简介
为什么使用SeasLog
log日志,通常是系统或软件、应用的运行记录。通过log的分析,可以方便用户了解系统或软件、应用的运行情况;如果你的应用log足够丰富,也可以分析以往用户的操作行为、类型喜好、地域分布或其他更多信息;如果一个应用的log同时也分了多个级别,那么可以很轻易地分析得到该应用的健康状况,及时发现问题并快速定位、解决问题,补救损失。
php内置error_log、syslog函数功能强大且性能极好,但由于各种缺陷(error_log无错误级别、无固定格式,syslog不分模块、与系统日志混合),灵活度降低了很多,不能满足应用需求。
好消息是,有不少第三方的log类库弥补了上述缺陷,如log4php、plog、Analog等(当然也有很多应用在项目中自己开发的log类)。其中以log4php最为著名,设计精良、格式完美、文档完善、功能强大。推荐。
不过log4php在性能方面表现非常差,下图是SeasLog与log4php的ab并发性能测试( 测试环境:Ubuntu12.04单机,CPU I3,内存 16G,硬盘 SATA 7200):
那么有没有一种log类库满足以下需求呢:
- 分模块、分级别
- 配置简单(最好是勿须配置)
- 日志格式清晰易读
- 应用简单、性能很棒
SeasLog 正是应此需求而生。
目前提供了什么
- 在PHP项目中便捷、规范地记录log
- 可配置的默认log目录与模块
- 指定log目录与获取当前配置
- 初步的分析预警框架
- 高效的日志缓冲、便捷的缓冲debug
- 遵循 PSR-3 日志接口规范
- 自动记录错误信息
- 自动记录异常信息
- 连接TCP端口,以RFC5424格式发送日志
- 连接UDP端口,以RFC5424格式发送日志
- 支持RequestId区分请求
- 支持日志模板自定义
目标是怎样的
- 便捷、规范的log记录
- 高效的海量log分析
- 可配置、多途径的log预警
安装
编译安装 SeasLog
$ wget https://github.com/Neeke/SeasLog/archive/master.zip $ unzip master.zip $ cd /path/to/SeasLog $ phpize $ ./configure --with-php-config=/path/to/php-config $ make -j2 $ sudo make install
seaslog.ini的配置
- seaslog.disting_type = 1 开启以type分文件,即log文件区分info\warn\erro
- seaslog.disting_by_hour = 1 开启每小时划分一个文件
- seaslog.use_buffer = 1 开启buffer。默认关闭。当开启此项时,日志预存于内存,当请求结束时(或异常退出时)一次写入文件。
- seaslog.buffer_size = 100 设置缓冲数量为100. 默认为0,即无缓冲数量限制.当buffer_size大于0时,缓冲量达到该值则写一次文件.
- seaslog.level = 8 记录的日志级别.默认为8,即所有日志均记录。
- seaslog.level = 0 记录EMERGENCY。
- seaslog.level = 1 记录EMERGENCY、ALERT。
- seaslog.level = 2 记录EMERGENCY、ALERT、CRITICAL。
- seaslog.level = 3 记录EMERGENCY、ALERT、CRITICAL、ERROR。
- seaslog.level = 4 记录EMERGENCY、ALERT、CRITICAL、ERROR、- WARNING。
- seaslog.level = 5 记录EMERGENCY、ALERT、CRITICAL、ERROR、WARNING、NOTICE。
- seaslog.level = 6 记录EMERGENCY、ALERT、CRITICAL、ERROR、WARNING、NOTICE、INFO。
- seaslog.level = 7 记录EMERGENCY、ALERT、CRITICAL、ERROR、WARNING、NOTICE、INFO、DEBUG。
- seaslog.throw_exception = 1 开启抛出SeasLog抛出自身的异常。当出现录权限或接收服务器端口不通等情况时,抛出异常;关闭时不抛出异常。
- seaslog.ignore_warning = 1 开启忽略SeasLog自身的警告。当出现目录权限或接收服务器端口不通等情况时,将进行忽略;关闭时,将抛出警告。
自定义日志模板
很多朋友在使用过程中提到自定义日志模板的需求,于是自1.7.2版本开始,拥有了这个能力,允许用户自定义日志的模板, 同时在模板中可以使用预置的诸多预设变量,参照预设变量表。
日志模板说明
- 模板默认为:seaslog.default_template = "%T | %L | %P | %Q | %t | %M",意味着,默认的格式为{dateTime} | {level} | {pid} | {uniqid} | {timeStamp} | {logInfo}
- 如果自定义的格式为:seaslog.default_template = "[%T]:%L %P %Q %t %M"
那么,日志格式将被自定义为:[{dateTime}]:{level} {pid} {uniqid} {timeStamp} {logInfo}
注意:%L 必须在%M之前,即:日志级别,必须在日志内容之前。
自定义日志模版变量表
SeasLog提供了下列预设变量,可以直接使用在日志模板中,将在日志最终生成时替换成对应值。
- %L - Level 日志级别。
- %M - Message 日志信息。
- %T - DateTime 如2017-08-16 19:15:02,受seaslog.default_datetime_format影响。
- %t - Timestamp 如1502882102.862,精确到毫秒数。
- %Q - RequestId 区分单次请求,如没有调用SeasLog::setRequestId($string)方法,则在初始化请求时,采用内置的static char *get_uniqid()方法生成的惟一值。
- %H - HostName 主机名。
- %P - ProcessId 进程ID。
- %D - Domain:Port 域名:口号,如www.cloudwise.com:8080; Cli模式下为cli。
- %R - Request URI 请求URI,如/app/user/signin; Cli模式下为入口文件,如CliIndex.php。
- %m - Request Method 请求类型,如GET; Cli模式下为执行命令,如/bin/bash。
- %I - Client IP 来源客户端IP; Cli模式下为local。取值优先级为:HTTP_X_REAL_IP > HTTP_X_FORWARDED_FOR > REMOTE_ADDR
- %F - FileName:LineNo 文件名:行号,如UserService.php:118。
- %C - TODO Class::Action 类名::方法名,如UserService::getUserInfo。
使用
常量与函数
常量列表
SeasLog 共将日志分成8个级别
SEASLOG_DEBUG
- "DEBUG" - debug信息、细粒度信息事件
SEASLOG_INFO
- "INFO" - 重要事件、强调应用程序的运行过程
SEASLOG_NOTICE
