部署安装KVM

其他 2019-06-12 13:28:40 阅读次数: 0

CentOS版本:

[root@bogon ~]# cat /etc/centos-release
CentOS Linux release 7.3.1611 (Core)

安装KVM

  1. 先验证CPU是否支持KVM;如果结果中有vmx（Intel）或svm(AMD)字样，就说明CPU的支持的。运行后没有显示，那么你的处理器不支持硬件虚拟化.
    注意: 您可能需要在BIOS中启用虚拟化支持 
[root@bogon ~]# egrep '(vmx|svm)' /proc/cpuinfo
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc ape
rfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpri
ority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc ape
rfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpri
ority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc ape
rfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpri
ority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc ape
rfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpri
ority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
  1. 关闭SELinux，将 /etc/sysconfig/selinux 中的 SELinux=enforcing 修改为SELinux=disabled,并重启使设置生效
[root@bogon ~]# vim /etc/sysconfig/selinux
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled 
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

[root@localhost ~]# reboot

#重启之后
[root@localhost ~]# /usr/sbin/sestatus  ##SELinux status参数为disabled即为已关闭状态
SELinux status:                 disabled

[root@localhost ~]# getenforce   #selinux状态
Disabled
  1. 安装KVM及其依赖项
[root@bogon ~]# yum install -y qemu-kvm libvirt virt-install bridge-utils
  1. 验证安装结果
[root@localhost default]# lsmod|grep kvm
kvm_intel             170181  4 
kvm                   554609  1 kvm_intel
irqbypass              13503  1 kvm

提示:
有时lsmod查看并没有kvm_intel,如果输入以下命令:

[root@localhost ~]# modprobe  kvm_intel
could not insert 'kvm_intel': Operation not supported
[root@localhost ~]# dmesg |grep kvm
[    9.161622] kvm: disabled by bios
[    9.170352] kvm: disabled by bios
[1233191.671294] kvm: disabled by bios
[1233504.807593] kvm: disabled by bios
[1315137.732973] kvm: disabled by bios

很明了,BIOS里把 virtualization禁掉了.Enable之后，保存重启,重新加载即可.

  1. kvm设置其开机自动启动
#如果 Active: 不是active, 运行systemctl start libvirtd启动
[root@bogon ~]# systemctl status libvirtd
● libvirtd.service - Virtualization daemon
   Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled)
   Active: active (running) since 三 2018-08-22 18:19:57 CST; 2s ago
     Docs: man:libvirtd(8)
           https://libvirt.org
 Main PID: 23406 (libvirtd)
   Memory: 37.7M
   CGroup: /system.slice/libvirtd.service
           ├─23043 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --...
           ├─23044 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --...
           └─23406 /usr/sbin/libvirtd

8月 22 18:19:56 bogon systemd[1]: Starting Virtualization daemon...
8月 22 18:19:57 bogon systemd[1]: Started Virtualization daemon.
8月 22 18:19:57 bogon dnsmasq[23043]: read /etc/hosts - 3 addresses
8月 22 18:19:57 bogon dnsmasq[23043]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0 addresses
8月 22 18:19:57 bogon dnsmasq-dhcp[23043]: read /var/lib/libvirt/dnsmasq/default.hostsfile
8月 22 18:19:57 bogon libvirtd[23406]: 2018-08-22 10:19:57.143+0000: 23422: info : libvirt version:...org)
8月 22 18:19:57 bogon libvirtd[23406]: 2018-08-22 10:19:57.143+0000: 23422: info : hostname: bogon
8月 22 18:19:57 bogon libvirtd[23406]: 2018-08-22 10:19:57.143+0000: 23422: warning : virQEMUCapsIn...info
8月 22 18:19:57 bogon libvirtd[23406]: 2018-08-22 10:19:57.198+0000: 23422: warning : virLXCDriverC...info
Hint: Some lines were ellipsized, use -l to show in full.

