1. 概述... 5

1.1. 目的... 5

1.2. 环境说明... 5

2. MySQL互为主从配置... 5

2.1. 双机hosts文件配置... 5

2.2. 主备机NTP时钟同步... 5

2.3. 双机互信配置... 5

2.4. 数据库配置... 7

2.4.1. 配置文件修改... 7

2.4.2. 创建复制账号并同步... 9

2.4.3. 配置密文命令访问... 9

2.5. 切换脚本... 10

2.5.1. 环境文件... 10

2.5.2. 检查脚本... 10

2.5.3. 切换脚本... 11

2.5.4. 回切脚本... 13

2.5.5. 停止脚本... 14

3. Keepalived配置... 15

3.1. 切换原理... 15

3.2. Keepalived的安装... 16

3.3. Keepalived的配置... 17

3.3.1. Master端配置... 17

3.3.2. Slave端配置... 18

3.4. 修改默认输出日志位置... 19

3.5. Keepalived启动和停止... 20

4. 切换验证... 20

4.1. 停止主端... 20

4.2. 检查状态... 20

4.3. 启动主端... 25

4.4. 回切验证... 26

5. 其它... 26

5.1. 日志的检查... 27

概述

1.1. 目的

为解决Mysql数据库单点问题，实现两台MySQL数据库互为主备，双向replication。当一Master出现问题，则将Slave切换为Master继续工作。

1.2. 环境说明

序号	服务器IP	用途	备注
1	10.50.15.100	主机A	Master
2	10.50.15.101	主机B	Slave
3	10.50.15.99	VIP

2. MySQL互为主从配置

2.1. 双机hosts文件配置

双机hosts文件配置，需要在两台主机上分别修改/etc/hosts文件，如下所示：

10.50.15.100 MYSQL-APP-T01

10.50.15.101 MYSQL-APP-T02

2.2. 主备机NTP时钟同步

生产环境要求主备机，必须进行时钟同步。

2.3. 双机互信配置

1、在Master主机上创建信任认证文件，如下

[root@MYSQL-APP-T01 logs]# ssh-keygen -t rsa

Generating public/private rsa key pair.

Enter file in which to save the key (/root/.ssh/id_rsa):

Enter passphrase (empty for no passphrase):

Enter same passphrase again:

Your identification has been saved in /root/.ssh/id_rsa.

Your public key has been saved in /root/.ssh/id_rsa.pub.

The key fingerprint is:

df:f7:66:83:ae:c1:af:ef:84:ef:b0:ff:55:d8:d9:ec root@MYSQL-APP-T01

The key's randomart image is:

+--[ RSA 2048]----+

| |

| +o|

| S ..=|

| .... ..|

| .=..o E|

| Bo o+|

| +OO.+o|

+-----------------+

2、执行完成后，在/root/.ssh目录下生成如下文件

[root@MYSQL-APP-T01 .ssh]# ls -rtl

总用量 16

-rw-r--r-- 1 root root 394 7月 27 13:36 known_hosts

-rw-r--r-- 1 root root 400 7月 28 14:31 id_rsa.pub

-rw------- 1 root root 1675 7月 28 14:31 id_rsa

3、在Slave主机上创建信任认证文件，如下

[root@MYSQL-APP-T02 logs]# ssh-keygen -t rsa

Generating public/private rsa key pair.

Enter file in which to save the key (/root/.ssh/id_rsa):

Enter passphrase (empty for no passphrase):

Enter same passphrase again:

Your identification has been saved in /root/.ssh/id_rsa.

Your public key has been saved in /root/.ssh/id_rsa.pub.

The key fingerprint is:

f5:ea:db:aa:64:06:59:8f:de:13:5f:53:a5:5f:e9:46 root@MYSQL-APP-T02

The key's randomart image is:

