MTK MT6763 FAQ资料集锦

版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/szx940213/article/details/82589254

MT6763 FAQ资料：

1、MT6763 eFUSE programming specification

VQPS : Typical 1.8V+/-5%
Program time : 6us (+/-5%)
Current consumption : ~200mA. 
Vout ramp up time: 30us<t @ Vout =0V to VeFUSE

2、MT6763电池OC规范

MT6763电池选择OC规格>=5.5A(10 Ms)

3、MT6763 Fuel gauge Schematics/layout notice

1）Sense resistor Rfg should be 10m Ω 1% ,0.5W↑(depend on system max power consumption 7A-> 0.5W, 10A -> 1W) package in series with the battery negative terminal to ground 
System max power consumption < 10A, Rfg is 10mΩ
System max power consumption > 10A, Rfg is 5mΩ
2）Rfg should be placed near battery connector in PCB layout.
3）FGP_IC/FGN_IC should be 4mil differential traces from chip CS_N/CS_P to Rfg

4、ISINK resource

Isink integrated into theMT6370 in the MT6763 platform

5、如果不使用MT6370，I2C_APPM可以用于其他设备吗？如果是的话，有什么需要特别注意的吗？

I2C_APPM与其他I2C IO的设计相同；

只需使用其他设备，而MT 6370则不使用