H3C交换机远程端口镜像配置

版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/Francis_cxt/article/details/83120021

组网:

配置:

目的交换机:

<H3C> sys
System View: return to User View with Ctrl+Z.
[H3C] vlan 10
[H3C-vlan10] quit
[H3C] interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1] port link-type trunk
[H3C-GigabitEthernet1/0/1] port trunk permit vlan 10
[H3C-GigabitEthernet1/0/1] quit
[H3C] mirroring-group 1 remote-destination
[H3C] mirroring-group 1 monitor-port g1/0/2
[H3C] mirroring-group 1 remote-probe vlan 10
[H3C] dis mirroring-group remote-destination
Mirroring group 1:
Type: Remote destination
Status: Active
Monitor port: GigabitEthernet1/0/2
Remote probe VLAN: 10

[H3C]

中间交换机:

<H3C>
<H3C> sys
System View: return to User View with Ctrl+Z.
[H3C] vlan 10
[H3C-vlan10] quit
[H3C] int g1/0/1
[H3C-GigabitEthernet1/0/1] port link-type trunk
[H3C-GigabitEthernet1/0/1] port trunk permit vlan 10
[H3C-GigabitEthernet1/0/1] int g1/0/2
[H3C-GigabitEthernet1/0/2] port link-type trunk
[H3C-GigabitEthernet1/0/2] port trunk permit vlan 10
[H3C-GigabitEthernet1/0/2] quit
[H3C]

原交换机:

<H3C>
<H3C>%Aug 18 00:46:40:082 2018 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
<H3C>
<H3C> sys
System View: return to User View with Ctrl+Z.
[H3C] vlan 10
[H3C-vlan10] q
[H3C] int g1/0/1
[H3C-GigabitEthernet1/0/1] port link-type trunk
[H3C-GigabitEthernet1/0/1] port trunk permit vlan 10
[H3C-GigabitEthernet1/0/1] quit
[H3C] mirroring-group 1 remote-source
[H3C] mirroring-group 1 mirroring-port g1/0/2 ?
FortyGigE FortyGigE interface
GigabitEthernet GigabitEthernet interface
Ten-GigabitEthernet Ten-GigabitEthernet interface
both Monitor the inbound and outbound packets
inbound Monitor the inbound packets
outbound Monitor the outbound packets
to Range of interfaces

[H3C] mirroring-group 1 mirroring-port g1/0/2 outbound
[H3C] mirroring-group 1 reflector-port g1/0/5
This operation may delete all settings made on the interface. Continue? [Y/N]: y
[H3C] mirroring-group 1 remote-probe vlan 10
[H3C] dis mirroring-group remote-source
Mirroring group 1:
Type: Remote source
Status: Active
Mirroring port:
GigabitEthernet1/0/2 Outbound
Reflector port: GigabitEthernet1/0/5
Remote probe VLAN: 10

[H3C]

猜你喜欢

转载自blog.csdn.net/Francis_cxt/article/details/83120021