#开机自动启动
[root@bogon ~]# systemctl is-enabled libvirtd
disabled
[root@bogon ~]# systemctl enable libvirtd
Created symlink from /etc/systemd/system/multi-user.target.wants/libvirtd.service to /usr/lib/systemd/system/libvirtd.service.
Created symlink from /etc/systemd/system/sockets.target.wants/virtlockd.socket to /usr/lib/systemd/system/virtlockd.socket.
Created symlink from /etc/systemd/system/sockets.target.wants/virtlogd.socket to /usr/lib/systemd/system/virtlogd.socket.
[root@bogon ~]# systemctl is-enabled libvirtd
enabled

安装虚拟机

  1. 安装镜像,可根据需要点击 centOS下载地址 下载自己所需要的版本
[root@bogon ~]# cd /tmp/
[root@bogon tmp]# curd -O http://mirror.lzu.edu.cn/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1804.iso
  1. 创建vm目录并创建虚拟机

[root@bogon ~]# mkdir –p /home/yx/kvm
[root@bogon ~]# cd /home/yx/
[root@bogon yx]# 
# -n, --name: 虚拟机名字
# -r, --ram: 内存大小,MB
# --vcpus: VCPU数目
#  --disk: 存储设备,format: 磁盘映像格式，如raw、qcow2、vmdk,
#  --os-type: 操作系统类型，如linux、unix或windows等
#  --network bridge=virbr0: 连接至virbr0的桥接设备
# -c,--cdrom /tmp/CentOS-7-x86_64-DVD-1804.iso: 光盘 (镜像文件)路径 
# --vnc --vncport=5901 --vnclisten=0.0.0.0: 使用vnc,监听vnc5902 图形安装界面
[root@bogon yx]# virt-install -n virt1 -r 2048 --vcpus=2  --disk kvm/virt1.img,format=qcow2,size=20 --os-type=linux --network bridge=virbr0   --cdrom /tmp/CentOS-7-x86_64-DVD-1804.iso --vnc --vncport=5902 --vnclisten=0.0.0.0
  1. 打开防火墙端口或关闭防火墙,
[root@bogon yx]# firewall-cmd --zone=public --add-port=5910/tcp --permanent
[root@bogon yx]# firewall-cmd –-reload

#或停止(关闭)firewalld
[root@bogon yx]# systemctl stop(disable) firewalld
  1. 使用VNC Viewer可virt-manager命令连接到虚拟机,进入CentOS安装,需要说明一下的是
    如果不设置用户,则默认是root,安装完毕之后,reboot重启
  1. 查看
#如果virt1的State不为running状态,运行virsh start virt1使之启动
[root@bogon yx]# virsh list --all
 Id    Name                           State
----------------------------------------------------
 8     virt1                          running

[root@bogon yx]# virsh console virt1
Connected to domain virt1
Escape character is ^]

CentOS Linux 7 (Core)
Kernel 3.10.0-862.el7.x86_64 on an x86_64

bogon login: root
Password: 
Last login: Mon Aug 20 21:54:52 from 10.67.12.86
[root@bogon ~]# 
[root@bogon ~]# cd /etc/sysconfig/network-scripts
[root@bogon network-scripts]# lltotal 228
-rw-r--r--. 1 root root   278 Aug 14 00:55 ifcfg-ens3
-rw-r--r--. 1 root root   254 Jan  2  2018 ifcfg-lo
lrwxrwxrwx. 1 root root    24 Aug 14 00:25 ifdown -> ../../../usr/sbin/ifdown
-rwxr-xr-x. 1 root root   654 Jan  2  2018 ifdown-bnep
-rwxr-xr-x. 1 root root  6569 Jan  2  2018 ifdown-eth
-rwxr-xr-x. 1 root root   781 Jan  2  2018 ifdown-ippp
-rwxr-xr-x. 1 root root  4540 Jan  2  2018 ifdown-ipv6
lrwxrwxrwx. 1 root root    11 Aug 14 00:25 ifdown-isdn -> ifdown-ippp
-rwxr-xr-x. 1 root root  2102 Jan  2  2018 ifdown-post
-rwxr-xr-x. 1 root root  1068 Jan  2  2018 ifdown-ppp
-rwxr-xr-x. 1 root root   870 Jan  2  2018 ifdown-routes
-rwxr-xr-x. 1 root root  1456 Jan  2  2018 ifdown-sit
-rwxr-xr-x. 1 root root  1621 Mar 17  2017 ifdown-Team
-rwxr-xr-x. 1 root root  1556 Mar 17  2017 ifdown-TeamPort
-rwxr-xr-x. 1 root root  1462 Jan  2  2018 ifdown-tunnel
lrwxrwxrwx. 1 root root    22 Aug 14 00:25 ifup -> ../../../usr/sbin/ifup
-rwxr-xr-x. 1 root root 12415 Jan  2  2018 ifup-aliases
-rwxr-xr-x. 1 root root   910 Jan  2  2018 ifup-bnep
-rwxr-xr-x. 1 root root 13442 Jan  2  2018 ifup-eth
-rwxr-xr-x. 1 root root 12075 Jan  2  2018 ifup-ippp
-rwxr-xr-x. 1 root root 11893 Jan  2  2018 ifup-ipv6
lrwxrwxrwx. 1 root root     9 Aug 14 00:25 ifup-isdn -> ifup-ippp
-rwxr-xr-x. 1 root root   650 Jan  2  2018 ifup-plip
-rwxr-xr-x. 1 root root  1064 Jan  2  2018 ifup-plusb
-rwxr-xr-x. 1 root root  4981 Jan  2  2018 ifup-post
-rwxr-xr-x. 1 root root  4154 Jan  2  2018 ifup-ppp
-rwxr-xr-x. 1 root root  2001 Jan  2  2018 ifup-routes
-rwxr-xr-x. 1 root root  3303 Jan  2  2018 ifup-sit
-rwxr-xr-x. 1 root root  1755 Mar 17  2017 ifup-Team
-rwxr-xr-x. 1 root root  1876 Mar 17  2017 ifup-TeamPort
-rwxr-xr-x. 1 root root  2711 Jan  2  2018 ifup-tunnel
-rwxr-xr-x. 1 root root  1836 Jan  2  2018 ifup-wireless
-rwxr-xr-x. 1 root root  5419 Jan  2  2018 init.ipv6-global
-rw-r--r--. 1 root root 19948 Jan  2  2018 network-functions
-rw-r--r--. 1 root root 31027 Jan  2  2018 network-functions-ipv6
[root@localhost network-scripts]#  vi ifcfg-ens3
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens3
UUID=f44eee6c-1a1e-4747-aae6-01d73c7e59a5
DEVICE=ens3
ONBOOT=no   #发现ONBOOT为no,更改为Yes,保存

