Mongodb（三）Mongodb复制

其他 2019-06-24 08:36:01 阅读次数: 0

（一）MongDB复制（副本集）
MongDB复制是将数据同步到多个服务器的过程。
复制提供了数据的冗余备份，并在服务器上存储数据副本，提高数据的可用性，保证数据的安全性，
复制允许你从硬件和服务的中断中恢复数据，能随时应对数据丢失、机器损坏带来的风险。
而且复制还能提高读取能力，用户读取服务器和写入服务器在不同的地方，提高整个系统的负载。

1、复制的特性：
        保障数据的安全性
        数据的高可用性7*24
        灾难恢复
        无需停机维护
        分布式读取数据
2、复制的原理
Mongodb复制集由一组Mongod实例（进程）组成。mongodb复制至少需要二个节点，一个是Primary主节点用于处理客户端的请求，其余都是从节点Secondary用于复制主节点上的数据.
Primary会记录那些写的操作到一个日志oplog中，其他的Secondary会定期轮询主节点这个日志，去操作他们的数据库来保持数据库的一致。
![](https://s1.51cto.com/107?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)
客户端从主节点读取数据，在客户端写入数据到主节点时， 主节点与从节点进行数据交互保障数据的一致性。
MongoDB（3.2以上）中，官方已经不推荐使用主从模式，取而代之的，是使用复制集（Replica Set）的方式做主备处理。

3、复制集（Replica Set），在复制集中，有且只有一个主节点(primary)，可以包含一个或多个从节点(secondary)，主从节点直接会通过心跳检测来确定节点是否健康或存活。所有的读写操作都是在主节点上进行的，如果要实现读写分离，需要进行相应的处理，这个最后会说。从节点会根据oplog（也就是操作日志）来复制主节点的数据。

原理：而 MongoDB 复制集,集群中的任何节点都可能成为 Master 节点。一旦 Master 节点故障,则会在其余节点中选举出一个新的 Master 节点。 并引导剩余节点连接到新的 Master 节点。这个过程对于应用是透明的。

在生产环境，复制集至少包括三个节点，其中一个必须为主节点，一个从节点，一个仲裁节点。其中每一个节点都是mongod进程对应的实例，节点间通过心跳检查对方的状态。
primary节点：负责数据库的读写操作。
secondary节点：备份primary节点上的数据，可以有多个。
arbiter节点：主节点故障时，参与复制集剩下节点中选举一个新的primary节点。

（二）、mongodb环境配置
1、主机配置
192.168.4.203 db1 ##primary节点
192.168.4.97 db2 ##secondary节点
192.168.4.200 db3 ##arbriter节点
2、安装（略）请参考https://blog.51cto.com/liqingbiao/2401942

        3、primary节点的相关操作。

           3.1、相关主节点的配置
[root@otrs ~]# vim /usr/local/mongodb/conf/master.conf 
bind_ip = 0.0.0.0
port    = 27017
dbpath  = /data/mongodb/db
logpath = /data/mongodb/mongodb.log
logappend = true
fork    = true
journal=true
maxConns=1000
auth  = true
keyFile = /usr/local/mongodb/mongodb-keyfile
storageEngine=wiredTiger
oplogSize=2048
replSet=RS

keyFile = /usr/local/mongodb/mongodb-keyfile   ##### 集群的私钥的完整路径，只对于Replica Set 架构有效（noauth = true时不用配置此项）

3.2、在服务器上生成私钥，并设置成600，把该私钥scp到其它远程服务器上。 
[root@otrs ~]# openssl rand -base64 745 > /usr/local/mongodb/mongodb-keyfile
[root@otrs ~]# chmod 600 /usr/local/mongodb/mongodb-keyfile 
[root@otrs ~]# cat /usr/local/mongodb/mongodb-keyfile 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[root@otrs ~]# scp /usr/local/mongodb/mongodb-keyfile [email protected]:/usr/local/mongodb/
mongodb-keyfile                                                                               100% 1012     1.0KB/s   00:00

