1、创建vlan100,200
vlan database
vlan 1,100,200
vlan 100 in-band-mgmt
!
2、创建DBA带宽模版
gpon profile bandwidth 100M //DBA带宽模版
traffic-type internet maximum-bandwidth 1000000
!
3、创建 GPON Flow流量模版
gpon profile flow sfu //flow模版：单口ONU
add flow # sfu-1
sfu-1 encryption disable
sfu-1 flow-type pbmp 1-4
sfu-1 vlan 100 cos 0 service 100M
!
4、配置vlan转发模版
//未使用该vlan模版，由于ONU调用vlan模版时不支持trunk模式的vlan仅支持access vlan的模版引用
gpon profile vlan-translation vlan100
add translation access 100
!
5、OLT上行口配置default vlan100，方便调试，直连服务器
i
nterface giga-ethernet0/0 //OLT上行口设置access vlan100
switchport access vlan 100
no shutdown
!
interface gpon2/2
mac-address-table learning-mode move
onu add serial-number zxic33445566 //ONU 会自动发现和自动注册
onu zxic33445566 ethernet-profile auto-on uni-port 1-4 //OLT自动写入
//手动绑定flow 模版；flow 模版中通过vlan去绑定DBA模版
onu zxic33445566 flow-profile sfu
//手动绑定vlan转发模版并指定到ONU四个LAN口上
onu zxic33445566 vlan-translation-profile vlan100 uni-port 1-4
onu discovery-interval 30 //OLT自动写入
port-bridging //OLT自动写入
switchport mode trunk //设置PON端口类型
switchport trunk allowed vlan 100 //设置PON端口为允许trunk vlan100
no shutdown
6、设置带外管理IP地址
interface mgmt
ip address 192.168.1.1/24
no shutdown
!
interface mgmt1
!
7、设置带内管理vlan对应的IP地址
interface mgmt1.100 //管理vlan100设置IP地址
description internet_vlan+management_vlan
ip address 10.10.20.100/24
no shutdown
!
1.如何创建管理vlan？？？
创建vlan database —>创建vlan100----> vlan 100 in-band-mgmt
# con t
(config)# vlan database
(config-vlan)# vlan 100
(config-vlan)# vlan 100 in-band-mgmt