编译安装的一般步骤：
安装依赖，安装依赖的第三方的工具，yum可以解决
编译安装的包中都有：configure 文件
进行预编译：检查你的环境是否合格
./configure --prefix=xxx
生成编译的文件：MakeFile
python安装：
安装依赖
linux>yum -y install gcc
linux>yum -y install zlib-devel bzip2-devel openssl-devel openssl-static ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel libffi-devel lzma
预编译：
linux>./configure --prefix=/opt/install/python3 --enable-optimizations
linux>make && make install
安装交互与设密
linux>cd /opt/install/python3/
linux> bin/pip3 install ipython3
linux> bin/pip3 install ipython
linux> bin/ipython3 //交互式提示
linux>bin/pip3 install jupyter notebook
如果报错：Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-fhjrdyjl/markupsafe/
You are using pip version 10.0.1, however version 23.1.2 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
解决办法：
linux> bin/pip3 install --upgrade pip==23.1.2
#生成配置文件
linux>bin/jupyter notebook --generate-config
在python的开发环境下
linux>bin/python3
>>> from notebook.auth import passwd //导入包然后写个password
>>> passwd()在·
Enter password:
Verify password:
'argon2:$argon2id$v=19$m=10240,t=10,p=8$kzSVdH70s31gVaA1GZRFOg$rDtOpmy9FiOiNng2HOimv+VdvlXIQw1GLMdnHeDCKRI'(复制此行密码，每人不一样)
linux>vim ~/.jupyter/jupyter_notebook_config.py
修改#c.NotebookApp.password = u'asfasdfasdfasdfasd' //修改密码
c.NotebookApp.ip = '*' //ip
c.NotebookApp.open_browser = False
c.NotebookApp.port = 8888(根据端口情况修改)
c.NotebookApp.allow_remote_access = True
关闭防护墙并启动
linux> bin/jupyter notebook --allow-root //安装好jupyter后启动服务
http://192.168.58.203:8888/tree
脚本安装
下载网址：mirrors.tuna.tsinghua.edu.cn
linux> bash Miniconda3-py37_4.8.2-Linux-x86_64.sh
Enter 回车
Do you accept the license terms? [yes|no]
[no] >>> yes
Miniconda3 will now be installed into this location:
/root/miniconda3
- Press ENTER to confirm the location
- Press CTRL-C to abort the installation
- Or specify a different location below
[/root/miniconda3] >>> /opt/install/minicond3
----是否写在配置文件里面 no 可能会把原来的python给搞宕
Preparing transaction: done
Executing transaction: done
installation finished.
Do you wish the installer to initialize Miniconda3
by running conda init? [yes|no]
[no] >>> no
安装好后进入软件目录
发行版 最好用bin/conda
linux> bin/conda --help
linux> bin/conda list //查看min下安装的软件
linux> bin/conda install ipython
linux> bin/conda install ipython3
linux> bin/ipython3