3.3、创建认证用户。由于配置文件启用认证模式，现在需要以非认证的模式来创建用户。
#```
#######先以非验证模式启动数据库
[root@otrs ~]# /usr/local/mongodb/bin/mongod --fork --dbpath=/data/mongodb/db --logpath=/data/mongodb/mongodb.log
about to fork child process, waiting until server is ready for connections.
forked process: 28389
child process started successfully, parent exiting
[root@otrs ~]# netstat -lntp|grep mongod
tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 28389/mongod
############创建root用户并配置管理员权限
[root@otrs ~]# mongo
MongoDB shell version v4.0.9
connecting to: mongodb://127.0.0.1:27017/?gssapiServiceName=mongodb
Implicit session: session { "id" : UUID("4df82588-c03c-49e5-8839-92dafd7ff8ce") }
MongoDB server version: 4.0.9
Welcome to the MongoDB shell.
For interactive help, type "help".
For more comprehensive documentation, see
http://docs.mongodb.org/
Questions? Try the support group
http://groups.google.com/group/mongodb-user
Server has startup warnings:
2019-06-14T16:02:56.903+0800 I CONTROL [initandlisten]
2019-06-14T16:02:56.903+0800 I CONTROL [initandlisten] WARNING: Access control is not enabled for the database.
2019-06-14T16:02:56.903+0800 I CONTROL [initandlisten] Read and write access to data and configuration is unrestricted.
2019-06-14T16:02:56.903+0800 I CONTROL [initandlisten]

show dbs
admin 0.000GB
config 0.000GB
local 0.000GB
use admin
switched to db admin
db.createUser({ user: "root", pwd: "root", roles: [ { role: "root", db: "admin" } ] });
"user" : "root",
"roles" : [
{
"role" : "root",
"db" : "admin"
}
]
}

3.4、启动以验证权限的配置文件

[root@otrs ~]# mongod --config /usr/local/mongodb/conf/master.conf
about to fork child process, waiting until server is ready for connections.
forked process: 28698
child process started successfully, parent exiting
[root@otrs ~]# ps -ef|grep mongod
root 28698 1 19 16:19 ? 00:00:01 mongod --config /usr/local/mongodb/conf/master.conf
root 28731 28040 0 16:19 pts/0 00:00:00 grep --color=auto mongod 

4、配置secondary节点
4.1、新建目录编辑配置文件

[root@otrs004097 opt]# mkdir /data/mongodb/standard
[root@otrs004097 opt]# cat /usr/local/mongodb/conf/standard.conf
bind_ip = 0.0.0.0
port = 27017
dbpath = /data/mongodb/standard
logpath = /data/mongodb/mongodb.log
logappend = true
fork = true
journal=true
maxConns=1000
auth = true
keyFile = /usr/local/mongodb/mongodb-keyfile
storageEngine=wiredTiger
oplogSize=2048
replSet=RS

4.2、启动服务

[root@otrs004097 opt]# /usr/local/mongodb/bin/mongod --fork --config /usr/local/mongodb/conf/standard.conf
[root@otrs004097 opt]# netstat -lntp|grep mongod
tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN 1045/mongod 

5、配置arbriter节点

[root@NginxServer01 mongodb]# cat /usr/local/mongodb/conf/arbiter.conf
bind_ip = 0.0.0.0
port = 27017
dbpath = /data/mongodb/arbiter
logpath = /data/mongodb/mongodb.log
logappend = true
fork = true
journal=true
maxConns=1000
auth = true
keyFile = /usr/local/mongodb/mongodb-keyfile
storageEngine=wiredTiger
oplogSize=2048
replSet=RS
[root@NginxServer01 mongodb]# /usr/local/mongodb/bin/mongod --config /usr/local/mongodb/conf/arbiter.conf
about to fork child process, waiting until server is ready for connections.
forked process: 26321
child process started successfully, parent exiting
[root@NginxServer01 mongodb]# netstat -lntp|grep mongod
tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN 26321/mongod 