- "NOTICE" - 一般重要性事件、执行过程中较INFO级别更为重要的信息
SEASLOG_WARNING
- "WARNING" - 出现了非错误性的异常信息、潜在异常信息、需要关注并且需要修复
SEASLOG_ERROR
- "ERROR" - 运行时出现的错误、不必要立即进行修复、不影响整个逻辑的运行、需要记录并做检测
SEASLOG_CRITICAL
- "CRITICAL" - 紧急情况、需要立刻进行修复、程序组件不可用
SEASLOG_ALERT
- "ALERT" - 必级立即采取行动的紧急事件、需要立即通知相关人员紧急修复
SEASLOG_EMERGENCY
- "EMERGENCY" - 系统不可用
var_dump(SEASLOG_DEBUG,SEASLOG_INFO,SEASLOG_NOTICE); /* string('DEBUG') debug级别 string('INFO') info级别 string('NOTICE') notice级别 */
函数列表
SeasLog 提供了这样一组函数,可以方便地获取与设置根目录、模块目录、快速写入与统计log。 相信从下述伪代码的注释中,您可以快速获取函数信息,具体使用将紧接其后:
<?php /** * @author [email protected] * Date: 14-1-27 下午4:47 */ define('SEASLOG_ALL', 'ALL'); define('SEASLOG_DEBUG', 'DEBUG'); define('SEASLOG_INFO', 'INFO'); define('SEASLOG_NOTICE', 'NOTICE'); define('SEASLOG_WARNING', 'WARNING'); define('SEASLOG_ERROR', 'ERROR'); define('SEASLOG_CRITICAL', 'CRITICAL'); define('SEASLOG_ALERT', 'ALERT'); define('SEASLOG_EMERGENCY', 'EMERGENCY'); define('SEASLOG_DETAIL_ORDER_ASC', 1); define('SEASLOG_DETAIL_ORDER_DESC', 2); class SeasLog { public function __construct() { #SeasLog init } public function __destruct() { #SeasLog distroy } /** * 设置basePath * * @param $basePath * * @return bool */ static public function setBasePath($basePath) { return TRUE; } /** * 获取basePath * * @return string */ static public function getBasePath() { return 'the base_path'; } /** * 设置本次请求标识 * @param string * @return bool */ static public function setRequestID($request_id){ return TRUE; } /** * 获取本次请求标识 * @return string */ static public function getRequestID(){ return uniqid(); } /** * 设置模块目录 * @param $module * * @return bool */ static public function setLogger($module) { return TRUE; } /** * 获取最后一次设置的模块目录 * @return string */ static public function getLastLogger() { return 'the lastLogger'; } /** * 设置DatetimeFormat配置 * @param $format * * @return bool */ static public function setDatetimeFormat($format) { return TRUE; } /** * 返回当前DatetimeFormat配置格式 * @return string */ static public function getDatetimeFormat() { return 'the datetimeFormat'; } /** * 统计所有类型(或单个类型)行数 * @param string $level * @param string $log_path * @param null $key_word * * @return array | long */ static public function analyzerCount($level = 'all', $log_path = '*', $key_word = NULL) { return array(); } /** * 以数组形式,快速取出某类型log的各行详情 * * @param $level * @param string $log_path * @param null $key_word * @param int $start * @param int $limit * @param $order 默认为正序 SEASLOG_DETAIL_ORDER_ASC,可选倒序 SEASLOG_DETAIL_ORDER_DESC * * @return array */ static public function analyzerDetail($level = SEASLOG_INFO, $log_path = '*', $key_word = NULL, $start = 1, $limit = 20, $order = SEASLOG_DETAIL_ORDER_ASC) { return array(); } /** * 获得当前日志buffer中的内容 * * @return array */ static public function getBuffer() { return array(); } /** * 将buffer中的日志立刻刷到硬盘 * * @return bool */ static public function flushBuffer() { return TRUE; } /** * 记录debug日志 * * @param $message * @param array $content * @param string $module */ static public function debug($message, array $content = array(), $module = '') { #$level = SEASLOG_DEBUG } /** * 记录info日志 * * @param $message * @param array $content * @param string $module */ static public function info($message, array $content = array(), $module = '') { #$level = SEASLOG_INFO } /** * 记录notice日志 * * @param $message * @param array $content * @param string $module */ static public function notice($message, array $content = array(), $module = '') { #$level = SEASLOG_NOTICE } /** * 记录warning日志 * * @param $message * @param array $content * @param string $module */ static public function warning($message, array $content = array(), $module = '') { #$level = SEASLOG_WARNING } /** * 记录error日志 * * @param $message * @param array $content * @param string $module */ static public function error($message, array $content = array(), $module = '') { #$level = SEASLOG_ERROR } /** * 记录critical日志 * * @param $message * @param array $content * @param string $module */ static public function critical($message, array $content = array(), $module = '') { #$level = SEASLOG_CRITICAL } /** * 记录alert日志 * * @param $message * @param array $content * @param string $module */ static public function alert($message, array $content = array(), $module = '') { #$level = SEASLOG_ALERT } /** * 记录emergency日志 * * @param $message * @param array $content * @param string $module */ static public function emergency($message, array $content = array(), $module = '') { #$level = SEASLOG_EMERGENCY } /** * 通用日志方法 * @param $level * @param $message * @param array $content * @param string $module */ static public function log($level, $message, array $content = array(), $module = '') { } }
PHP Re 结果
/usr/local/php/php-7.0.6-zts-debug/bin/php --re seaslog Extension [ <persistent> extension #32 SeasLog version 1.6.9 ] { - Dependencies { } - INI { Entry [ seaslog.default_basepath <ALL> ] Current = '/var/log/www' } Entry [ seaslog.default_logger <ALL> ] Current = 'defauult' } Entry [ seaslog.default_datetime_format <ALL> ] Current = 'Y-m-d H:i:s' } Entry [ seaslog.default_template <ALL> ] Current = '%L | %P | %Q | %t | %T | %M' } Entry [ seaslog.disting_type <ALL> ] Current = '0' } Entry [ seaslog.disting_by_hour <ALL> ] Current = '0' } Entry [ seaslog.use_buffer <ALL> ] Current = '1' } Entry [ seaslog.trace_error <ALL> ] Current = '1' } Entry [ seaslog.trace_exception <ALL> ] Current = '1' } Entry [ seaslog.buffer_size <ALL> ] Current = '10' } Entry [ seaslog.level <ALL> ] Current = '0' } Entry [ seaslog.appender <ALL> ] Current = '1' } Entry [ seaslog.remote_host <ALL> ] Current = '127.0.0.1' } Entry [ seaslog.remote_port <ALL> ] Current = '514' } Entry [ seaslog.trim_wrap <ALL> ] Current = '0' } Entry [ seaslog.throw_exception <ALL> ] Current = '1' } Entry [ seaslog.ignore_warning <ALL> ] Current = '1' } } - Constants [16] { Constant [ string SEASLOG_VERSION ] { 1.7.5 } Constant [ string SEASLOG_AUTHOR ] { Chitao.Gao [ [email protected] ] } Constant [ string SEASLOG_ALL ] { ALL } Constant [ string SEASLOG_DEBUG ] { DEBUG } Constant [ string SEASLOG_INFO ] { INFO } Constant [ string SEASLOG_NOTICE ] { NOTICE } Constant [ string SEASLOG_WARNING ] { WARNING } Constant [ string SEASLOG_ERROR ] { ERROR } Constant [ string SEASLOG_CRITICAL ] { CRITICAL } Constant [ string SEASLOG_ALERT ] { ALERT } Constant [ string SEASLOG_EMERGENCY ] { EMERGENCY } Constant [ integer SEASLOG_DETAIL_ORDER_ASC ] { 1 } Constant [ integer SEASLOG_DETAIL_ORDER_DESC ] { 2 } Constant [ integer SEASLOG_APPENDER_FILE ] { 1 } Constant [ integer SEASLOG_APPENDER_TCP ] { 2 } Constant [ integer SEASLOG_APPENDER_UDP ] { 3 } } - Functions { Function [ <internal:SeasLog> function