[root@bogon network-scripts]# systemctl restart network
[root@bogon network-scripts]# ip addr  # 可以看到ip为10.67.12.103
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:9e:86:6b brd ff:ff:ff:ff:ff:ff
    inet 10.67.12.103/24 brd 10.67.12.255 scope global noprefixroute dynamic ens3
       valid_lft 67653sec preferred_lft 67653sec
    inet6 fe80::3e8c:4d64:ec26:c3f9/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

提示:
若 virsh console virt1执行卡住,则可以通过VNC Viewer或virt-manager 连接进入虚拟机 执行如下命令并重启即可

[root@localhost ~]# grubby --update-kernel=ALL --args="console=ttyS0"
[root@localhost ~]# reboot

虚拟机常用工具安装

[root@localhost ~]# yum install -y epel-release net-tools vim unzip zip wget ftp lrzsz dstat

java:

[root@localhost ~]# yum install –y java-1.8.0-open.jdk*

tomcat: 不建议yum安装,可自行去官方下载自己所需要的版本

[root@localhost ~]# cd /home/
[root@localhost home]# mkdir tomcat
[root@localhost home]# curl -O http://mirrors.shu.edu.cn/apache/tomcat/tomcat-8/v8.5.33/bin/apache-tomcat-8.5.33.tar.gz
[root@localhost home]# tar zxvf apache-tomcat-8.5.33.tar.gz -C tomcat/
[root@localhost home]# cd tomcat/apache-tomcat-8.5.33/
[root@localhost apache-tomcat-8.5.33]# ll
total 92
drwxr-x---. 2 root root  4096 Aug 20 22:53 bin
drwx------. 3 root root   254 Aug 20 22:39 conf
drwxr-x---. 2 root root  4096 Aug 20 06:44 lib
-rw-r-----. 1 root root 57092 Jun 20 15:53 LICENSE
drwxr-x---. 2 root root   197 Aug 20 22:39 logs
-rw-r-----. 1 root root  1723 Jun 20 15:53 NOTICE
-rw-r-----. 1 root root  7138 Jun 20 15:53 RELEASE-NOTES
-rw-r-----. 1 root root 16246 Jun 20 15:53 RUNNING.txt
drwxr-x---. 2 root root    30 Aug 20 06:44 temp
drwxr-x---. 3 root root    40 Aug 20 22:57 webapps
drwxr-x---. 3 root root    22 Aug 20 22:57 work
[root@localhost tomcat]# ./bin/startup.sh

提示
如果tomcat启动,访问不了,可以停止(关闭)防火墙或开放访问端口

monitorix: 轻量级监控

[root@localhost ~]# yum install -y  monitorix 
[root@localhost ~]# vim /etc/monitorix/monitorix.conf #修改访问端口
...
<httpd_builtin>
        enabled = y
        host =
        port = 1234  #修改为1234
        user = nobody
        group = nobody
        log_file = /var/log/monitorix-httpd
        hosts_deny =
        hosts_allow =
        <auth>
                enabled = n
                msg = Monitorix: Restricted access
                htpasswd = /var/lib/monitorix/htpasswd
        </auth>
</httpd_builtin>
...
[root@localhost ~]# systemctl start monitorix

