[root]# fdisk /dev/hdb
Command (m for help): m (Enter the letter "m" to get list of commands)
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
e
Partition number (1-4): 1
First cylinder (1-2654, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-2654, default 2654):
Using default value 2654
Command (m for help): p
Disk /dev/hdb: 240 heads, 63 sectors, 2654 cylinders
Units = cylinders of 15120 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 2654 20064208+ 5 Extended
Command (m for help): w (Write and save partition table)
[root]# mkfs -t ext3 /dev/hdb1
mke2fs 1.27 (8-Mar-2002)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
2508352 inodes, 5016052 blocks
250802 blocks (5.00%) reserved for the super user
First data block=0
154 block groups
32768 blocks per group, 32768 fragments per group
16288 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root]# mkdir /opt2
[root]# mount -t ext3 /dev/hdb1 /opt2
----------------------------------
date +%Y%m%d -s "20110822"
date +%T -s "09:32:30"
yum -y install build-essential m4 libncurses5-dev libssh-dev unixodbc-dev libgmp3-dev libwxgtk2.8-dev libglu1-mesa-dev fop xsltproc default-jdk
tar -xvzf otp_src_R14B03.tar.gz -C /software/erlang/
cd /software/erlang
chmod -R 777 otp_src_R14B03
cd otp_src_R14B03
./configure \
--prefix=/usr/local/erlang \
--enable-hipe \
--enable-threads \
--enable-smp-support \
--enable-kernel-poll
make
make install
sudo yum -y install make gcc gcc-c++ kernel-devel m4 ncurses-devel openssl-devel