6、在primary节点服务器上，初始化复制集primary节点、添加secondary节点和arbriter节点。
6.1、初始化primary节点

[root@otrs ~]# mongo -uroot -p
MongoDB shell version v4.0.9
Enter password:
#########查看副本集的状态，发现并未初始化，接下来进行初始化。
rs.status()
{
"ok" : 0,
"errmsg" : "no replset config has been received",
"code" : 94,
"codeName" : "NotYetInitialized"
}

#########进行config的配置
config={"_id":"RS","members":[ {"_id":0,"host":"192.168.4.203:27017"},{"_id":1,"host":"192.168.4.97:27017"}]}
{
"_id" : "RS",
"members" : [
{
"_id" : 0,
"host" : "192.168.4.203:27017"
},
{
"_id" : 1,
"host" : "192.168.4.97:27017"
}
]
}

rs.initiate(config); #######初始化
{ "ok" : 1 }

6.2、查看副本集的状态

RS:SECONDARY> rs.status()
{
    "set" : "RS",
    "date" : ISODate("2019-06-14T09:01:19.722Z"),
    "myState" : 2,
    "term" : NumberLong(0),
    "syncingTo" : "",
    "syncSourceHost" : "",
    "syncSourceId" : -1,
    "heartbeatIntervalMillis" : NumberLong(2000),
    "optimes" : {
        "lastCommittedOpTime" : {
            "ts" : Timestamp(0, 0),
            "t" : NumberLong(-1)
        },
        "appliedOpTime" : {
            "ts" : Timestamp(1560502874, 1),
            "t" : NumberLong(-1)
        },
        "durableOpTime" : {
            "ts" : Timestamp(1560502874, 1),
            "t" : NumberLong(-1)
        }
    },
    "lastStableCheckpointTimestamp" : Timestamp(0, 0),
    "members" : [
        {
            "_id" : 0,
            "name" : "192.168.4.203:27017",
            "health" : 1,
            "state" : 2,
            "stateStr" : "SECONDARY",
            "uptime" : 2525,
            "optime" : {
                "ts" : Timestamp(1560502874, 1),
                "t" : NumberLong(-1)
            },
            "optimeDate" : ISODate("2019-06-14T09:01:14Z"),
            "syncingTo" : "",
            "syncSourceHost" : "",
            "syncSourceId" : -1,
            "infoMessage" : "could not find member to sync from",
            "configVersion" : 1,
            "self" : true,
            "lastHeartbeatMessage" : ""
        },
        {
            "_id" : 1,
            "name" : "192.168.4.97:27017",
            "health" : 1,
            "state" : 2,
            "stateStr" : "SECONDARY",
            "uptime" : 5,
            "optime" : {
                "ts" : Timestamp(1560502874, 1),
                "t" : NumberLong(-1)
            },
            "optimeDurable" : {
                "ts" : Timestamp(1560502874, 1),
                "t" : NumberLong(-1)
            },
            "optimeDate" : ISODate("2019-06-14T09:01:14Z"),
            "optimeDurableDate" : ISODate("2019-06-14T09:01:14Z"),
            "lastHeartbeat" : ISODate("2019-06-14T09:01:19.645Z"),
            "lastHeartbeatRecv" : ISODate("2019-06-14T09:01:19.489Z"),
            "pingMs" : NumberLong(1),
            "lastHeartbeatMessage" : "",
            "syncingTo" : "",
            "syncSourceHost" : "",
            "syncSourceId" : -1,
            "infoMessage" : "",
            "configVersion" : 1
        }
    ],
    "ok" : 1
}

