代码：
%% ------------------------------------------------------------------------
%% Output Info about this m-file
fprintf('\n***********************************************************\n');
fprintf(' <DSP using MATLAB> Problem 8.18 \n\n');
banner();
%% ------------------------------------------------------------------------
Wp = 20*pi; Ws = 30*pi; Rp = 0.25; As = 50;
Fp = Wp/(2*pi);
Fs = Ws/(2*pi);
Ripple = 10 ^ (-Rp/20)
Attn = 10 ^ (-As/20)
% Analog filter design, DIRECT form:
[b, a] = afd('ellip', Fp, Fs, Rp, As);
%[b, a] = afd_elip(Wp, Ws, Rp, As);
% Calculation of second-order sections:
[C, B, A] = sdir2cas(b, a);
% Calculation of Frequency Response:
[db, mag, pha, ww] = freqs_m(b, a, 35*pi);
% Calculation of Impulse Response:
[ha, x, t] = impulse(b, a);
%% -------------------------------------------------
%% Plot
%% -------------------------------------------------
figure('NumberTitle', 'off', 'Name', 'Problem 8.18 Lowpass Analog Elliptic')
set(gcf,'Color','white');
M = 1.0; % Omega max
subplot(2,2,1); plot(ww/pi, mag); grid on; axis([-45, 45, 0, 1.2]);
xlabel(' Analog frequency in \pi*1k units'); ylabel('|H|'); title('Magnitude in Absolute');
set(gca, 'XTickMode', 'manual', 'XTick', [-30, -20, 0, 20, 30]);
set(gca, 'YTickMode', 'manual', 'YTick', [0, 0.003, 0.97, 1]);
subplot(2,2,2); plot(ww/pi, db); grid on; %axis([0, M, -50, 10]);
xlabel('Analog frequency in \pi*1k units'); ylabel('Decibels'); title('Magnitude in dB ');
set(gca, 'XTickMode', 'manual', 'XTick', [-30, -20, 0, 20, 30]);
set(gca, 'YTickMode', 'manual', 'YTick', [-70, -50, -1, 0]);
set(gca,'YTickLabelMode','manual','YTickLabel',['70';'50';' 1';' 0']);
subplot(2,2,3); plot(ww/pi, pha/pi); grid on; axis([-45, 45, -1.2, 1.2]);
xlabel('Analog frequency in \pi*1k nuits'); ylabel('radians'); title('Phase Response');
set(gca, 'XTickMode', 'manual', 'XTick', [-30, -20, 0, 20, 30]);
set(gca, 'YTickMode', 'manual', 'YTick', [-1:0.5:1]);
subplot(2,2,4); plot(t, ha); grid on; %axis([0, 30, -0.05, 0.25]);
xlabel('time in seconds'); ylabel('ha(t)'); title('Impulse Response');
运行结果：
绝对指标
模拟Elliptical低通，串联形式系数
幅度谱、相位谱和脉冲响应
通带放大
阻带放大
由图可知，通带、阻带，都是等波纹的。