以太坊私链上面进行部署uniswap交易所（V2版本）

1、部署uniswap所需的智能合约：

（1） 工厂合约

工厂合约下面添加

    bytes32 public constant INIT_CODE_PAIR_HASH = keccak256(abi.encodePacked(type(UniswapV2Pair).creationCode)); 

（2）WETH9合约

（3）路由Router合约

（4）multicall合约如下

/**
 *Submitted for verification at Etherscan.io on 2019-11-14
*/

// hevm: flattened sources of /nix/store/im7ll7dx8gsw2da9k5xwbf8pbjfli2hc-multicall-df1e59d/src/Multicall.sol
pragma solidity >=0.5.0;
pragma experimental ABIEncoderV2;

// /nix/store/im7ll7dx8gsw2da9k5xwbf8pbjfli2hc-multicall-df1e59d/src/Multicall.sol
/* pragma solidity >=0.5.0; */
/* pragma experimental ABIEncoderV2; */

/// @title Multicall - Aggregate results from multiple read-only function calls
/// @author Michael Elliot <[email protected]>
/// @author Joshua Levine <[email protected]>
/// @author Nick Johnson <[email protected]>

contract Multicall {
    struct Call {
        address target;
        bytes callData;
    }
    function aggregate(Call[] memory calls) public returns (uint256 blockNumber, bytes[] memory returnData) {
        blockNumber = block.number;
        returnData = new bytes[](calls.length);
        for(uint256 i = 0; i < calls.length; i++) {
            (bool success, bytes memory ret) = calls[i].target.call(calls[i].callData);
            require(success);
            returnData[i] = ret;
        }
    }
    // Helper functions
    function getEthBalance(address addr) public view returns (uint256 balance) {
        balance = addr.balance;
    }
    function getBlockHash(uint256 blockNumber) public view returns (bytes32 blockHash) {
        blockHash = blockhash(blockNumber);
    }
    function getLastBlockHash() public view returns (bytes32 blockHash) {
        blockHash = blockhash(block.number - 1);
    }
    function getCurrentBlockTimestamp() public view returns (uint256 timestamp) {
        timestamp = block.timestamp;
    }
    function getCurrentBlockDifficulty() public view returns (uint256 difficulty) {
        difficulty = block.difficulty;
    }
    function getCurrentBlockGasLimit() public view returns (uint256 gaslimit) {
        gaslimit = block.gaslimit;
    }
    function getCurrentBlockCoinbase() public view returns (address coinbase) {
        coinbase = block.coinbase;
    }
}

 （5）发行代币合约（基于ERC20）

/**
 *Submitted for verification at Etherscan.io on 2017-09-23
*/

pragma solidity ^0.4.16;


/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
  function mul(uint256 a, uint256 b) internal constant returns (uint256) {
    uint256 c = a * b;
    assert(a == 0 || c / a == b);
    return c;
  }

  function div(uint256 a, uint256 b) internal constant returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return c;
  }

  function sub(uint256 a, uint256 b) internal constant returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  function add(uint256 a, uint256 b) internal constant returns (uint256) {
    uint256 c = a + b;
    assert(c >= a);
    return c;
  }
}


/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  uint256 public totalSupply;
  function balanceOf(address who) constant returns (uint256);
  function transfer(address to, uint256 value) returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender) constant returns (uint256);
  function transferFrom(address from, address to, uint256 value) returns (bool);
  function approve(address spender, uint256 value) returns (bool);
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC677 is ERC20 {
  function transferAndCall(address to, uint value, bytes data) returns (bool success);

  event Transfer(address indexed from, address indexed to, uint value, bytes data);
}

contract ERC677Receiver {
  function onTokenTransfer(address _sender, uint _value, bytes _data);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances. 
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) balances;

  /**
  * @dev transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) returns (bool) {
    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of. 
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) constant returns (uint256 balance) {
    return balances[_owner];
  }

}


/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value) returns (bool) {
    var _allowance = allowed[_from][msg.sender];

    // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
    // require (_value <= _allowance);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = _allowance.sub(_value);
    Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) returns (bool) {
    allowed[msg.sender][_spender] = _value;
    Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
    return allowed[_owner][_spender];
  }
  