+--[ RSA 2048]----+

| .|

| .o|

| . . .Eo|

| o + . oo.|

| o S o . oo.|

| o . + ... |

| = + . |

| + . o |

| ..+o. |

+-----------------+

4、执行完成后，同样也会在/root/.ssh目录下生成相同的文件。

5、拷贝Master主机上的id_rsa.pub文件，到Slave主机的/root/.ssh/目录下，并重名为authorized_keys文件。

cd /root/.ssh

scp -r id_rsa.pub 10.50.15.101:/root/.ssh/authorized_keys

6、拷贝Slave主机上的id_rsa.pub文件，到Master主机的/root/.ssh/目录下，并重名为authorized_keys文件

cd /root/.ssh

scp -r id_rsa.pub 10.50.15.100:/root/.ssh/authorized_keys

7、使用scp命令随便传个文件进行测试验证，不需要输入密码即为配置正确。

2.4. 数据库配置

2.4.1. 配置文件修改

1、修改Master主机上MySQL数据库的配置文件，然后新启动MySQL

[client]

port = 3306

socket = /mydata/data/mysql.sock

[mysql]

no-auto-rehash

[mysqld]

log-bin=mysql-bin

server-id=100

expire_logs_days = 10

socket = /mydata/data/mysql.sock

basedir = /mysql

datadir = /mydata/data

max_allowed_packet = 32M

explicit_defaults_for_timestamp = true

skip-ssl

secure-file-priv = NULL

lower_case_table_names = 1

back_log = 300

max_connections = 3000

max_connect_errors = 100

table_open_cache = 4096

external-locking = FALSE

sort_buffer_size = 16M

join_buffer_size = 16M

thread_cache_size = 16

query_cache_size = 128M

query_cache_limit = 4M

ft_min_word_len = 8

thread_stack = 512k

transaction_isolation = REPEATABLE-READ

tmp_table_size = 128M

max_heap_table_size = 128M

long_query_time = 6

slow_query_log

slow_query_log_file = /mydata/log/slow.log

[mysqldump]

quick

max_allowed_packet = 32M

[mysqld_safe]

open-files-limit = 8192

log-error = /mydata/log/mysql_3306.err

注：主要修改标黄底红字部分，其余部分为标准参数，请参考。

2、修改Slave主机上MySQL数据库的配置文件，然后新启动MySQL。

[mysqld]

log-bin=mysql-bin

server-id=101

expire_logs_days = 10

3、 Master主机上和Slave主机上server-id不能一致，本文解取的IP地址最后一段。

4、查询相关状态，以Master主机为例，如下

mysql> show variables like '%server_id%';

+----------------+-------+

| Variable_name | Value |

+----------------+-------+

| server_id | 100 |

| server_id_bits | 32 |

+----------------+-------+

2 rows in set (0.00 sec)

mysql> show master status;

+------------------+----------+--------------+------------------+-------------------+

+------------------+----------+--------------+------------------+-------------------+

| mysql-bin.000001 | 154 | | | |

+------------------+----------+--------------+------------------+-------------------+

1 row in set (0.00 sec)

2.4.2. 创建复制账号并同步

1、在Master库和Slave库分别执行，创建数据同步复制账号

mysql> GRANT REPLICATION SLAVE,REPLICATION CLIENT ON *.* TO replication@'%' IDENTIFIED BY 'replication';

2、在Slave主机上，执行同步操作（注意master_host参数主备机相互指向），如下：

mysql> change master to master_host='10.50.15.100',master_port=3306,master_user='replication',master_password='replication',master_log_file='mysql-bin.000001',master_log_pos=154;

注：参数据说明：

1） master_host 要从哪个Master主机同步数据；

2） master_port 数据库默认的连接端口

3） master_user 数据同步复制的用户

4） master_password 数据同步复制的用户密码

5） master_log_file 主数据库show master status中File的值。

6） master_log_pos 主数据库show master status中Position的值。

3、在Slave主机上，查询同步状态“show slave status\G”，检查结果中Slave_IO_Running: Yes和Slave_SQL_Running: Yes，否则有异常。

2.4.3. 配置密文命令访问

Mysql数据库使用mysql或mysqldump等相关命令时，需要在命令行界面输入密码，当使用脚本时，在脚本里填写密码显然不太安全，因此可以设置Mysql的密文文件。

# mysql_config_editor set --login-path=local --host=localhost --user=root –password

# mysql_config_editor print --all

使用时用参数--login-path=local即可。

2.5. 切换脚本

切换脚本规划，将所有切换脚本放在/home/sysadmin/switch目录下，如本次是mysql切换，因此在该目录下创建mysql目录。本次相关脚本说明如下：

