嵌入式实操----基于RT1170 移植memtester做SDRAM测试（二十五）

本文主要是通过迁移的思维，记录本人初次使用NXP MCUXpresso SDK API进行BSP开发

1. 移植来源

reference:
https://blog.51cto.com/henjay724/2711883
https://github.com/JayHeng/cortex-m-apps
由于RT1170上面没有SDRAM的压力测试工具，所以通过移植memtester工程至SoC,用于SDRAM的测量。

2. 应用

复制memtester目前至工程

将相关文件添加入工程当中

将添加相关的头文件路径：

增加相关的测试代码如下：

diff --git a/SDK_2.8.0_MIMXRT1170-EAR3/boards/easyarm-rt1170-revb/driver_examples/gpio_bootloader/led_output/cm7/gpio_led_output.c b/SDK_2.8.0_MIMXRT1170-EAR3/boards/easyarm-rt1170-revb/driver_examples/gpio_bootloader/led_output/cm7/gpio_led_output.c
index 2a3c5cca..6be89002 100644
--- a/SDK_2.8.0_MIMXRT1170-EAR3/boards/easyarm-rt1170-revb/driver_examples/gpio_bootloader/led_output/cm7/gpio_led_output.c
+++ b/SDK_2.8.0_MIMXRT1170-EAR3/boards/easyarm-rt1170-revb/driver_examples/gpio_bootloader/led_output/cm7/gpio_led_output.c
@@ -12,7 +12,7 @@
 #include "fsl_lpuart.h"
 #include "fsl_flexspi.h"
 #include "fsl_cache.h"
-
+#include "fsl_clock.h"
 
 #include "evkmimxrt1170_flexspi_nor_config.h"
 #include "pin_mux.h"
@@ -20,6 +20,7 @@
 #include "bsp_sdram.h"
 #include "bsp_sdram_test.h"
 #include "app.h"
+#include "memtester.h"
 /*******************************************************************************
  * Definitions
  ******************************************************************************/
@@ -42,7 +43,17 @@ extern void dump_build_info(void);
 /*******************************************************************************
  * Variables
  ******************************************************************************/
+typedef struct _semc_test_config {
    
    
+  uint32_t baseAddr;
+  uint32_t testSize;
+  uint32_t loopNum;
+  uint32_t dramFreq;
+  uint32_t enableCache;
+} semc_test_config_t;
+
+int fail_stop = 1;
 
+char memsuffix = 'B';
 /*******************************************************************************
  * Code
  ******************************************************************************/
@@ -478,6 +489,30 @@ int main(void)
     SEMC_SDRAMReadWrite16Bit();
     /* 8Bit data read and write. */
     SEMC_SDRAMReadWrite8Bit();
+
+    semc_test_config_t testConfig;
+    testConfig.baseAddr = 0x80000000;
+    testConfig.testSize = 32 * 1024 * 1024;
+    testConfig.loopNum = 1;
+    testConfig.dramFreq = CLOCK_GetRootClockFreq(kCLOCK_Root_Semc);
+    testConfig.enableCache = 0;
+    
+    if (!testConfig.enableCache) {
    
    
+        /* Disable D cache */
+        SCB_DisableDCache();
+    }
+
+    PRINTF("\r\n########## Print out from target board ##########\r\n");
+    PRINTF("\r\nSDRAM r/w test settings:\r\n");
+    PRINTF("      Base Addr: 0x%x;\r\n", testConfig.baseAddr);
+    PRINTF("      Test Size: %d Bytes;\r\n", testConfig.testSize);
+    PRINTF("      Test Loop: %d;\r\n", testConfig.loopNum);    
+    PRINTF("      SDRAM Freq: %d Hz;\r\n",testConfig.dramFreq);
+    PRINTF("      Enable Cache: %d;\r\n\r\n", testConfig.enableCache);
+
+    /* Run memory stress test: 64KByte, loop=1, page_size = 1kbyte */
+    memtester_main(testConfig.baseAddr, testConfig.testSize, &memsuffix, testConfig.loopNum, (1*1024));		
+		
 		#endif  // BSP_SDRAM_TEST