    /*
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until 
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   */
  function increaseApproval (address _spender, uint _addedValue) 
    returns (bool success) {
    allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  function decreaseApproval (address _spender, uint _subtractedValue) 
    returns (bool success) {
    uint oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

contract ERC677Token is ERC677 {

  /**
  * @dev transfer token to a contract address with additional data if the recipient is a contact.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  * @param _data The extra data to be passed to the receiving contract.
  */
  function transferAndCall(address _to, uint _value, bytes _data)
    public
    returns (bool success)
  {
    super.transfer(_to, _value);
    Transfer(msg.sender, _to, _value, _data);
    if (isContract(_to)) {
      contractFallback(_to, _value, _data);
    }
    return true;
  }


  // PRIVATE

  function contractFallback(address _to, uint _value, bytes _data)
    private
  {
    ERC677Receiver receiver = ERC677Receiver(_to);
    receiver.onTokenTransfer(msg.sender, _value, _data);
  }

  function isContract(address _addr)
    private
    returns (bool hasCode)
  {
    uint length;
    assembly { length := extcodesize(_addr) }
    return length > 0;
  }

}

contract LinkToken is StandardToken, ERC677Token {

  uint public constant totalSupply = 10**27;
  string public constant name = 'HUB';
  uint8 public constant decimals = 18;
  string public constant symbol = 'HUB';

  function LinkToken()
    public
  {
    balances[msg.sender] = totalSupply;
  }

  /**
  * @dev transfer token to a specified address with additional data if the recipient is a contract.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  * @param _data The extra data to be passed to the receiving contract.
  */
  function transferAndCall(address _to, uint _value, bytes _data)
    public
    validRecipient(_to)
    returns (bool success)
  {
    return super.transferAndCall(_to, _value, _data);
  }

  /**
  * @dev transfer token to a specified address.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint _value)
    public
    validRecipient(_to)
    returns (bool success)
  {
    return super.transfer(_to, _value);
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value)
    public
    validRecipient(_spender)
    returns (bool)
  {
    return super.approve(_spender,  _value);
  }

  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value)
    public
    validRecipient(_to)
    returns (bool)
  {
    return super.transferFrom(_from, _to, _value);
  }


  // MODIFIERS

  modifier validRecipient(address _recipient) {
    require(_recipient != address(0) && _recipient != address(this));
    _;
  }

}

---

（二）、搭建私链的创世区块文件

完整部署uniswap 合约、前端教程（可部署uniswap到bsc、heco）_zgf1991的博客-CSDN博客_uniswap部署

在geth客户端进行

（1）geth --datadir data1 init genesis.json

（2）geth --datadir data1/ --networkid 20220726 --http --http.addr "0.0.0.0" --http.port 8541 --http.corsdomain "*" --http.vhosts "*" --port 30301 --http.api "eth,web3,miner,admin,personal,net" --nodiscover --ipcdisable --allow-insecure-unlock --syncmode "full" --maxpeers 100 console 2>geth.log

---

（三）、使用metamask进行与私链连接，进行如图配置。以上五种合约都用私链进行编译部署

 （四）、剩下可以参考文章

完整部署uniswap 合约、前端教程（可部署uniswap到bsc、heco）_zgf1991的博客-CSDN博客_uniswap部署

 补充：

1、在uniswap的前端进行修改，在src/state/swap/hooks.ts下

 2、在package.json下 修改name字段（我参考其他文章未修改）

3、在.env下添加

4、在node_module/@uniswap/sdk/dist/sdk.cjs.development.js下修改

443行WETH后面添加    WETH合约地址和私链的chainId对应的名称PRIVATE。

_WETH[exports.ChainId.PRIVATE] = /*#__PURE__*/new Token(exports.ChainId.PRIVATE, '0xf8889f57E6c4E3E907f3EFe9303c1898F0F1dFf3', 18, 'WETH', 'Wrapped Ether')

5、在node_modules/@uniswap/sdk/dist/sdk.esm.js下442行添加

_WETH[exports.ChainId.PRIVATE] = /*#__PURE__*/new Token(exports.ChainId.PRIVATE, '0xf8889f57E6c4E3E907f3EFe9303c1898F0F1dFf3', 18, 'WETH', 'Wrapped Ether')