Nginx ("engine x") 是一个高性能的 HTTP和反向代理服务器,据说他可以同时处理10万的并发访问量,这个我就没法确认了。
Nginx官方地址是:http://nginx.org
上面提供了windows和unix版本的nginx,有稳定版也有开发板,可以根据具体情况选择。
现在开始我们的nginx之旅吧!
首先,从nginx下载了windows版本的压缩包,解压后看到
这样的目录结构,熟悉apache的朋友应该很快就明白各个目录的作用。比较重要的就是conf和html这两个文件夹,html是默认放置网站内容的文件夹,conf是配置文件放置的地方,打开conf发现
但是貌似只有fastcgi.conf和nginx.conf可以编辑。
打开nginx.conf文件:
#user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }
初学者看见这些可能已经头疼了,熟悉apache配置的朋友估计笑了。
我们就找几个重要的说说吧(当然想要让配置生效要先去掉前面的#号):
#linux/unix下那个用户运行nginx user nobody; #进程运行数量,根据cpu数量或其他需求配置 worker_processes 1; #错误日志 error_log logs/error.log; error_log logs/error.log notice; error_log logs/error.log info; #nginx的pid配置 pid百度百科:http://baike.baidu.com/view/402830.htm#2 pid logs/nginx.pid; #每个进程的最大连接数量,最大连接数量=worker_processes*worker_connections events { worker_connections 1024; } http { #mime类型配置,mime百度百科:http://baike.baidu.com/view/160611.htm include mime.types; default_type application/octet-stream; #日志格式化,可以根据情况自己调整 log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; #sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,对于普通应用,必须设为 on,如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,以平衡磁盘与网络I/O处理速度,降低系统的uptime. sendfile on; #tcp_nopush配置,tcp_nopush和tcp_nodelay开启可以提高nginx性能,具体作用:http://www.oschina.net/question/17_2516 tcp_nopush on; #连接活动时间,即超时时间 keepalive_timeout 65; #压缩传输,gzip百度百科:http://baike.baidu.com/view/966625.htm gzip on; #服务配置 server { #监听端口,即什么端口可以访问到nginx,与tomcat,apache一样 listen 80; #服务器名称 server_name localhost; #文字编码 charset koi8-r; access_log logs/host.access.log main; location / { #默认网页放置位置,就是我们上面说到的html文件夹 root html; #主页,类似于<welcome-file-list> index index.html index.htm; } #错误页面 error_page 404 /404.html; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # 设置php代理,即php处理服务器,比如127.0.0.1:80是apache服务器,就交由apache处理php的请求 location ~ \.php$ { #代理服务器地址,eg:http://127.0.0.1:8080,端口为80,"80"可省略 proxy_pass http://127.0.0.1; } #php FastCGI服务器的一些配置 location ~ \.php$ { root html; #定义解析php程序使用的FastCGI接口 fastcgi_pass 127.0.0.1:9000; #php首页 fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } # 第一台虚拟主机,当需要用到多台虚拟住址的时候,只有复制server{}中的内容就可以了 server { listen 8000; listen somename:8080; server_name somename alias another.alias; location / { root html; index index.html index.htm; } } # HTTPS 服务器 server { listen 443; server_name localhost; ssl on; ssl_certificate cert.pem; ssl_certificate_key cert.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { root html; index index.html index.htm; } } }
在windows下启动nginx非常简单,运行nginx.exe就可以了,打开测试地址:http://127.0.0.1看看是否显示了nginx的欢迎页,显示说明已经成功启动。
下面说下linux下安装nginx:
linux下安装nginx需要PCRE的支持,PCRE:http://www.pcre.org/,按照网站上的指导安装即可。
安装之前可以先删除已经安装的低版本的pcre:
#查找已安装的pcre rpm -qa|grep pcre #显示结果为:pcre-6.6-2.el5_1.7 #在删除系统自带的PCRE之前,要先备份一下libpcre.so.0这个文件,rpm有关联性,当强制删除pcre时libpcre.so.0也会被删除,这样就会导致新的pcre安装不上,不信你可以试试 cp /lib/libpcre.so.0 /home/g21121/ #删除pcre rpm -e --nodeps pcre-6.6-2.el5_1.7
然后安装新的pcre:
#赋予执行权限 chmod 755 pcre-8.30 #解压pcre tar -zxvf pcre-8.30 #进入pcre目录 cd pcre-8.30 #拷贝libpcre.so.0到lib cp /home/g21121/libpcre.so.0 /lib/ #采用默认路径就可以,避免没必要的麻烦 ./configure #编译 make #安装 make install
安装pcre 注意执行顺序,先拷贝再删除,再拷贝再安装,这样就成功了。
安装完成后,我们开始安装nginx:
./configure --without-http_rewrite_module --without-http_gzip_module make make install
安装完成,如果安装过程中遇到错误,可以根据提示增加configure后面的参数即可,下面是configure的参数列表:
–sbin-path=<path> - nginx可执行命令的文件,如果没有指定,默认为<prefix>/sbin/nginx。
–conf-path=<path> - 在没有使用-c参数指定的情况下nginx.conf的默认位置,如果没有指定,默认为<prefix>/conf/nginx.conf。
–pid-path=<path> - nginx.pid的路径,如果没有在nginx.conf中通过“pid”指令指定,默认为<prefix>/logs/nginx.pid。
–lock-path=<path> - nginx.lock文件路径,如果没有指定,默认为<prefix>/logs/nginx.lock。