seaslog_get_version ] { } Function [ <internal:SeasLog> function seaslog_get_author ] { } } - Classes [1] { Class [ <internal:SeasLog> class SeasLog ] { - Constants [0] { } - Static properties [0] { } - Static methods [19] { Method [ <internal:SeasLog> static public method setBasePath ] { - Parameters [1] { Parameter #0 [ <required> $base_path ] } } Method [ <internal:SeasLog> static public method getBasePath ] { } Method [ <internal:SeasLog> static public method setLogger ] { - Parameters [1] { Parameter #0 [ <required> $logger ] } } Method [ <internal:SeasLog> static public method getLastLogger ] { } Method [ <internal:SeasLog> static public method setRequestID ] { - Parameters [1] { Parameter #0 [ <required> $request_id ] } } Method [ <internal:SeasLog> static public method getRequestID ] { } Method [ <internal:SeasLog> static public method setDatetimeFormat ] { - Parameters [1] { Parameter #0 [ <required> $format ] } } Method [ <internal:SeasLog> static public method getDatetimeFormat ] { } Method [ <internal:SeasLog> static public method analyzerCount ] { - Parameters [3] { Parameter #0 [ <required> $level ] Parameter #1 [ <optional> $log_path ] Parameter #2 [ <optional> $key_word ] } } Method [ <internal:SeasLog> static public method analyzerDetail ] { - Parameters [6] { Parameter #0 [ <required> $level ] Parameter #1 [ <optional> $log_path ] Parameter #2 [ <optional> $key_word ] Parameter #3 [ <optional> $start ] Parameter #4 [ <optional> $limit ] Parameter #5 [ <optional> $order ] } } Method [ <internal:SeasLog> static public method getBuffer ] { } Method [ <internal:SeasLog> static public method flushBuffer ] { } Method [ <internal:SeasLog> static public method log ] { - Parameters [4] { Parameter #0 [ <required> $level ] Parameter #1 [ <optional> $message ] Parameter #2 [ <optional> $content ] Parameter #3 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method debug ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method info ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method notice ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method warning ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method error ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method critical ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method alert ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } Method [ <internal:SeasLog> static public method emergency ] { - Parameters [3] { Parameter #0 [ <required> $message ] Parameter #1 [ <optional> $content ] Parameter #2 [ <optional> $logger ] } } } - Properties [0] { } - Methods [2] { Method [ <internal:SeasLog, ctor> public method __construct ] { } Method [ <internal:SeasLog, dtor> public method __destruct ] { } } } } }
SeasLog Logger的使用
获取与设置basePath
直接使用 SeasLog::getBasePath(),将获取php.ini(seaslog.ini)中设置的seaslog.default_basepath 的值。 使用 SeasLog::setBasePath() 函数,将改变 SeasLog::getBasePath() 的取值。设置logger与获取lastLogger
- 与basePath相类似的,
- 直接使用 SeasLog::getLastLogger(),将获取php.ini(seaslog.ini)中设置的seaslog.default_logger的值。
- 使用 SeasLog::setLogger() 函数,将改变 SeasLog::getLastLogger()的取值。
快速写入log
上面已经设置过了basePath与logger,于是log记录的目录已经产生了,
log记录目录 = basePath / logger / {fileName}.log log文件名,以 年月日 分文件,如今天是2014年02月18日期,那么 {fileName} = 20140218;
还记得 php.ini 中设置的 seaslog.disting_type 吗?
