdc1 1 2610 20964793+ 83 Linux
Command (m for help): w //保存分区
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
再次使用”fdisk -l”命令查看磁盘信息
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x406a4c58
Device Boot Start End Blocks Id System
/dev/sdc1 1 2610 20964793+ 83 Linux
第三块磁盘/dev/sdc已经分区好了
五、格式化分区
[root@localhost ~]# mkfs.ext3 /dev/sdc1
//将/dev/sdc1格式化为ext3类型,好像大部分的磁盘都是格式化为ext3类型,具体为什么没有深入研究,暂时不清楚,想了解的朋友可以自己查一下
[root@localhost ~]# mkfs.ext3 /dev/sdc1
mke2fs 1.41.12 (17-May-2010)
文件系统标签=
操作系统:Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5241198 blocks
262059 blocks (5.00%) reserved for the super user
第一个数据块=0
Maximum filesystem blocks=4294967296
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
格式化完毕，此时就可以使用“mount”命令挂载分区了，然后使用这个磁盘空间了
六、挂载分区以及开机自动挂载
[root@localhost ~]# df -h //此时只有sda1和sdb1两个磁盘挂载
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 18G 15G 1.5G 92% /
tmpfs 932M 76K 932M 1% /dev/shm
/dev/sda1 485M 40M 421M 9% /boot
/dev/sdb1 20G 1.2G 18G 7% /disk/diskone
/dev/sr0 4.2G 4.2G 0 100% /media/CentOS_6.5_Final
[root@localhost /]# cd /disk/
[root@localhost disk]# ll
总用量 4
drwxr-xr-x. 4 root root 4096 7月 28 17:04 diskone
[root@localhost disk]# cd diskone/
[root@localhost diskone]# ll
总用量 20
drwx------. 2 root root 16384 7月 28 16:12 lost+found
drwxr-xr-x. 2 root root 4096 7月 28 17:09 software
[root@localhost diskone]# cd ../
[root@localhost disk]# mkdir disktwo //创建被挂载的路径
[root@localhost disk]# ll
总用量 8
drwxr-xr-x. 4 root root 4096 7月 28 17:04 diskone
drwxr-xr-x. 2 root root 4096 8月 1 16:48 disktwo
[root@localhost disk]# mount /dev/sdc1 /disk/disktwo/ //进行挂载
[root@localhost disk]# df -h //再次查看,发现sdc1已经挂载在/disk/disktwo路径下
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 18G 15G 1.5G 92% /
tmpfs 932M 76K 932M 1% /dev/shm
/dev/sda1 485M 40M 421M 9% /boot
/dev/sdb1 20G 1.2G 18G 7% /disk/diskone
/dev/sr0 4.2G 4.2G 0 100% /media/CentOS_6.5_Final
/dev/sdc1 20G 173M 19G 1% /disk/disktwo
磁盘已经挂载上了
下面设置开机自动挂载
编辑/etc/fstab文件，再最后面添加
/dev/sdc1(磁盘分区) /disk/disktwo（挂载目录） ext3（文件格式）defaults 0 0
vim /etc/fstab
/dev/sdc1(磁盘分区) /disk/disktwo（挂载目录） ext3（文件格式）defaults 0 0
之后重启就好啦！！！