进入/home/sysadmin/switch/mysql目录，如下文件：

Logs //存储日志的文件目录

mybackup.sh //清空slave配置，重新获取远程日志文件及Pos,并开启同步

mycheck.sh //检查mysql运行状态，如果运行正常，退出。如果运行不正常调用pkill keepalived

mymaster.sh //先判断同步复制是否执行完成，如果未执行完成等待1分钟后，停止同步（stop slave;），并且记录切换后的日志和pos

.mysqlenv //脚本运行环境文件

mystop.sh //设置参数保证数据不丢失，最后检查看是否还有写操作，最后1分钟退出

syncposfile //每次切换后，Master最后一次File值和Position值。

2.5.1. 环境文件

1、 Master主机端的环境文件

MYSQL=/mysql/bin/mysql

MYSQL_CMD="--login-path=local"

#远端主机的IP地址

REMOTE_IP=10.50.15.101

export mysql="$MYSQL $MYSQL_CMD "

2、 Slave主机端的环境文件

MYSQL=/mysql/bin/mysql

MYSQL_CMD="--login-path=local"

#远端主机的IP地址

REMOTE_IP=10.50.15.100

export mysql="$MYSQL $MYSQL_CMD "

2.5.2. 检查脚本

#!/bin/sh

##################################################

#File Name : mycheck.sh

#Date : 2017-07-28

#Description: mysql is working MYSQL_OK is 1

# mysql is down MYSQL_OK is 0

#Writer ：by gengjianqiu

##################################################

BASEPATH=/home/sysadmin/switch/mysql

LOGSPATH=$BASEPATH/logs

source $BASEPATH/.mysqlenv

CHECK_TIME=3

MYSQL_OK=1

function check_mysql_helth(){

$mysql -e "show status;" >/dev/null 2>&1

if [ $? = 0 ] ;then

MYSQL_OK=1

else

MYSQL_OK=0

return $MYSQL_OK

}

while [ $CHECK_TIME -ne 0 ]

let "CHECK_TIME -= 1"

check_mysql_helth

if [ $MYSQL_OK = 1 ] ; then

CHECK_TIME=0

echo "$(date "+%Y-%m-%d %H:%M:%S") The mycheck.sh, mysql is running..." >> $LOGSPATH/mysql_switch.log

exit 0

if [ $MYSQL_OK -eq 0 ] && [ $CHECK_TIME -eq 0 ];then

echo "$(date "+%Y-%m-%d %H:%M:%S") The mycheck.sh, mysql is down, after switch..." >> $LOGSPATH/mysql_switch.log

pkill keepalived

exit 1

sleep 1

done

2.5.3. 切换脚本

#!/bin/sh

##################################################

#File Name : mymaster.sh

#Date : 2017-07-28

#Description: First determine whether synchronous

# replication is performed, and if no

# execution is completed, wait for 1

# minutes. Log logs and POS after

# switching, and record files synchronously.

#Writer ：by gengjianqiu

##################################################

BASEPATH=/home/sysadmin/switch/mysql

LOGSPATH=$BASEPATH/logs

source $BASEPATH/.mysqlenv

$mysql -e "show slave status\G" > $LOGSPATH/mysqlslave.states

Master_Log_File=`cat $LOGSPATH/mysqlslave.states | grep -w Master_Log_File | awk -F": " '{print $2}'`

Relay_Master_Log_File=`cat $LOGSPATH/mysqlslave.states | grep -w Relay_Master_Log_File | awk -F": " '{print $2}'`

Read_Master_Log_Pos=`cat $LOGSPATH/mysqlslave.states | grep -w Read_Master_Log_Pos | awk -F": " '{print $2}'`

Exec_Master_Log_Pos=`cat $LOGSPATH/mysqlslave.states | grep -w Exec_Master_Log_Pos | awk -F": " '{print $2}'`

i=1

while true

if [ $Master_Log_File = $Relay_Master_Log_File ] && [ $Read_Master_Log_Pos -eq $Exec_Master_Log_Pos ];then

echo "$(date "+%Y-%m-%d %H:%M:%S") The mymaster.sh, slave sync ok... " >> $LOGSPATH/mysql_switch.log

break

else

sleep 1

if [ $i -gt 60 ];then

break

continue

let i++

done

$mysql -e "stop slave;"

$mysql -e "set global innodb_support_xa=0;"

$mysql -e "set global sync_binlog=0;"