默认的 seaslog.disting_type = 0,如果今天我使用了 SeasLog ,那么将产生最终的log文件:
- LogFile = basePath / logger / 20140218.log 如果 seaslog.disting_type = 1,则最终的log文件将是这样的三个文件
- infoLogFile = basePath / logger / 20140218.INFO.log
- warnLogFile = basePath / logger / 20140218.WARNING.log
- erroLogFile = basePath / logger / 20140218.ERROR.log
SeasLog::log(SEASLOG_ERROR,'this is a error test by ::log'); SeasLog::debug('this is a {userName} debug',array('{userName}' => 'neeke')); SeasLog::info('this is a info log'); SeasLog::notice('this is a notice log'); SeasLog::warning('your {website} was down,please {action} it ASAP!',array('{website}' => 'github.com','{action}' => 'rboot')); SeasLog::error('a error log'); SeasLog::critical('some thing was critical'); SeasLog::alert('yes this is a {messageName}',array('{messageName}' => 'alertMSG')); SeasLog::emergency('Just now, the house next door was completely burnt out! {note}',array('{note}' => 'it`s a joke')); /* 这些函数同时也接受第3个参数为logger的设置项 注意,当last_logger == 'default'时等同于: SeasLog::setLogger('test/new/path'); SeasLog::error('test error 3'); 如果已经在前文使用过SeasLog::setLogger()函数,第3个参数的log只在此处临时使用,不影响下文。 */
log格式受seaslog.default_template影响。 seaslog.default_template默认模板为 seaslog.default_template = "%T | %L | %P | %Q | %t | %M" 那么在默认情况下,日志格式为: {dateTime} | {level} | {pid} | {uniqid} | {timeStamp} | {logInfo} 关于自定义模板,及SeasLog中的预置值,可参阅 自定义日志模板
2014-07-27 08:53:52 | ERROR | 23625 | 599159975a9ff | 1406422432.786 | this is a error test by log 2014-07-27 08:53:52 | DEBUG | 23625 | 599159975a9ff | 1406422432.786 | this is a neeke debug 2014-07-27 08:53:52 | INFO | 23625 | 599159975a9ff | 1406422432.787 | this is a info log 2014-07-27 08:53:52 | NOTICE | 23625 | 599159975a9ff | 1406422432.787 | this is a notice log 2014-07-27 08:53:52 | WARNING | 23625 | 599159975a9ff | 1406422432.787 | your github.com was down,please rboot it ASAP! 2014-07-27 08:53:52 | ERROR | 23625 | 599159975a9ff | 1406422432.787 | a error log 2014-07-27 08:53:52 | CRITICAL | 23625 | 599159975a9ff | 1406422432.787 | some thing was critical 2014-07-27 08:53:52 | EMERGENCY | 23625 | 599159975a9ff | 1406422432.787 | Just now, the house next door was completely burnt out! it is a joke
当seaslog.appender配置为 2(TCP) 或 3(UDP) 时,日志将推送至remote_host:remote_port的TCP或UDP端口
SeasLog发送至远端时,遵循规范RFC5424 log格式统一为: <PRI>1 {timeStampWithRFC3339} {HostName} {loggerName}[{pid}]: {logInfo} 上述{logInfo} 受配置 seaslog.default_template影响。
发送出去的格式如: <15>1 2017-08-27T01:24:59+08:00 vagrant-ubuntu-trusty test/logger[27171]: 2016-06-25 00:59:43 | DEBUG | 21423 | 599157af4e937 | 1466787583.322 | this is a neeke debug <14>1 2017-08-27T01:24:59+08:00 vagrant-ubuntu-trusty test/logger[27171]: 2016-06-25 00:59:43 | INFO | 21423 | 599157af4e937 | 1466787583.323 | this is a info log <13>1 2017-08-27T01:24:59+08:00 vagrant-ubuntu-trusty test/logger[27171]: 2016-06-25 00:59:43 | NOTICE | 21423 | 599157af4e937 | 1466787583.324 | this is a notice log
