目录
一、下载安装
apt-get install supervisor -y二、修改配置文件
echo_supervisord_conf >/etc/supervisor/supervisord.conf
sed -i '/\[unix_http_server]/c;\[unix_http_server]' /etc/supervisor/supervisord.conf
sed -i '/file=\/tmp\/supervisor.sock/c;file=\/tmp\/supervisor.sock' /etc/supervisor/supervisord.conf
sed -i '/;\[inet_http_server]/c[inet_http_server]' /etc/supervisor/supervisord.conf
sed -i '/;port=127.0.0.1:9001/cport=127.0.0.1:9001' /etc/supervisor/supervisord.conf
sed -i 's/port=127.0.0.1:9001/&\npassword=123456/' /etc/supervisor/supervisord.conf
sed -i 's/port=127.0.0.1:9001/&\nusername=user/' /etc/supervisor/supervisord.conf
sed -i '/;user=chrism/cuser=root' /etc/supervisor/supervisord.conf
sed -i '/serverurl=unix:\/\/\/tmp\/supervisor.sock/c;serverurl=unix:\/\/\/tmp\/supervisor.sock' /etc/supervisor/supervisord.conf
sed -i '/;serverurl=http:\/\/127.0.0.1:9001/cserverurl=http:\/\/127.0.0.1:9001' /etc/supervisor/supervisord.conf
sed -i '/;username=user/d' /etc/supervisor/supervisord.conf
sed -i '/;password=123/d' /etc/supervisor/supervisord.conf
sed -i '/;\[include]/c\[include]' /etc/supervisor/supervisord.conf
mkdir -p /etc/supervisor/conf.d
mkdir -p /home/work/logs
echo -e "files=/etc/supervisor/conf.d/*.ini" >>/etc/supervisor/supervisord.conf三、使能服务
systemctl disable supervisor
systemctl enable supervisor
systemctl daemon-reload
systemctl start supervisor四、使用supervisor
1. 添加自启程序配置文件
在 /etc/supervisor/conf.d/ 中添加xxxxxxxx.ini配置文件
示例如下
[program:npu]
command=/home/work/jt1078/npu_transfer_proxy
numprocs=1
process_name=npu_transfer_proxy%(process_num)d
loglevel=warn
autostart=true
startsecs=5
stopasgroup=true
killasgroup=true
autorestart=true
startretries=3
user=root
redirect_stderr=false
stdout_logfile_maxbytes=20MB ; stdout 日志文件大小，默认 50MB
stdout_logfile_backups=0 ; stdout 日志文件备份数
stderr_logfile_maxbytes=20MB ; stdout 日志文件大小，默认 50MB
stderr_logfile_backups=0
stdout_logfile=/home/work/logs/npu_transfer_proxy.log
stderr_logfile=/home/work/logs/npu_transfer_proxy_err.log
priority=1002. 进入supervisorctl程序控制页面
在第二项的配置文件修改中，默认的用户名被修改为user，默认密码被修改为123456
在命令行中输入supervisorctl，将用户名及密码输入
在进入supervisorctl程序控制页面后可使用如下命令控制自启程序
start all //开启所有自启程序
stop all //关闭所有自启程序
reload all //重新加载所有自启程序
restart all //重新启动所有自启程序 如果需要单独控制某一个应用程序把all换成应用程序名即可