$mysql -e "set global innodb_flush_log_at_trx_commit=0;"

$mysql -e "flush logs;GRANT ALL PRIVILEGES ON *.* TO 'replication'@'%' IDENTIFIED BY 'replication';flush privileges;"

$mysql -e "show master status;" > $LOGSPATH/master_status_$(date "+%y%m%d-%H%M").txt

# sync pos file

/usr/bin/scp $LOGSPATH/master_status_$(date "+%y%m%d-%H%M").txt root@$REMOTE_IP:$BASEPATH/syncposfile/backup_master.status

echo "$(date "+%Y-%m-%d %H:%M:%S") The mymaster.sh, Sync pos file sucess." >> $LOGSPATH/mysql_switch.log

2.5.4. 回切脚本

#!/bin/sh

##################################################

#File Name : mybackup.sh

#Date : 2017-07-28

#Description: Empty the slave configuration, retrieve

# the remote log file and Pos, and open

# the synchronization

#Writer ：by gengjianqiu

##################################################

BASEPATH=/home/sysadmin/switch/mysql

LOGSPATH=$BASEPATH/logs

source $BASEPATH/.mysqlenv

$mysql -e "GRANT ALL PRIVILEGES ON *.* TO 'replication'@'%' IDENTIFIED BY 'replication';flush privileges;"

$mysql -e "set global innodb_support_xa=0;"

$mysql -e "set global sync_binlog=0;"

$mysql -e "set global innodb_flush_log_at_trx_commit=0;"

$mysql -e "flush logs;"

$mysql -e "reset slave all;"

if [ -f $BASEPATH/syncposfile/backup_master.status ];then

New_ReM_File=`cat $BASEPATH/syncposfile/backup_master.status | grep -v File |awk '{print $1}'`

New_ReM_Position=`cat $BASEPATH/syncposfile/backup_master.status | grep -v File |awk '{print $2}'`

echo "$(date "+%Y-%m-%d %H:%M:%S") This mybackup.sh, New_ReM_File:$New_ReM_File,New_ReM_Position:$New_ReM_Position" >> $LOGSPATH/mysql_switch.log

$mysql -e "change master to master_host='$REMOTE_IP',master_port=3306,master_user='replication',master_password='replication',master_log_file='$New_ReM_File',master_log_pos=$New_ReM_Position;"

$mysql -e "start slave;"

$mysql -e "show slave status\G;" > $LOGSPATH/slave_status_$(date "+%y%m%d-%H%M").txt

cat $LOGSPATH/slave_status_$(date "+%y%m%d-%H%M").txt >> $LOGSPATH/mysql_switch.log

rm -f $BASEPATH/syncposfile/backup_master.status

else

echo "$(date "+%Y-%m-%d %H:%M:%S") The scripts mybackup.sh running error..." > $LOGSPATH/mysql_switch.log

2.5.5. 停止脚本

#!/bin/sh

##################################################

#File Name : mystop.sh

#Date : 2017-07-28

#Description: Set parameters to ensure that the data

# is not lost, and finally check to see

# if there are still write operations,

# the last 1 minutes to exit

#Writer ：by gengjianqiu

##################################################

BASEPATH=/home/sysadmin/switch/mysql

LOGSPATH=$BASEPATH/logs

source $BASEPATH/.mysqlenv

$mysql -e "GRANT ALL PRIVILEGES ON *.* TO 'replication'@'%' IDENTIFIED BY 'replication';flush privileges;"

$mysql -e "set global innodb_support_xa=1;"

$mysql -e "set global sync_binlog=1;"

$mysql -e "set global innodb_flush_log_at_trx_commit=1;"

$mysql -e "show master status\G" > $LOGSPATH/mysqlmaster0.states

M_File1=`cat $LOGSPATH/mysqlmaster0.states | awk -F': ' '/File/{print $2}'`

M_Position1=`cat $LOGSPATH/mysqlmaster0.states | awk -F': ' '/Position/{print $2}'`

sleep 2

$mysql -e "show master status\G" > $LOGSPATH/mysqlmaster1.states

M_File2=`cat $LOGSPATH/mysqlmaster1.states | awk -F': ' '/File/{print $2}'`

M_Position2=`cat $LOGSPATH/mysqlmaster1.states | awk -F': ' '/Position/{print $2}'`

i=1

while true

if [ $M_File1 = $M_File2 ] && [ $M_Position1 -eq $M_Position2 ];then

echo "$(date "+%Y-%m-%d %H:%M:%S") The mystop.sh, master sync ok..." >> $LOGSPATH/mysql_switch.log

exit 0

else

sleep 1

if [ $i -gt 60 ];then

break

continue

let i++

done

echo "$(date "+%Y-%m-%d %H:%M:%S") The mystop.sh, master sync exceed one minutes..." >> $LOGSPATH/mysql_switch.log

