ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:50:56:30:5E:3C
inet addr:192.24.168.93 Bcast:192.24.168.255 Mask:255.255.224.0
inet6 addr: fe80::250:56ff:fe30:5e3c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4782 errors:0 dropped:0 overruns:0 frame:0
TX packets:208 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:363198 (354.6 KiB) TX bytes:19942 (19.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)发现网卡不是eth0 了。。
start_udev 重新手动生成 70-persistent-net.rules
进去看了一下新生成的也默认指向eth1
cd /etc/sysconfig/network-scripts/
cp ifcfg-eth0 ifcfg-eth1 手动创建一个eth1 修改一下mac 地址。更改一下 DEVICE=eth1
重启一下网卡
service network restart 搞定。。