6.3、由初始化结果查看，两个都是secondary节点，由于数据库同步没有完成，等同步完成的时候会变成primary节点。等两分钟再次查看下

             RS:PRIMARY> rs.status()
{
    "set" : "RS",
    "date" : ISODate("2019-06-14T09:11:17.382Z"),
    "myState" : 1,
    "term" : NumberLong(1),
    "syncingTo" : "",
    "syncSourceHost" : "",
    "syncSourceId" : -1,
    "heartbeatIntervalMillis" : NumberLong(2000),
    "optimes" : {
        "lastCommittedOpTime" : {
            "ts" : Timestamp(1560503477, 1),
            "t" : NumberLong(1)
        },
        "readConcernMajorityOpTime" : {
            "ts" : Timestamp(1560503477, 1),
            "t" : NumberLong(1)
        },
        "appliedOpTime" : {
            "ts" : Timestamp(1560503477, 1),
            "t" : NumberLong(1)
        },
        "durableOpTime" : {
            "ts" : Timestamp(1560503477, 1),
            "t" : NumberLong(1)
        }
    },
    "lastStableCheckpointTimestamp" : Timestamp(1560503427, 1),
    "members" : [
        {
            "_id" : 0,
            "name" : "192.168.4.203:27017",
            "health" : 1,
            "state" : 1,
            "stateStr" : "PRIMARY",
            "uptime" : 3123,
            "optime" : {
                "ts" : Timestamp(1560503477, 1),
                "t" : NumberLong(1)
            },
            "optimeDate" : ISODate("2019-06-14T09:11:17Z"),
            "syncingTo" : "",
            "syncSourceHost" : "",
            "syncSourceId" : -1,
            "infoMessage" : "",
            "electionTime" : Timestamp(1560502885, 1),
            "electionDate" : ISODate("2019-06-14T09:01:25Z"),
            "configVersion" : 1,
            "self" : true,
            "lastHeartbeatMessage" : ""
        },
        {
            "_id" : 1,
            "name" : "192.168.4.97:27017",
            "health" : 1,
            "state" : 2,
            "stateStr" : "SECONDARY",
            "uptime" : 603,
            "optime" : {
                "ts" : Timestamp(1560503467, 1),
                "t" : NumberLong(1)
            },
            "optimeDurable" : {
                "ts" : Timestamp(1560503467, 1),
                "t" : NumberLong(1)
            },
            "optimeDate" : ISODate("2019-06-14T09:11:07Z"),
            "optimeDurableDate" : ISODate("2019-06-14T09:11:07Z"),
            "lastHeartbeat" : ISODate("2019-06-14T09:11:15.995Z"),
            "lastHeartbeatRecv" : ISODate("2019-06-14T09:11:16.418Z"),
            "pingMs" : NumberLong(0),
            "lastHeartbeatMessage" : "",
            "syncingTo" : "192.168.4.203:27017",
            "syncSourceHost" : "192.168.4.203:27017",
            "syncSourceId" : 0,
            "infoMessage" : "",
            "configVersion" : 1
        }
    ],
    "ok" : 1,
    "operationTime" : Timestamp(1560503477, 1),
    "$clusterTime" : {
        "clusterTime" : Timestamp(1560503477, 1),
        "signature" : {
            "hash" : BinData(0,"iR63R/X7QanbrWvuDJNkpdPgcVY="),
            "keyId" : NumberLong("6702308864978583553")
        }
    }
}