Keepalived配置

3.1. 切换原理

Keepalived可实现将虚拟IP地址在实体物理机上来回漂移。Keepalived在转换状态时会依照状态来呼叫配置文件中内置的定义。

当进入Master状态时会呼叫notify_master定义的脚本

当进入Backup状态时会呼叫notify_backup定义的脚本

当keepalived程序终止时呼叫notify_stop定义的脚本

当发现异常情况时进入Fault状态呼叫notify_fault定义的脚本

切换的过程如下：

1）在Master主机上keepalived运行时执行mycheck.sh脚本不停的检查mysql的运行状态，当发现mysql停止后将keepalived进程杀掉。

2）此时Slave主机上会接管虚拟IP地址，并调用notify_master定义的脚本

3）当原Master主机上的mysql和keepalived进程恢复正常后，会调用notify_backup定义的脚本，此时数据库的主端还在Savle主机上。

4）回切，关闭Slave端的keepavlied进程，会调用notify_stop脚本，同时Master主机上会调用notify_master定义的脚本。此时数据库的主端在Master主机上

5）启动Slave端的keepavlied进程，会调用notify_backup脚本，此时完成数据同步。

3.2. Keepalived的安装

1、下载安装包http://www.keepalived.org/download.html

2、本文下载的为keepalived-1.3.5版本，并放在了/media目录下。需要安装依赖包如下

# yum install –y libnl libnl-devel libnl3 libnl3-cli libnl3-devel libnfnetlink libnfnetlink-devel

注：默认redhat6.8光盘中没有libnfnetlink-devel包，已从网上找到相关依赖包，我进行了打包keepalived_yilaibao.tar，需要可以联系我。