–error-log-path=<path> - 当没有在nginx.conf中使用“error_log”指令指定时的错误日志位置,如果没有指定,默认为<prefix>/logs/error.log。
–http-log-path=<path> - 当没有在nginx.conf中使用“access_log”指令指定时的访问日志位置,如果没有指定,默认为<prefix>/logs/access.log。
–user=<user> - 当没有在nginx.conf中使用“user”指令指定时nginx运行的用户,如果没有指定,默认为“nobody”。
–group=<group> - 当没有在nginx.conf中使用“user”指令指定时nginx运行的组,如果没有指定,默认为“nobody”。
–builddir=DIR - 设置构建目录。
–with-rtsig_module - 启用rtsig模块。
–with-select_module –without-select_module - 如果在configure的时候没有发现kqueue, epoll, rtsig或/dev/poll其中之一,select模块始终为启用状态。
–with-poll_module –without-poll_module - 如果在configure的时候没有发现kqueue, epoll, rtsig或/dev/poll其中之一,poll模块始终为启用状态。
–with-http_ssl_module - 启用ngx_http_ssl_module,启用SSL支持并且能够处理HTTPS请求。需要OpenSSL,在Debian系统中,对应的包为libssl-dev。
–with-http_realip_module - 启用ngx_http_realip_module
–with-http_addition_module - 启用ngx_http_addition_module
–with-http_sub_module - 启用ngx_http_sub_module
–with-http_dav_module - 启用ngx_http_dav_module
–with-http_flv_module - 启用ngx_http_flv_module
–with-http_stub_status_module - 启用”server status”(服务状态)页
–without-http_charset_module - 禁用ngx_http_charset_module
–without-http_gzip_module - 禁用ngx_http_gzip_module,如果启用,需要zlib包。
–without-http_ssi_module - 禁用ngx_http_ssi_module
–without-http_userid_module - 禁用ngx_http_userid_module
–without-http_access_module - 禁用ngx_http_access_module
–without-http_auth_basic_module - 禁用ngx_http_auth_basic_module
–without-http_autoindex_module - 禁用ngx_http_autoindex_module
–without-http_geo_module - 禁用ngx_http_geo_module
–without-http_map_module - 禁用ngx_http_map_module
–without-http_referer_module - 禁用ngx_http_referer_module
–without-http_rewrite_module - 禁用ngx_http_rewrite_module。如果启用,需要PCRE包。
–without-http_proxy_module - 禁用ngx_http_proxy_module
–without-http_fastcgi_module - 禁用ngx_http_fastcgi_module
–without-http_memcached_module - 禁用ngx_http_memcached_module
–without-http_limit_zone_module - 禁用ngx_http_limit_zone_module
–without-http_empty_gif_module - 禁用ngx_http_empty_gif_module
–without-http_browser_module - 禁用ngx_http_browser_module
–without-http_upstream_ip_hash_module - 禁用ngx_http_upstream_ip_hash_module
–with-http_perl_module - 启用ngx_http_perl_module
–with-perl_modules_path=PATH - 为perl模块设置路径
–with-perl=PATH - 为perl库设置路径
–http-client-body-temp-path=PATH - 为http连接的请求实体临时文件设置路径,如果没有指定,默认为<prefix>/client_body_temp
–http-proxy-temp-path=PATH - 为http代理临时文件设置路径,如果没有指定,默认为<prefix>/proxy_temp
–http-fastcgi-temp-path=PATH - 为http fastcgi临时文件设置路径,如果没有指定,默认为<prefix>/fastcgi_temp
–without-http - 禁用HTTP服务
–with-mail - 启用IMAP4/POP3/SMTP代理模块
–with-mail_ssl_module - 启用ngx_mail_ssl_module
–with-cc=PATH - 设置C编译器路径
–with-cpp=PATH - 设置C预处理器路径
–with-cc-opt=OPTIONS - 变量CFLAGS中附加的参数,用于FreeBSD中的PCRE库,同样需要指定–with-cc-opt=”-I /usr/local/include”,如果我们使用select()函数则需要同时增加文件描述符数量,可以通过–with-cc-opt=”-D FD_SETSIZE=2048”指定。
–with-ld-opt=OPTIONS - 通过连接器的附加参数,用于FreeBSD中的PCRE库,同样需要指定–with-ld-opt=”-L /usr/local/lib”。
–with-cpu-opt=CPU - 指定编译的CPU,可用的值为: pentium, pentiumpro, pentium3, pentium4, athlon, opteron, amd64, sparc32, sparc64, ppc64
–without-pcre - 禁用PCRE库文件,同时将禁用HTTP rewrite 模块,如果要在”location”指令中使用正则表达式,同样需要PCRE库。
–with-pcre=DIR - 设置PCRE库源文件路径。
–with-pcre-opt=OPTIONS - 在编译时为PCRE设置附加参数。
–with-md5=DIR - 设置md5库源文件路径。
–with-md5-opt=OPTIONS - 在编译时为md5设置附加参数。
–with-md5-asm - 使用md5汇编源。
–with-sha1=DIR - 设置sha1库源文件路径。
–with-sha1-opt=OPTIONS - 在编译时为sha1设置附加参数。
–with-sha1-asm - 使用sha1汇编源。
–with-zlib=DIR - 设置zlib库源文件路径。
–with-zlib-opt=OPTIONS - 在编译时为zlib设置附加参数。
–with-zlib-asm=CPU - 为指定的CPU使用zlib汇编源进行优化,可用值为: pentium, pentiumpro。
–with-openssl=DIR - 设置openssl库源文件路径。
–with-openssl-opt=OPTIONS - 在编译时为openssl设置附加参数。
–with-debug - 启用debug记录。
–add-module=PATH - 增加一个在PATH中的第三方模块。