SeasLog Analyzer的使用
快速统计某类型log的count值
SeasLog在扩展中使用管道调用shell命令 grep -wc快速地取得count值,并返回值(array || int)给PHP。
$countResult_1 = SeasLog::analyzerCount(); $countResult_2 = SeasLog::analyzerCount(SEASLOG_WARNING); $countResult_3 = SeasLog::analyzerCount(SEASLOG_ERROR,date('Ymd',time())); var_dump($countResult_1,$countResult_2,$countResult_3); /* array(8) { ["DEBUG"]=> int(3) ["INFO"]=> int(3) ["NOTICE"]=> int(3) ["WARNING"]=> int(3) ["ERROR"]=> int(6) ["CRITICAL"]=> int(3) ["ALERT"]=> int(3) ["EMERGENCY"]=> int(3) } int(7) int(1) */
获取某类型log列表
SeasLog在扩展中使用管道调用shell命令 grep -w快速地取得列表,并返回array给PHP。
$detailErrorArray_inAll = SeasLog::analyzerDetail(SEASLOG_ERROR); $detailErrorArray_today = SeasLog::analyzerDetail(SEASLOG_ERROR,date('Ymd',time())); var_dump($detailErrorArray_inAll,$detailErrorArray_today); /* SeasLog::analyzerDetail(SEASLOG_ERROR) == SeasLog::analyzerDetail(SEASLOG_ERROR,'*'); 取当前模块下所有level为 SEASLOG_ERROR 的信息列表: array(6) { [0] => string(66) "2014-02-24 00:14:02 | ERROR | 8568 | 599157af4e937 | 1393172042.717 | test error 3 " [1] => string(66) "2014-02-24 00:14:04 | ERROR | 8594 | 5991576584446 | 1393172044.104 | test error 3 " [2] => string(66) "2014-02-24 00:14:04 | ERROR | 8620 | 1502697015147 | 1393172044.862 | test error 3 " [3] => string(66) "2014-02-24 00:14:05 | ERROR | 8646 | 599159975a9ff | 1393172045.989 | test error 3 " [4] => string(66) "2014-02-24 00:14:07 | ERROR | 8672 | 599159986ec28 | 1393172047.882 | test error 3 " [5] => string(66) "2014-02-24 00:14:08 | ERROR | 8698 | 5991599981cec | 1393172048.736 | test error 3 " } SeasLog::analyzerDetail(SEASLOG_ERROR,date('Ymd',time())); 只取得当前模块下,当前一天内,level为SEASLOG_ERROR 的信息列表: array(2) { [0] => string(66) "2014-02-24 00:14:02 | ERROR | 8568 | 599157af4e937 | 1393172042.717 | test error 3 " [1] => string(66) "2014-02-24 00:14:04 | ERROR | 8594 | 5991576584446 | 1393172044.104 | test error 3 " } 同理,取当月 $detailErrorArray_mouth = SeasLog::analyzerDetail(SEASLOG_ERROR,date('Ym',time())); */
使用SeasLog进行健康预警
预警的配置
[base] wait_analyz_log_path = /log/base_test [fork] ;是否开启多线程 1开启 0关闭 fork_open = 1 ;线程个数 fork_count = 3 [warning] email[smtp_host] = smtp.163.com email[smtp_port] = 25 email[subject_pre] = 预警邮件 - email[smtp_user] = [email protected] email[smtp_pwd] = seaslog#demo email[mail_from] = [email protected] email[mail_to] = [email protected] email[mail_cc] = [email protected] email[mail_bcc] = [analyz] ; enum ; SEASLOG_DEBUG "DEBUG" ; SEASLOG_INFO "INFO" ; SEASLOG_NOTICE "NOTICE" ; SEASLOG_WARNING "WARNING" ; SEASLOG_ERROR "ERROR" ; SEASLOG_CRITICAL "CRITICAL" ; SEASLOG_ALERT "ALERT" ; SEASLOG_EMERGENCY "EMERGENCY" test1[module] = test/bb test1[level] = SEASLOG_ERROR test1[bar] = 1 test1[mail_to] = [email protected] test2[module] = 222 test2[level] = SEASLOG_WARNING test3[module] = 333 test3[level] = SEASLOG_CRITICAL test4[module] = 444 test4[level] = SEASLOG_EMERGENCY test5[module] = 555 test5[level] = SEASLOG_DEBUG
crontab配置