3、编译keepalived安装包文件，并执行安装

# cd /media

# tar -zxvf keepalived-1.3.5.tar.gz

# cd keepalived-1.3.5

# ./configure --prefix=/usr/local/keepalived //指定安装路径，默认为/usr/local/sbin

# 编译完成后，最后显示如下信息

Keepalived configuration

------------------------

Keepalived version : 1.3.5

Compiler : gcc

Compiler flags : -g -O2 -DFALLBACK_LIBNL1

Extra Lib : -lssl -lcrypto -lcrypt -lnl

Use IPVS Framework : Yes

IPVS sync daemon support : Yes

IPVS use libnl : Yes

fwmark socket support : Yes

Use VRRP Framework : Yes

Use VRRP VMAC : Yes

SNMP support : No

SHA1 support : No

Use Debug flags : No

# make && make install

4、将keepalived添加到服务中，并且设置为自动启动，如下

# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

# mkdir -p /etc/keepalived

# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/

# cp /media/keepalived-1.3.5/keepalived/etc/init.d/keepalived /etc/rc.d/init.d/

# cd /etc/rc.d/init.d/

# chkconfig --add keepalived

# chkconfig --level 345 keepalived on

3.3. Keepalived的配置

在Master端和Savle端均安装好keepalived后，进行配置，修改/etc/keepalived/keepalived.conf文件。

3.3.1. Master端配置

! Configuration File for keepalived

global_defs {

router_id KeepAlive_Mysql #标识，主从一致

}

vrrp_script check_run {

script "/home/sysadmin/switch/mysql/mycheck.sh" #Mysql状态检查脚本

interval 10

}

vrrp_sync_group VG1 {

group {

VI_1

}

vrrp_instance VI_1 {

    state BACKUP   # 注意，主从两端都配置成了backup，因为使用了nopreempt，即非抢占模式

interface eth0

virtual_router_id 51 #分组，主从相同

priority 100 # 优先级，这个高一点则先把它作为master

advert_int 1

nopreempt #不主动抢占资源，设置非抢占模式

authentication { #主从一致

auth_type PASS

auth_pass 1234.com

}

track_script {

check_run

}

notify_master /home/sysadmin/switch/mysql/mymaster.sh

notify_backup /home/sysadmin/switch/mysql/mybackup.sh

notify_stop /home/sysadmin/switch/mysql/mystop.sh

virtual_ipaddress {

10.50.15.99/24 brd 10.50.15.255 dev eth0 label eth0:0 # 虚拟IP地址

}

3.3.2. Slave端配置

! Configuration File for keepalived

global_defs {

router_id KeepAlive_Mysql

}

vrrp_script check_run {

script "/home/sysadmin/switch/mysql/mycheck.sh"

interval 10

}

vrrp_sync_group VG1 {

group {

VI_1

}

vrrp_instance VI_1 {

state BACKUP

interface eth1

virtual_router_id 51

priority 90

advert_int 1

nopreempt

authentication {

auth_type PASS

auth_pass 1234.com

}

track_script {

check_run

}

notify_master /home/sysadmin/switch/mysql/mymaster.sh

notify_backup /home/sysadmin/switch/mysql/mybackup.sh

notify_stop /home/sysadmin/switch/mysql/mystop.sh

virtual_ipaddress {

10.50.15.99/24 brd 10.50.15.255 dev eth1 label eth1:0

}

3.4. 修改默认输出日志位置

主备机同时都修改，此次将keepalived的日志，计划保存在/var/log/keepalived.log文件中。

1、修改/etc/sysconfig/keepalived参数文件

KEEPALIVED_OPTIONS="-D " //将默认值修改为以下语句

KEEPALIVED_OPTIONS="-D -d -S 0"

2、修改/etc/rsyslog.conf配置文件，在文件最后加入如下语句

local0.* /var/log/keepalived.log

3、重新启动相关服务

/etc/init.d/rsyslog restart

/etc/init.d/keepalived restart

3.5. Keepalived启动和停止

#/etc/init.d/keepalived start //启动

#/etc/init.d/keepalived stop //停止

切换验证

4.1. 停止主端

1、将mysql进程杀死，

# pkill mysqld

4.2. 检查状态

1、主端查看脚本切换日志/home/sysadmin/switch/mysql/logs/mysql_switch.log

2017-07-31 09:57:15 The mycheck.sh, mysql is running...

2017-07-31 09:57:25 The mycheck.sh, mysql is running...

2017-07-31 09:57:35 The mycheck.sh, mysql is running...

2017-07-31 09:57:45 The mycheck.sh, mysql is running...

2017-07-31 09:57:55 The mycheck.sh, mysql is running...

2017-07-31 09:58:05 The mycheck.sh, mysql is running...

2017-07-31 09:58:15 The mycheck.sh, mysql is running...

2017-07-31 09:58:25 The mycheck.sh, mysql is running...

2017-07-31 09:58:35 The mycheck.sh, mysql is running...

2017-07-31 09:58:47 The mycheck.sh, mysql is down, after switch...

2017-07-31 09:58:50 The mystop.sh, master sync ok...

2、主端查看浮动IP地址的切换过程。

#浮动IP地址原先在Master端，如下：

# 切换后，在从Master端验查看，浮动IP已被切走到备机

# 在Slave端查看验证，确认

# 外部ping浮动IP地址效果，有一个丢包

3、主端Keepalived日志/var/log/keepalived.log如下：

Jul 31 09:58:47 MYSQL-APP-T01 Keepalived_healthcheckers[25351]: Stopped

Jul 31 09:58:47 MYSQL-APP-T01 Keepalived_vrrp[25352]: /home/sysadmin/switch/mysql/mycheck.sh exited due to signal 15

Jul 31 09:58:47 MYSQL-APP-T01 Keepalived_vrrp[25352]: VRRP_Instance(VI_1) sent 0 priority

Jul 31 09:58:47 MYSQL-APP-T01 Keepalived_vrrp[25352]: VRRP_Instance(VI_1) removing protocol VIPs.

