SkeyeRTMPClient扩展支持HEVC(H.265)解决方案之HEVCDecoderConfigurationRecord结构详解

在上一篇 SkeyeRTMPClient拉取RTMP流扩展支持HEVC(H.265)解决方案中关于HEVCDecoderConfigurationRecord结构解析的讲解存在一些表述上不清楚的地方，本文为之续篇，重点对HEVC格式的MetaData结构的解析进行讲解。
在SkeyeRTMPPusher扩展支持H265的解决方案讲述时。我们对Metadata结构进行过详解，大家可以回顾一下这篇文章RTMP推送扩展支持HEVC(H265)之Metadata结构填写详解，重点来了，因为正常情况下，我们只需要从MetaData中取出对我们解码有用的数据头（即VPS,SPS和PPS），所以我们对HEVCDecoderConfigurationRecord填充的MetaData其他数据并不关心，但是，在解析时，我们需要对该结构所有数据都解析出来，以保证能准确无误的获取到我们所需要的数据头信息。

再次回顾HEVCDecoderConfigurationRecord结构：

typedef struct HEVCDecoderConfigurationRecord {
	uint8_t  configurationVersion;
	uint8_t  general_profile_space;
	uint8_t  general_tier_flag;
	uint8_t  general_profile_idc;
	uint32_t general_profile_compatibility_flags;
	uint64_t general_constraint_indicator_flags;
	uint8_t  general_level_idc;
	uint16_t min_spatial_segmentation_idc;
	uint8_t  parallelismType;
	uint8_t  chromaFormat;
	uint8_t  bitDepthLumaMinus8;
	uint8_t  bitDepthChromaMinus8;
	uint16_t avgFrameRate;
	uint8_t  constantFrameRate;
	uint8_t  numTemporalLayers;
	uint8_t  temporalIdNested;
	uint8_t  lengthSizeMinusOne;
	uint8_t  numOfArrays;
	HVCCNALUnitArray *array;
} HEVCDecoderConfigurationRecord;

而事实上，该结构如果直接填入到MetaData中是不正确的，我们看ffmpeg中hevc.c文件中的实现，该结构详细声明如下：

// The CodecPrivate syntax shall follow the
// syntax of HEVCDecoderConfigurationRecord
// defined in ISO/IEC 14496-15.
//
// The number zero (0) shall be written to
// the configurationVersion variable until
// official finalization of 14496-15, 3rd ed.
//
// After its finalization, this field and the
// following CodecPrivate structure shall
// follow the definition of the
// HEVCDecoderConfigurationRecord in 14496-15.

unsigned int(8)  configurationVersion;
unsigned int(2)  general_profile_space;
unsigned int(1)  general_tier_flag;
unsigned int(5)  general_profile_idc;
unsigned int(32) general_profile_compatibility_flags;
unsigned int(48) general_constraint_indicator_flags;
unsigned int(8)  general_level_idc;
bit(4) reserved = ‘1111’b;
unsigned int(12) min_spatial_segmentation_idc;
bit(6) reserved = ‘111111’b;
unsigned int(2)  parallelismType;
bit(6) reserved = ‘111111’b;
unsigned int(2)  chromaFormat;
bit(5) reserved = ‘11111’b;
unsigned int(3)  bitDepthLumaMinus8;
bit(5) reserved = ‘11111’b;
unsigned int(3)  bitDepthChromaMinus8;
bit(16) avgFrameRate;
bit(2)  constantFrameRate;
bit(3)  numTemporalLayers;
bit(1)  temporalIdNested;
unsigned int(2) lengthSizeMinusOne;
unsigned int(8) numOfArrays;
for (j=0; j < numOfArrays; j++) {
  bit(1) array_completeness;
  unsigned int(1)  reserved = 0;
  unsigned int(6)  NAL_unit_type;
  unsigned int(16) numNalus;
  for (i=0; i< numNalus; i++) {
    unsigned int(16) nalUnitLength;
    bit(8*nalUnitLength) nalUnit;
  }
}

