ubuntu LVS+keepalived 笔记

编程语言 2019-06-13 23:42:10 阅读次数: 0

为什么80%的码农都做不了架构师？>>>   hot3.png

环境：

虚拟机系统：Ubuntu 12.04

hostname ip
LVSMaster eth0:192.168.31.198
eth1:10.10.100.100
LVSBackup eth0:192.168.31.197
eth1:10.10.100.101		 LVS 备机
RealserverNet1 eth0:10.10.100.53 真实机器 lvs net模式
RealserverNet2 eth0:10.10.100.54 真实机器 lvs net模式
RealserverDR1 eth0:192.168.31.186 真实机器 lvs dr模式

DR模式需要的VIP： 192.168.31.200
NET模式需要的VIP： 10.10.100.200

真实服务器配置

参照lvs 笔记

安装

LVSMaster和LVSBackup安装keepalived和lvs

apt-get install keepalived
apt-get install ipvsadm

lvs配置

LVSMaster配置文件

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {
   router_id LVSMaster
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0 # 对外服务的网卡
    virtual_router_id 100 #VRRP组名，两个节点的设置必须一样，以指明各个节点属于同一VRRP组
    priority 100 #主节点的优先级（1-254之间），备用节点必须比主节点优先级低
    advert_int 1 #设置主备之间同步检查的时间间隔单位秒 
    authentication { #设置验证信息，两个节点必须一致
        auth_type PASS
        auth_pass 123456   
    } 
    virtual_ipaddress { #指定虚拟IP, 两个节点设置必须一样
        192.168.31.200
    }
}

#lvs NAT配置
virtual_server 192.168.31.200 80 {
    delay_loop 6
    lb_algo wrr #设置负载高度算法，wrr带权循环
    lb_kind NAT #设置LVS实现负载均衡的机制，可以为{NAT|TUN|DR}三种
    #persistence_timeout 50 #会话保持时间，单位为秒。动态网页session共享简单的决解办法。测试的时候注掉，不然看不出效果
    protocol TCP  #指定转发协议类型可以设置{TCP|UDP}两种

    real_server 10.10.100.53 80 { #真实的主机
        weight 10 #真实的主机的权重,数字越大，权重越高 
        TCP_CHECK { #设置检测Realserver的方式
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }

    real_server 10.10.100.54 80 {
        weight 10
        TCP_CHECK {
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }

}

#lvs DR配置
virtual_server 192.168.31.200 80 {
    delay_loop 6
    lb_algo wrr
    lb_kind DR
    persistence_timeout 50
    protocol TCP

    real_server 192.168.31.186 80 {
        weight 1
        TCP_CHECK {
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }

}

LVSBackup配置文件

scp /etc/keepalived/keepalived.conf 10.10.100.101:/etc/keepalived/keepalived.conf
vim /etc/keepalived/keepalived.conf

只用修改
state BACKUP
priority 90

! Configuration File for keepalived

global_defs { router_id LVSMaster }

vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 100 priority 90 advert_int 1 authentication { auth_type PASS auth_pass 123456 } 
    virtual_ipaddress { 192.168.31.200 }
}

virtual_server 192.168.31.200 80 { delay_loop 6 lb_algo wrr lb_kind NAT #persistence_timeout 50 protocol TCP real_server 10.10.100.53 80 { weight 10 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80 }
    }

    real_server 10.10.100.54 80 { weight 10 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80 }
    }

}

virtual_server 192.168.31.200 80 { delay_loop 6 lb_algo wrr lb_kind DR persistence_timeout 50 protocol TCP real_server 192.168.31.186 80 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80 }
    }
}

启动

master 和backup 启动 keepalived

service keepalived start

测试

root@LVSMaster:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:2b:e9:71 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.198/24 brd 192.168.31.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 192.168.31.200/32 scope global eth0 #现在序列IP在LVSMaster上
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe2b:e971/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:2b:e9:7b brd ff:ff:ff:ff:ff:ff
    inet 10.10.100.100/24 brd 10.10.100.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe2b:e97b/64 scope link 
       valid_lft forever preferred_lft forever

访问 http://192.168.31.200/

模拟master出问题

root@LVSMaster:~# service keepalived stop
#vip已经没了
root@LVSMaster:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:2b:e9:71 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.198/24 brd 192.168.31.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe2b:e971/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:2b:e9:7b brd ff:ff:ff:ff:ff:ff
    inet 10.10.100.100/24 brd 10.10.100.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe2b:e97b/64 scope link 
       valid_lft forever preferred_lft forever

#vip在LVSBackup上
root@LVSBackup:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:7f:11:bd brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.197/24 brd 192.168.31.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 192.168.31.200/32 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe7f:11bd/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:7f:11:c7 brd ff:ff:ff:ff:ff:ff
    inet 10.10.100.101/24 brd 10.10.100.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe7f:11c7/64 scope link 
       valid_lft forever preferred_lft forever

转载于:https://my.oschina.net/neohlj/blog/624790

猜你喜欢

转载自blog.csdn.net/weixin_33697898/article/details/91835266
今日推荐
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
LFOSSA 源来如此公开课 | 掌握云原生未来：CNCF 认证全面攻略与备考秘籍
国产云输入法——仅华为无云端数据上传安全问题
周排行
Python环境安装与基础语法（1）——计算机基础知识
IMU预积分
ADAS中的LDW、FCW、BSD、LCA、ACC、AEB、APA、DMS代表的含义
B站笔试两道题
skyeye arm 硬件虚拟机环境的搭建
Web前端静态页面示例
数组-合并排序数组 II-简单
springcloud之版本问题启动报错
面向对象-------------匿名对象(六)
输入URL到页面呈现中间发生了什么？
每日归档
更多
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)
2024-04-23(26)
2024-04-22(39)
2024-04-21(0)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022