python的工作记录B

这次很强了。就差最后一步，判断一下SVN的版本是否是真的库的。

#!/usr/bin/env python
# -*- coding: utf-8 -*-
import os,sys,commands,subprocess  
import re,time
from optparse import OptionParser


#SVN的仓库地址，其实都是同一个，但为了安全和区别，写入具体地址
svnUrl = "svn://XX"
prefix = "/XX/"
#定义远程更新文件的根目录,与测试和真实环境有关的判断，用字典简单实现
sitePathDic = {"X":"/XX", "X":"/XX"}
#定义将SVN放入本地SALTSTACK的目录
updateFolder = "/srv/salt/XX/"
#定义SALT-MINION客户端地址
saltMinionDic = {"rX":"X", "tX":"X"}
#定义推送文件的saltstack-master的文件地址
saltMasterUrl = "salt://X/"
#维护两个文件列表，一个本地，一个远程
localFileList = []
remoteFileList = []

def getSvnFile(rVersion):
    #清空上次更新的所有文件
    delCmd = "rm -rf " + updateFolder + "*"
    os.system(delCmd)
    print '\033[0;32;40m'
    print "Delete old saltstack files..."
    #因为每次只更新固定版本的文件，所以，要先得到文件列表，再一个一个导出为和网站一样的标准目录结构
    svnLogCmd ="svn log -v -r" + rVersion +" " + svnUrl + " --username "
    svnLogOut = subprocess.Popen(svnLogCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)  
    for line in svnLogOut.stdout.readlines():
    #将输出命令的非标准行去掉
        if len(line.strip())!=0 and line.startswith("  "):
            #将标准行中的A,C,M等字符去掉
        svnFileName = line.split()[1]
        #替换为相对于网站的根目录
        fileList = svnFileName.replace(prefix,'')
        #取出相对于根目录的文件夹，判断是否存在和建立
        folderList = '/'.join(fileList.split('/')[:-1])
        if not os.path.exists(updateFolder + folderList):
        mkdirCmd = "mkdir " + updateFolder + folderList  + " -p"
        os.system(mkdirCmd)
        #print "Make a new dir: " + updateFolder + folderList
        #判断取出的最后的字段是目录还是文件，如果是文件夹，需要新建，这就需要规定文件夹不能包含.，而文件名必须包含.，否则无法进行这一步判定
        #这个判断我很纠结，如果更新不涉及SVN新建目录，就省事多了。
        if '.' not in fileList.split('/')[-1]:
        mkdirCmd = "mkdir " + updateFolder + fileList  + " -p"
                os.system(mkdirCmd)
        #print "Make a new dir: " + updateFolder + fileList
            #将文件放入列表，方便在更新到正式网站之后，循环修改相关权限()。
        localFileList.append(fileList)
            remoteFileList.append(sitePathDic[svnType] + '/' + fileList)
            svnExportCmd = "svn export " + svnUrl + '/' + fileList + " " + updateFolder + fileList
            subprocess.Popen(svnExportCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    print "Finished export Svn File into salt-master "

def backupFile(bFileName, str_now):
    #加强安装性，备份后缀加PHP
    suffix = str_now + ".old.php"
    saltCpCmdPre = "salt '" + saltMinionDic[svnType] + "' cmd.run " + "' cp -p "
    cpCmd = saltCpCmdPre + bFileName + " " + bFileName + suffix +"'"
    subprocess.Popen(cpCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)

def updateFile(localFile, remoteFile):
    #更新文件
    saltGetFilePre = "salt '" + saltMinionDic[svnType] + "' cp.get_file " + saltMasterUrl
    saltCpCmd = saltGetFilePre + localFile + " " + remoteFile + " makedirs=True"
    subprocess.Popen(saltCpCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)

#由于新建文件夹，SALTSTACK的权限所有者的更新在第一次不起作用，故而在CP好文件之后，单独进行权限更新
def chOwnMod(remoteFile):
    saltChownCmdPre = "salt '" + saltMinionDic[svnType] + "' cmd.run " + "'chown X"
    saltChownCmd = saltChownCmdPre + remoteFile + "'"
    subprocess.Popen(saltChownCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    saltChmodCmdPre = "salt '" + saltMinionDic[svnType] + "' cmd.run " + "'chmod X "
    saltChmodCmd = saltChmodCmdPre + remoteFile + "'"
    subprocess.Popen(saltChmodCmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)

def main():
    getSvnFile(svnRev)

    #统一更新备份的时间
    now = time.localtime()
    str_now = time.strftime("%Y-%m-%d-%H-%M-%S", now)
    for file in remoteFileList:
        backupFile(file, str_now)
    print "Finished back file-" + str_now
    print '\033[0m'
    for local,remote in zip(localFileList,remoteFileList):
    updateFile(local,remote)
        print "update file : " + remote

    #由于新建文件夹的权限更新执行太快，会不成功，故而停五秒之后再确认权限
    print "Wait 5 seconds to start update permission"
    time.sleep(5)
    for remoteFile in remoteFileList:
    chOwnMod(remoteFile)
    print '\033[0;32;40m'
    print "Finished. update success!"
    print '\033[0m'

if __name__=="__main__":
    #定义命令行参数
    usage = "usage: %prog [options] arg :X.py -rX -tXe"
    parser = OptionParser(usage)
    parser.add_option("-r", "--rev", dest="rev", help="input the rev number.")
    parser.add_option("-t", "--type", dest="type", help="input the update type")
    (options, args) = parser.parse_args()
    if options.rev:
        svnRev = options.rev
    else:
    print '\033[0;31;40m'
        print "input no svn Reversion"
    print '\033[0m'
        sys.exit(1)
    if options.type:
        svnType = options.type
        regex=ur"(XerX)" #判断是否是特定参数
    if re.search(regex, svnType):
            pass
    else:
        print '高效管理的三个层次\033[0;31;40m'
            print "svn type is wrong,it must 'Xe' or 'reX'"
            print '\033[0m'
        sys.exit(1)

    else:
    print '\033[0;31;40m'
        print "input no svn update type"
    print '\033[0m'
        sys.exit(1)

    main()