从上代码段我们可以看出，以general_constraint_indicator_flags这个参数为例，结构体声明位宽64，而实际位宽是48，,所以结构体声明的参数位宽和实际位宽可能是不对等的，这就将导致解析MetaData时发生错位，从而解析发生错误，从而，我们从新认识HEVCDecoderConfigurationRecord，并声明其结构如下：

// RTMP扩展支持HEVC(H.265) [4/18/2019 SwordTwelve]
typedef struct  _Parser_HEVCDecoderConfigurationRecord {
	uint8_t  configurationVersion;
	uint8_t  general_profile_space:2;
	uint8_t  general_tier_flag:1;
	uint8_t  general_profile_idc:5;
	uint32_t general_profile_compatibility_flags;//6
	uint8_t general_constraint_indicator_flags[6];//12
	uint8_t  general_level_idc;
	uint8_t reserved1:4;// bit(4) reserved = ‘1111’b;
	uint8_t min_spatial_segmentation_idc_L:4;//12位之低4位
	uint8_t min_spatial_segmentation_idc_H;//12位之高8位
	uint8_t reserved2:6;//bit(6) reserved = ‘111111’b;
	uint8_t  parallelismType:2;
	uint8_t reserved3:6;//bit(6) reserved = ‘111111’b;
	uint8_t  chromaFormat:2;
	uint8_t reserved4:5;//bit(5) reserved = ‘11111’b;
	uint8_t  bitDepthLumaMinus8:3;
	uint8_t reserved5:5;//bit(5) reserved = ‘11111’b;
	uint8_t  bitDepthChromaMinus8:3;
	uint16_t avgFrameRate;
	uint8_t  constantFrameRate:2;
	uint8_t  numTemporalLayers:3;
	uint8_t  temporalIdNested:1;
	uint8_t  lengthSizeMinusOne:2;
	uint8_t  numOfArrays;
	//Parser_HVCCNALUnitArray *array;
} Parser_HEVCDecoderConfigurationRecord;

现在位宽已经对齐，我们可以直接从MetaData里面讲该结构拷贝出来，从而获取到正确的参数和值，如下代码所示：

		Parser_HEVCDecoderConfigurationRecord *decoder_header = (Parser_HEVCDecoderConfigurationRecord*)((char*)parser_config);
		parser_offset += sizeof(Parser_HEVCDecoderConfigurationRecord);
		int nNumOfArrays = decoder_header->numOfArrays;
		for (int i=0; i<nNumOfArrays; i++)
		{
			......
		}

同理，我们从MetaData中拷贝出nal单元数据头也是需要考虑这个问题，这里我们声明Parser_HVCCNALUnitArray结构如下：

// RTMP扩展支持HEVC(H.265) [4/18/2019 SwordTwlve]
typedef struct _Parser_HVCCNALUnitArray {
	uint8_t  NAL_unit_type;
//	uint16_t numNalus;
// 	uint16_t *nalUnitLength;
// 	uint8_t  **nalUnit;
} Parser_HVCCNALUnitArray;

如上代码所示，为了保证字节对齐，我们只保留NAL_unit_type参数，通过字节拷贝运行，计算出nalu的数量numNalus，然后再从nalunit数组中取得我们需要的头信息。

	Parser_HVCCNALUnitArray* pNALUnit = (Parser_HVCCNALUnitArray*)((char *)parser_config+parser_offset);
	parser_offset += sizeof(Parser_HVCCNALUnitArray);
	int numNalus = ntohs(*(unsigned short *)((char *)parser_config + parser_offset));  
	parser_offset += 2;
	for (int nI=0; nI<numNalus; nI++)
	{
		......
	}

欢迎大家下载SkeyePlayer测试播放支持H265的RTMP流：
https://gitee.com/visual-opening/skeyplayer
https://gitee.com/visual-opening/skeyeexspeedplayer

有任何技术问题，欢迎大家和我进行技术交流：
[email protected]

大家也可以加入EasyPlayer流媒体播放器 QQ群进行讨论：
102644504

SkeyeRTMPClient扩展支持HEVC(H.265)解决方案之HEVCDecoderConfigurationRecord结构详解

猜你喜欢