接下来通过 http://10.67.12.103:1234/monitorix/ 访问监控页面

克隆

本地克隆

  1. 先关闭虚拟机
[root@localhost kvm]# virsh shutdown virt1
Domain virt1 is being shutdown

[root@localhost kvm]# virsh list --all
 Id    Name                           State
----------------------------------------------------
 -     virt1                          shut off
  1. virt-clone
# -o, --original:  源虚拟机
# -n ,--name: 新建虚拟机名字
# -f, --file: 指定新建的虚拟机磁盘文件
[root@localhost kvm]# virt-clone -o virt1 -n virt2 -f /home/yx/kvm/virt2.img
WARNING  Setting the graphics device port to autoport, in order to avoid conflicting.
Allocating 'virt2.img'                                                                                                                                                                                                    |  20 GB  00:00:20     

Clone 'virt2' created successfully
[root@localhost kvm]# virsh list --all
 Id    Name                           State
----------------------------------------------------
 -     virt1                          shut off
 -     virt2                          shut off
[root@localhost kvm]# virsh start virt2
Domain virt2 started

不同物理机之间的克隆

不同物理机之间的的虚拟机克隆,笔者主要采用virt-manager 图形界面进行.

1.拷贝虚拟机配置和文件

[root@localhost kvm]# scp /home/yx/kvm/virt1.img [email protected]:/home/yx/kvm/
[root@localhost kvm]# scp /etc/libvirt/qemu/virt1.xml [email protected]:/etc/libvirt/qemu/
[root@localhost kvm]#
  1. virt-manager
    进入图形界面
    File菜单点击Create a new virtual marchine 进入引导安装页面,选择Import existing disk image,
    根据提示操作即可.
    注意,Network selection选项需要根据实际情况选择,否则网络可能不连通.

附:KVM virsh常用命令

... ...
virsh start xxx 启动xxx的非活动虚拟机
virsh list --all 虚拟机列表
virsh create xxx.xml 创建虚拟.,创建后，虚拟机立即执行，成为活动主机
virsh suspend xxx 暂停虚拟机
virsh resume xxx 启动暂停的虚拟机
virsh shutdown xxx 关闭虚拟机
virsh destroy xxx 强制关闭虚拟机
virsh undefine xxx 删除虚拟机
virsh domiflist xxx 虚拟网卡
virsh dominfo xxx 显示虚拟机的基本信息
virsh domname 2 显示id号为2的虚拟机名
virsh domid xxx 显示虚拟机id号
virsh domuuid xxx 显示虚拟机的uuid
virsh domstate xxx 显示虚拟机的当前状态
virsh dumpxml xxx 显示虚拟机的当前配置文件
virsh console xxx 控制台登录xxx

作者：灵技阁
链接：https://www.jianshu.com/p/894d7c3c3eaf
来源：简书
简书著作权归作者所有，任何形式的转载都请联系作者获得授权并注明出处。

转载于:https://www.jianshu.com/p/8d5752ccd211

猜你喜欢

转载自blog.csdn.net/weixin_33806509/article/details/91207270
今日推荐
TIOBE 5 月榜单：Fortran “复活”进入 Top 10
GCC 14.1 发布
面壁智能发布 Eurux-8x22B 开源大模型 —— 堪称「理科状元」
开源日报 | 谷歌扶持鸿蒙上位；开源Rabbit R1；Docker加持的安卓手机；微软的焦虑和野心；海尔电器把开放平台关了
中国码农的“35岁魔咒”
蘭雅 CorelDRAW 插件 2024.5.1 国际劳动节版，免费下载
Arc Browser for Windows 1.0 正式 GA
90后程序员开发视频搬运软件、不到一年获利超 700 万，结局很刑！
周排行
Java自定义时间格式
同步整形电路
在开发中最最最常用的字符串的属性大集合
Linux 查看端口占用并杀掉
Java基础四：ArrayList
多线程之死锁就是这么简单
mysql 基础命令集
awk 命令详解
Centos6.3编译安装nginx+php步骤
OCR （Optical Character Recognition，光学字符识别）
每日归档
更多
2024-05-08(42)
2024-05-07(14)
2024-05-06(40)
2024-05-05(0)
2024-05-04(7)
2024-05-03(19)
2024-05-02(0)
2024-05-01(4)
2024-04-30(1)
2024-04-29(40)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022