不同的版本的Linux系统，挂再硬盘的方法是不同的。如果使用传统的硬盘挂再命令不能解决出现的“NTFS”“FAT32”
不支持此类的问题时，需要查看自己的linux内核下的ntfs活fat32是否与linux系统的版本相符后是否安装。 CentOS4.3下的硬盘
挂再方法如下所示：
1.首先通过 rpm -qa |grep ntfs来查看是否安装了ntfs内核，如果已经安装，则会显示出起版本信息，否则显示未安装
2.如果ntfs和linux内核不匹配，则需要下载最新版本的ntfs补丁来修复，并安装，具体方法如下：
[root@localhost ~]# yum install ntfs-3g
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package fuse-ntfs-3g.i386 0:2009.4.4-2.el5.rf set to be updated
--> Processing Dependency: fuse >= 2.6.3 for package: fuse-ntfs-3g
--> Running transaction check
---> Package fuse.i386 0:2.7.4-8.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
fuse-ntfs-3g i386 2009.4.4-2.el5.rf Dag 385 k
Installing for dependencies:
fuse i386 2.7.4-8.el5 163-com-base 83 k
Transaction Summary
================================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 468 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): fuse-2.7.4-8.el5.i386.rpm | 83 kB 00:00
(2/2): fuse-ntfs-3g-2009.4.4-2.el5.rf.i386.rpm | 385 kB 00:14
--------------------------------------------------------------------------------
Total 22 kB/s | 468 kB 00:21
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : fuse 1/2
Installing : fuse-ntfs-3g 2/2
Installed:
fuse-ntfs-3g.i386 0:2009.4.4-2.el5.rf
Dependency Installed:
fuse.i386 0:2.7.4-8.el5
Complete!
3.通过fsdisk -l来查看要挂载的硬盘的详细信息
[root@localhost ~]# fdisk -l
Disk /dev/sda: 158.7 GB, 158717154816 bytes
255 heads, 63 sectors/track, 19296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 2612 20980858+ 7 HPFS/NTFS
/dev/sda2 2613 19295 134006197+ f W95 Ext'd (LBA)
/dev/sda5 2613 7839 41985846 7 HPFS/NTFS
/dev/sda6 7840 13066 41985846 7 HPFS/NTFS
/dev/sda7 13067 18021 39801006 b W95 FAT32
/dev/sda8 18022 18046 200781 b W95 FAT32
/dev/sda9 18047 19165 8988336 83 Linux
/dev/sda10 19166 19295 1044193+ 82 Linux swap / Solaris
4.通过mkdir /mnt/xx 来创建相应的挂载点，即将所挂载的硬盘查看的地方
[root@localhost ~]# mkdir /mnt/myhdc5
并使用mount -t ntfs-3g /dev/sdax /mnt/E来挂载相应的硬盘
[root@localhost ~]# mount -t ntfs-3g /dev/sda5 /mnt/E
[root@localhost ~]#