6.4、在secondary服务器上查看同步日志

 [root@otrs004097 opt]# tail  -f /data/mongodb/mongodb.log 
 2019-06-14T17:01:15.870+0800 I REPL     [replexec-0] This node is 192.168.4.97:27017 in the config
2019-06-14T17:01:15.870+0800 I REPL     [replexec-0] transition to STARTUP2 from STARTUP
2019-06-14T17:01:15.871+0800 I REPL     [replexec-0] Starting replication storage threads
2019-06-14T17:01:15.872+0800 I REPL     [replexec-2] Member 192.168.4.203:27017 is now in state SECONDARY
2019-06-14T17:01:15.872+0800 I STORAGE  [replexec-0] createCollection: local.temp_oplog_buffer with generated UUID: 2e5c6683-a67b-4a16-bd9b-8672ee4db900
2019-06-14T17:01:15.880+0800 I REPL     [replication-0] Starting initial sync (attempt 1 of 10)
2019-06-14T17:01:15.881+0800 I STORAGE  [replication-0] Finishing collection drop for local.temp_oplog_buffer (2e5c6683-a67b-4a16-bd9b-8672ee4db900).
2019-06-14T17:01:15.882+0800 I STORAGE  [replication-0] createCollection: local.temp_oplog_buffer with generated UUID: c25fa3cf-cae9-430b-b514-f13c3ab1e247
2019-06-14T17:01:15.889+0800 I REPL     [replication-0] sync source candidate: 192.168.4.203:27017
2019-06-14T17:01:15.889+0800 I REPL     [replication-0] Initial syncer oplog truncation finished in: 0ms
2019-06-14T17:01:15.889+0800 I REPL     [replication-0] ******
2019-06-14T17:01:15.889+0800 I REPL     [replication-0] creating replication oplog of size: 2048MB...
2019-06-14T17:01:15.889+0800 I STORAGE  [replication-0] createCollection: local.oplog.rs with generated UUID: f35caf0a-f2da-4cf7-b16b-34a94f1e25a7
2019-06-14T17:01:15.892+0800 I STORAGE  [replication-0] Starting OplogTruncaterThread local.oplog.rs
2019-06-14T17:01:15.892+0800 I STORAGE  [replication-0] The size storer reports that the oplog conta××× 0 records totaling to 0 bytes
2019-06-14T17:01:15.892+0800 I STORAGE  [replication-0] Scanning the oplog to determine where to place markers for truncation
2019-06-14T17:01:15.905+0800 I REPL     [replication-0] ******
2019-06-14T17:01:15.905+0800 I STORAGE  [replication-0] dropAllDatabasesExceptLocal 1
    6.5、添加arbriter仲裁节点
RS:PRIMARY> rs.addArb("192.168.4.45:27017")
{
"ok" : 1,
"operationTime" : Timestamp(1560504144, 1),
"$clusterTime" : {
"clusterTime" : Timestamp(1560504144, 1),
"signature" : {
    "hash" : BinData(0,"um2WmD60Gh9q/43qUff8yN2abIw="),
    "keyId" : NumberLong("6702308864978583553")
}
}
}

##########查看复制集的状态
RS:PRIMARY> rs.status()
{
"set" : "RS",
"date" : ISODate("2019-06-14T09:40:04.334Z"),
"myState" : 1,
"term" : NumberLong(1),
"syncingTo" : "",
"syncSourceHost" : "",
"syncSourceId" : -1,
"heartbeatIntervalMillis" : NumberLong(2000),
"optimes" : {
"lastCommittedOpTime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"readConcernMajorityOpTime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"appliedOpTime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"durableOpTime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
}
},
"lastStableCheckpointTimestamp" : Timestamp(1560505167, 1),
"members" : [
{
"_id" : 0,
"name" : "192.168.4.203:27017",
"health" : 1,
"state" : 1,
"stateStr" : "PRIMARY",
"uptime" : 4850,
"optime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"optimeDate" : ISODate("2019-06-14T09:39:57Z"),
"syncingTo" : "",
"syncSourceHost" : "",
"syncSourceId" : -1,
"infoMessage" : "",
"electionTime" : Timestamp(1560502885, 1),
"electionDate" : ISODate("2019-06-14T09:01:25Z"),
"configVersion" : 2,
"self" : true,
"lastHeartbeatMessage" : ""
},
{
"_id" : 1,
"name" : "192.168.4.97:27017",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 2330,
"optime" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"optimeDurable" : {
"ts" : Timestamp(1560505197, 1),
"t" : NumberLong(1)
},
"optimeDate" : ISODate("2019-06-14T09:39:57Z"),
"optimeDurableDate" : ISODate("2019-06-14T09:39:57Z"),
"lastHeartbeat" : ISODate("2019-06-14T09:40:02.717Z"),
"lastHeartbeatRecv" : ISODate("2019-06-14T09:40:02.767Z"),
"pingMs" : NumberLong(0),
"lastHeartbeatMessage" : "",
"syncingTo" : "192.168.4.203:27017",
"syncSourceHost" : "192.168.4.203:27017",
"syncSourceId" : 0,
"infoMessage" : "",
"configVersion" : 2
},
{
"_id" : 2,
"name" : "192.168.4.45:27017",
"health" : 1,
"state" : 7,
"stateStr" : "ARBITER",
"uptime" : 11,
"lastHeartbeat" : ISODate("2019-06-14T09:40:02.594Z"),
"lastHeartbeatRecv" : ISODate("2019-06-14T09:40:04.186Z"),
"pingMs" : NumberLong(0),
"lastHeartbeatMessage" : "",
"syncingTo" : "",
"syncSourceHost" : "",
"syncSourceId" : -1,
"infoMessage" : "",
"configVersion" : 2
}
],
"ok" : 1,
"operationTime" : Timestamp(1560505197, 1),
"$clusterTime" : {
"clusterTime" : Timestamp(1560505197, 1),
"signature" : {
"hash" : BinData(0,"Ff00RyXUvxDPc5nzFQYXGZIlnBc="),
"keyId" : NumberLong("6702308864978583553")
}
}
}