Jul 31 09:58:47 MYSQL-APP-T01 Keepalived[25350]: Stopping

Jul 31 09:58:48 MYSQL-APP-T01 Keepalived_vrrp[25352]: Stopped

Jul 31 09:58:48 MYSQL-APP-T01 Keepalived[25350]: Stopped Keepalived v1.3.5 (03/19,2017), git commit v1.3.5-6-g6fa32f2

4、备端查看切换日志/home/sysadmin/switch/mysql/logs/mysql_switch.log

5、备端，查看/var/log/keepalived.log日志

Jul 31 09:58:49 MYSQL-APP-T02 Keepalived_vrrp[28648]: VRRP_Instance(VI_1) Transition to MASTER STATE

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: VRRP_Instance(VI_1) Entering MASTER STATE

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: VRRP_Instance(VI_1) setting protocol VIPs.

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: Sending gratuitous ARP on eth1 for 10.50.15.99

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1 for 10.50.15.99

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: Sending gratuitous ARP on eth1 for 10.50.15.99

Jul 31 09:58:50 MYSQL-APP-T02 Keepalived_vrrp[28648]: Opening script file /home/sysadmin/switch/mysql/mymaster.sh

Jul 31 09:58:55 MYSQL-APP-T02 Keepalived_vrrp[28648]: Sending gratuitous ARP on eth1 for 10.50.15.99

Jul 31 09:58:55 MYSQL-APP-T02 Keepalived_vrrp[28648]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1 for 10.50.15.99

Jul 31 09:58:55 MYSQL-APP-T02 Keepalived_vrrp[28648]: Sending gratuitous ARP on eth1 for 10.50.15.99

6、查看主备端数据库测试表的数据

#主端

[root@MYSQL-APP-T01 ~]# mysql -uroot -p -e "use test;select * from tab1;"

+------+

| id |

+------+

| 1 |

| 2 |

| 3 |

| 4 |

| 5 |

| 6 |

| 7 |

| 8 |

| 9 |

| 10 |

| 11 |

| 12 |

+------+

#备端

[root@MYSQL-APP-T02 ~]# mysql -uroot -p -e "use test;select * from tab1;"

+------+

| id |

+------+

| 1 |

| 2 |

| 3 |

| 4 |

| 5 |

| 6 |

| 7 |

| 8 |

| 9 |

| 10 |

| 11 |

| 12 |

+------+

7、当主端Mysql停止后，向备端Mysql插入数据

#查看插入数据的效果

[root@MYSQL-APP-T02 syncposfile]# mysql -uroot -p-e "use test;select * from tab1;"

+------+

| id |

+------+

| 1 |

| 2 |

| 3 |

| 4 |

| 5 |

| 6 |

| 7 |

| 8 |

| 9 |

| 10 |

| 11 |

| 12 |

| 13 |

| 14 |

| 15 |

| 16 |

| 17 |

| 18 |

| 13 |

| 14 |

| 15 |

| 16 |

| 17 |

| 18 |

+------+

4.3. 启动主端

1、主端重新启动的Mysql和Keepalived的进程

#./bin/mysqld_safe --user=mysql &

2、主端启动keepalived进程/etc/init.d/keepalived start

3、验证主端数据是否同步成功

mysql> use test;

Database changed

mysql> select * from tab1;

+------+

| id |

+------+

| 1 |

| 2 |

| 3 |

| 4 |

| 5 |

| 6 |

| 8 |

| 9 |

| 10 |

| 11 |

| 12 |

| 8 |

| 13 |

| 14 |

| 15 |

| 16 |

| 17 |

| 18 |

| 13 |

| 14 |

| 15 |

| 16 |

| 17 |

| 18 |

+------+

24 rows in set (0.00 sec)

说明：当主端恢复正常后，此时提供Mysql服务的还是在备机，并没有回切。

4.4. 回切验证

1、备端停止keepalive进程 /etc/init.d/keepalived stop

2、查看以上相关日志状态

3、备端启动keepalive进程/etc/init.d/keepalived start

其它

5.1. 日志的检查

1、切换及运行状态检查日志，/home/sysadmin/switch/mysql/logs目录下mysql_switch.log

由于keepalived每10秒检查一次mysql的运行状态，并将检查日志结果输出到mysql_switch.log中，运维过程中需要注意该日志的持续增长情况。

2、 Keepalived运行日志及切换日志 /var/log/keepalived.log

赞成为第一个赞同者

编写评论...

Keepalived与MySQL互为主从自动切换配置手册

2. MySQL互为主从配置

猜你喜欢