【Qt】QOpenGLWidget展示蒙版效果

关键代码是派生QOpenGLWidget，覆写paintEvent函数

QPainter p;
    p.begin(this);
    p.drawImage(QPoint(0, 0), m_Img);

    QLinearGradient grad(0, 0, rect().width(), rect().height());
           {
                   QGradientStops gs;
                   gs << QGradientStop(0.0, QColor(0,0,0,100))
                           << QGradientStop(0.5, QColor(0,0,0,100))
                           << QGradientStop(1.0, QColor(0,0,0,100));
                   grad.setStops(gs);
           }

    //定义顶部蒙版高度
     int m_topHeight = 20;
     //定义双侧蒙版宽度
     int m_sideWidth = 50;
     //定义底部蒙版高度
     int m_bottomHeight = 100;
     //线条长度
     int iLineLen = 20;

     //底部文字框的宽高
     int iTxtHeight = 50;
     int iTxtWidth = 150;

   //填充周围蒙版
   //顶部
   p.fillRect(0, 0, rect().width(), m_topHeight, grad);
   //底部
   p.fillRect(0, rect().height() - m_bottomHeight, rect().width(), m_bottomHeight, grad);

   //左侧
   p.fillRect(0, m_topHeight, m_sideWidth, rect().height() - m_topHeight - m_bottomHeight, grad);

   //右侧
   p.fillRect(rect().width() - m_sideWidth,  m_topHeight, m_sideWidth, rect().height() - m_topHeight - m_bottomHeight, grad);

   QPen pen;
   pen.setStyle(Qt::DashDotLine);
    pen.setWidth(1);

    if(m_status == 0)
    {
        pen.setBrush(Qt::green);
    }
    else if(m_status == 1)
    {
        pen.setBrush(Qt::yellow);
    }
    else if(m_status == 2)
    {
        pen.setBrush(Qt::red);
    }

    pen.setCapStyle(Qt::RoundCap);
    pen.setJoinStyle(Qt::RoundJoin);

    p.setPen(pen);
    //绘制中间高亮区域矩形
    //矩形宽高
    int iWith =rect().width()-m_sideWidth*2;
    int iHeight = rect().height() -m_topHeight - m_bottomHeight;

    p.drawRect(m_sideWidth, m_topHeight, iWith,iHeight);

    QPen pen2;
    pen2.setWidth(5);

    if(m_status == 0)
    {
        pen2.setBrush(Qt::green);
    }
    else if(m_status == 1)
    {
        pen2.setBrush(Qt::yellow);
    }
    else if(m_status == 2)
    {
        pen2.setBrush(Qt::red);
    }

    p.setPen(pen2);
    //画四角的线条

    //左上横线
    p.drawLine(m_sideWidth,m_topHeight,m_sideWidth +iLineLen, m_topHeight);
    //左上竖线
    p.drawLine(m_sideWidth,m_topHeight+iLineLen,m_sideWidth,m_topHeight);

    //右上横线
    p.drawLine(rect().width() - m_sideWidth - iLineLen,m_topHeight, rect().width() - m_sideWidth,m_topHeight);

    //右上竖线
    p.drawLine(rect().width() - m_sideWidth,m_topHeight, rect().width() - m_sideWidth, m_topHeight + iLineLen);

    //右下竖线
    p.drawLine(rect().width() - m_sideWidth,rect().height()-m_bottomHeight,rect().width() - m_sideWidth,rect().height()-m_bottomHeight - iLineLen);
    //右下横线
    p.drawLine(rect().width() - m_sideWidth,rect().height()-m_bottomHeight, rect().width() - m_sideWidth - iLineLen,rect().height()-m_bottomHeight);

    //左下横线
    p.drawLine(m_sideWidth,rect().height()-m_bottomHeight,m_sideWidth+iLineLen, rect().height()-m_bottomHeight);
    //左下竖线
    p.drawLine(m_sideWidth,rect().height()-m_bottomHeight, m_sideWidth,rect().height()-m_bottomHeight -iLineLen);


    //绘制底部提示消息
    QString strMsg = "";
    if(m_status == 0)
    {
        strMsg=QStringLiteral("请通行");
    }
    else if(m_status == 1)
    {
        strMsg=QStringLiteral("请刷脸");
    }
    else if(m_status == 2)
    {
        strMsg=QStringLiteral("请对准红框");
    }
    p.setPen(pen);
    p.drawRect(rect().width()/2 - iTxtWidth/2, rect().height()-m_bottomHeight + (m_bottomHeight/2-iTxtHeight/2), iTxtWidth, iTxtHeight );


    QRect txtRect;
    txtRect.setX(rect().width()/2 - iTxtWidth/2);
    txtRect.setY(rect().height()-m_bottomHeight + (m_bottomHeight/2-iTxtHeight/2));
    txtRect.setWidth(iTxtWidth);
    txtRect.setHeight(iTxtHeight);

    p.setPen(pen2);

    QFont font;
    font.setFamily("Microsoft YaHei");
    // 大小
    font.setPointSize(20);
    // 使用字体
    p.setFont(font);

    p.drawText(txtRect, Qt::AlignCenter , strMsg);

    p.end();

使用QMoive播放Gif的代码

 m_movie =new QMovie("F:/TestProject/QMoveTest/timg.gif");
    m_timer =new QTimer(this);

 ui->lblMove->setVisible(true);

        ui->lblMove->setMovie(m_movie);

        m_movie->start();

        //m_timer->start(3000);
        QTimer::singleShot(5000, this, SLOT(StopMovie()));

void MainWindow::StopMovie()
{
    m_movie->stop();
    ui->lblMove->setVisible(false);
}

最终效果:

+

扫描二维码关注公众号，回复： 2776366 查看本文章