【VMware】Centos network restart 提示 Device does not seem to be present

版权声明：本文为【丶我们一起学猫叫】原创文章，允许转载，但转载必须注明出处并附带首发链接！ https://blog.csdn.net/AV_woaijava/article/details/90004850

故障现象：

[root@c1node01 ~]# service network restart
Shutting down loopback insterface:                                                       [   OK  ]
Bringing up loopback insterface:                                                            [   OK  ]
Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED]

原因分析：

造成这样的原因，是因为在虚拟机（Vmware）中移动了Centos系统对应的文件，导致重新配置时，网卡的MAC地址变了，输入ifconfig -a,找不到eth0
我这里是因为当前虚拟机是克隆的另外一台虚拟机

安装完一个centos虚拟机，又拷贝一份，开机后网卡无法正常启动，报错：Device eth0 does not seem to be present,
delaying initialization

解决办法一：

[root@c1node01 ~]# rm -rf /etc/udev/rules.d/70-persistent-net.rules
[root@c1node01 ~]# reboot
[root@c1node01 ~]# service network restart
Shutting down loopback insterface:                                                         [   OK   ]
Bringing up loopback insterface:                                                              [   OK   ]
Bringing up interface eth0:                                                                     [   OK   ]

解决办法二

# mv /etc/sysconfig/network-scripts/ifcfg-eth0 sysconfig/network-scripts/ifcfg-eth1
# vim sysconfig/network-scripts/ifcfg-eth1

	修改 DEVICE="eth0" 为 DEVICE="eth1"

可删掉uuid、物理地址
然后重启启动网卡尝试下