备注：
"health" : 1,——————是1，表示健康状态

"stateStr" : "PRIMARY",——————主

"stateStr" : "SECONDARY",——————从

"stateStr" : "ARBITER",——————仲裁

7、查看primary节点、secondary节点、arbriter节点的数据的变化
7.1、主节点Parimary操作，创建表并插入数据。
8.RS:PRIMARY> use lqb
switched to db lqb
RS:PRIMARY> db.object.×××ert([{"language":"C"},{"language":"C++"}])
BulkWriteResult({
"writeErrors" : [ ],
"writeConcernErrors" : [ ],
"nInserted" : 2,
"nUpserted" : 0,
"nMatched" : 0,
"nModified" : 0,
"nRemoved" : 0,
"upserted" : [ ]
})
RS:PRIMARY> db.object.find()
{ "_id" : ObjectId("5d0370424e7535b767bb7098"), "language" : "C" }
{ "_id" : ObjectId("5d0370424e7535b767bb7099"), "language" : "C++" }

7.2、从节点操作。查看有数据同步到
RS:SECONDARY> use lqb;
switched to db lqb
RS:SECONDARY> rs.slaveOk();
RS:SECONDARY> db.object.find()
{ "_id" : ObjectId("5d0370424e7535b767bb7099"), "language" : "C++" }
{ "_id" : ObjectId("5d0370424e7535b767bb7098"), "language" : "C" }

7.3、仲裁节点aribriter。仲裁节点不会存储数据
RS:ARBITER> use lqb;
switched to db lqb
RS:ARBITER> show tables
Warning: unable to run listCollections, attempting to approximate collection names by parsing connectionStatus
RS:ARBITER> db.object.find()
Error: error: {
"ok" : 0,
"errmsg" : "not authorized on lqb to execute command { find: \"object\", filter: {}, lsid: { id: UUID(\"d2d7e624-8f30-468a-a3b0-79728b0cabbd\") }, $readPreference: { mode: \"secondaryPreferred\" }, $db: \"lqb\" }",
"code" : 13,

8、结论：
结论一：当主节点挂了得时候，从节点会变成主节点，当原先的主节点恢复的时候，会变成从节点，主节点不变。
结论二：主节点能写，从节点不能写。
结论三：主从节点的角色换了得话，原先的读写也就换了。

转载于:https://blog.51cto.com/liqingbiao/2409237

猜你喜欢

转载自blog.csdn.net/weixin_34120274/article/details/92814877
今日推荐
Arc Browser for Windows 1.0 正式 GA
90后程序员开发视频搬运软件、不到一年获利超 700 万，结局很刑！
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
周排行
rbac——界面、权限
Apache CXF + SpringMVC 整合发布WebService
so插件化
Vue.js实战系列---图标字体制作（svg格式）
PAT乙级 1007 素数对猜想(孪生素数对) (20分) ---（C语言 + 详细注释）
被IRM保护的文档，打开失败
Calendar和Date计算日期差的小问题
win10子系统ubuntu18.4安装docker
利用Wrap Shell Script定位Android Native内存泄漏
MySQL: Transaction (Part I - Basic Concept)
每日归档
更多
2024-05-03(19)
2024-05-02(0)
2024-05-01(4)
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022