1、首先openwrt环境中编译gcom工具
2、参考网站
https://www.xuebuyuan.com/1046229.html
http://dev.archive.openwrt.org/ticket/18424
学习到如何通过gcom调用dongle /dev/ttyUSB1
方法如下:
3、发送短信脚本
cat /etc/gcom/sendmessage1
opengt
set com 115200n81
set comecho off
set senddelay 0.02
waitquiet 0.2 0.2
flash 0.1
:start
send "AT+CMGD=0,4^m"
get 1 "" $s
print $s
get 1 "" $s
print $s
send "AT+CMGF=1^m"
get 1 "" $s
print $s
send "AT+CMGW=\"10010\"^m"
send "CXLL^z^m^j"
get 1 "" $s
print $s
get 1 "" $s
print $s
send "AT+CMSS=0^m"
get 1 "" $s
print $s
get 1 "" $s
print $s
get 1 "" $s
print $s
:continue
exit 0
4、接收短信脚本
cat /etc/gcom/getmessage
opengt
set com 115200n81
set comecho off
set senddelay 0.02
waitquiet 0.2 0.2
flash 0.1
:start
send "AT+CMGF=1^m"
get 1 "" $s
print $s
send "AT+CMGR=0^m"
get 1 "" $s
print $s
send "AT+CMGR=1^m"
get 1 "" $s
print $s
send "AT+CMGR=2^m"
get 1 "" $s
print $s
:continue
5、调用方法