测试日记：

15:42:10:568--- RT1170 bootloader bootup   
15:42:10:568---
15:42:10:569--- UTS_VERSION: 2022/05/30-15:41:50
15:42:10:569---
15:42:10:569--- RT1170FW_BOOT_COMPILE_TIME: 2022/05/30-15:41:50
15:42:10:569---
15:42:10:580--- RT1170FW_BOOT_COMPILE_BY: Administrator
15:42:10:580---
15:42:10:581--- RT1170FW_BOOT_COMPILER: Keil compiler
15:42:10:581---
15:42:10:591--- RT1170FW_BOOT_VERSION: e93c445c301351f048d71f5c349c45f0072c3e0a
15:42:10:591---
15:42:10:592--- RT1170FW_BOOT_HARDWARE_BOARD: rt1170 mcu
15:42:10:592---
15:42:10:592---FLEXSPI example started!
15:42:10:592---Vendor ID: 0x17
15:42:10:599---Erasing Serial NOR over FlexSPI...
15:42:10:650---Erase data - successfully. 
15:42:10:650---Program data - successfully. 
15:42:10:650---
15:42:10:659--- SEMC SDRAM Write 32 bit Start, Start Address 0x80000000, Data Length 8388607 !
15:42:10:720---
15:42:10:720--- SEMC SDRAM Read 32 bit Data Start, Start Address 0x80000000, Data Length 8388607 !
15:42:10:978---
15:42:10:978--- SEMC SDRAM Write 32 bit Start, Start Address 0x80000001, Data Length 8388607 !
15:42:11:043---
15:42:11:043--- SEMC SDRAM Read 32 bit Data Start, Start Address 0x80000001, Data Length 8388607 !
15:42:11:327---
15:42:11:328--- SEMC SDRAM Write 32 bit Start, Start Address 0x80000002, Data Length 8388607 !
15:42:11:439---
15:42:11:439--- SEMC SDRAM Read 32 bit Data Start, Start Address 0x80000002, Data Length 8388607 !
15:42:11:722---
15:42:11:723--- SEMC SDRAM Write 32 bit Start, Start Address 0x80000003, Data Length 8388607 !
15:42:11:787---
15:42:11:788--- SEMC SDRAM Read 32 bit Data Start, Start Address 0x80000003, Data Length 8388607 !
15:42:12:070---
15:42:12:071--- SEMC SDRAM 32 bit Data Write and Read Compare Succeed!
15:42:12:071---
15:42:12:079--- SEMC SDRAM Write 16 bit Start, Start Address 0x80000000, Data Length 16777215 !
15:42:12:188---
15:42:12:188--- SEMC SDRAM Read 16 bit Data Start, Start Address 0x80000000, Data Length 16777215 !
15:42:12:479---
15:42:12:479--- SEMC SDRAM Write 16 bit Start, Start Address 0x80000001, Data Length 16777215 !
15:42:12:590---
15:42:12:590--- SEMC SDRAM Read 16 bit Data Start, Start Address 0x80000001, Data Length 16777215 !
15:42:12:915---
15:42:12:915--- SEMC SDRAM 16 bit Data Write and Read Compare Succeed!
15:42:12:915---
15:42:12:924--- SEMC SDRAM Memory 8 bit Write Start, Start Address 0x80000000, Data Length 33554432 !
15:42:13:034---
15:42:13:034--- SEMC SDRAM Read 8 bit Data Start, Start Address 0x80000000, Data Length 33554432 !
15:42:13:410---
15:42:13:411--- SEMC SDRAM 8 bit Data Write and Read Compare Succeed!
15:42:13:411---
15:42:13:411---########## Print out from target board ##########
15:42:13:411---
15:42:13:424---SDRAM r/w test settings:
15:42:13:424---      Base Addr: 0x80000000;
15:42:13:425---      Test Size: 33554432 Bytes;
15:42:13:425---      Test Loop: 1;
15:42:13:434---      SDRAM Freq: 163862064 Hz;
15:42:13:435---      Enable Cache: 0;
15:42:13:435---
15:42:13:435---memtester version 4.5.0 (32-bit)
15:42:13:435---Copyright (C) 2001-2020 Charles Cazabon.
15:42:13:449---Licensed under the GNU General Public License version 2 (only).
15:42:13:449---
15:42:13:449---want 32MB (33554432 bytes)
15:42:13:449---Loop 1/1:
15:42:37:926---  Stuck Address: ok
15:42:40:359---  Random Value: ok
15:42:44:230---  Compare XOR: ok
15:42:48:102---  Compare SUB: ok
15:42:51:973---  Compare MUL: ok
15:42:55:863---  Compare DIV: ok
15:42:59:736---  Compare OR: ok
15:43:03:603---  Compare AND: ok
15:43:06:187---  Sequential Increment: ok
15:45:43:992---  Solid Bits: ok
15:53:53:557---  Block Sequential: ok
15:55:55:904---  Checkerboard: ok
15:58:33:710---  Bit Spread: ok
16:09:04:552---  Bit Flip: ok
16:11:06:895---  Walking Ones: ok
16:13:09:239---  Walking Zeroes: ok
16:13:15:126---  8-bit Writes: ok
16:13:20:738---  16-bit Writes: ok

3. 总结

有比较过memtester 4.5.1与参考移植版本memtester 4.5.0 相关文件之间的区别

主要是printf函数的移植。
主要是注掉跨平台代码的判断。
去除一些flush exit等函数。
找到对应的main入口函数，重写mian函数，并增加相关的参数memtester_main。

希望对各位读者帮助。
欢迎订阅
“嵌入式实操”一个分享开发实践经验的地方。
文章会同时发布到我的 CSDN主页、今日头条号平台上。

嵌入式实操----基于RT1170 移植memtester做SDRAM测试（二十五）

本文主要是通过迁移的思维，记录本人初次使用NXP MCUXpresso SDK API进行BSP开发

1. 移植来源

2. 应用

3. 总结

猜你喜欢