SPL-投稿要求

1 摘要

摘要是通常在100-175个单词之间

2 关键词

术语按字母顺序输入关键字或短语顺序,用逗号分隔

3 页数说明

IEEE信号处理信件只允许四页的文章。

第五页只允许“参考资料”,尽管“参考资料”可以在第五页之前开始。

信号处理信件中不允许使用作者传记或照片。请查看IEEE信号处理信函的作者信息:

4 图形要求

以下列表概述了IEEE信号处理快报中发布的不同类型的图形。根据它们的构造和颜色/灰度的使用对它们进行分类:

1) 彩色/灰度图形:以彩色或黑色/灰色阴影显示的图形。这些图可以包括照片、插图、多色图和流程图。

2) 线条艺术图形:仅由黑色线条和形状组成的图形。这些数字应该没有灰色的阴影或半色调,只有黑色和白色。

These figures should have no shades or halftones of gray, only black and white.

3) 图形要求

表格:数据图表,通常是黑白的,但有时包括颜色

B.多部分图形

由多个子图形并排或堆叠而成的图形。如果一个多部分图形由多个图形类型组成(一部分是线性部分,另一部分是灰度或彩色),则该图形应满足更严格的要求指导方针。

C.图形文件格式

使用合适的图形处理程序格式化并保存图形,该程序允许您将图像创建为PostScript(PS)、封装的PostScript(.EPS)、标记的图像文件格式(.TIFF)、可移植文档格式(.PDF)可移植网络图形(.PNG)或Metapost(.MPS),调整其大小并调整分辨率设置。当提交你的期末论文时,你的图片应该和手稿一起以这些格式中的一种单独提交

D.图形大小调整

大多数图表、图表和表格都是一栏宽(3.5英寸/88毫米/21 picas)或页面宽(7.16英寸/181毫米/43 picas)。图形的最大深度为8.5英寸(216毫米/54皮卡)。选择图形的深度时,请为标题caption留出空间。
如果作者选择,Figures的大小可以在列宽和页宽之间调整但是建议Figures的大小不能小于列宽,除非必要。

图1.磁化强度与外加磁场的关系。注意,“Fig.”是缩写。数字后面有一个句点,后跟两个空格解释标题中数字的意义是一种很好的做法。

E 像素

图形的正确分辨率取决于“图形类型”部分中定义的图形类型。
作者的照片,颜色和灰度数字应至少为300dpi
折线图Line art, including tables(包括表格)至少应为600dpi

F 矢量艺术

为了保持数字的完整性

在计算机平台上,我们接受以下格式的文件:

.EPS/.PDF/.PS。所有字体必须嵌入或文本转换

为了达到最好的质量效果而勾勒轮廓。

G 图形中接受的字体

在准备图形时,IEEE建议您使用以下开放式字体之一:Times New Roman,Helvetica、Arial、Cambria和Symbol。
如果你提供EPS、PS或PDF文件必须嵌入所有字体。一些字体可能只是您的操作系统固有的;没有字体嵌入时,图形的某些部分可能会扭曲或丢失。
最后确定数字时,一个安全的选择是去掉字体,然后再保存文件,创建“大纲”类型。
这个将字体转换为将统一显示在任何屏幕。

2) 多部分图形和表格中的子图形标签:多部分图形应在最终提交前进行组合和标记。
标签应以(a)(b)(c)格式的8点(8 point)Times New Roman字体显示在每个子图形下方的中心位置

一 文件命名

Figures(line artwork or photographs)的命名应从作者姓氏的前5个字母开始。
The next characters in the filename should be the number that represents the sequential location of this image in your article.
文件名中的下一个字符应该是表示此图像在文章中的顺序位置的数字。
例如,在作者“Anderson”的论文中,前三个数字将被命名为ander1.tif、ander2.tif和ander3.ps。(zhu1.pdf)
表格应该只包含表格的主体(而不是标题),并且应该以类似于图的方式命名,除了“.t”插入在作者姓名和表格编号之间。
例如,作者Anderson的前三个表将命名为ander.t1.tif、ander.t2.ps和ander.t3.eps。

J 在论文中引用图形或表格
在论文中引用图表时,即使在句首也要使用缩写“Fig.”
不要缩写“表格”。
表格应该用罗马数字编号

K 检查你的数字:

IEEE图形分析器IEEE图形分析器允许作者在提交之前预先筛选他们的图形是否符合IEEE交易和期刊标准。
在线工具,位于http://graphicsqc.ieee.org/,允许作者上载

以检查每个图形文件的格式、分辨率、大小和颜色空间是否正确;
没有字体丢失或损坏;数字不分层编译,也不具有透明度,它们是根据IEEE事务和期刊命名约定命名的。
在这个自动化过程的最后,作者可以通过电子邮件获得关于webapplet中每个图形的详细报告。
有关使用图形分析器或任何其他图形相关主题的更多信息,请通过电子邮件联系IEEE图形帮助台[email protected].

L 提交图形

因为IEEE将完成论文的最终格式,所以不需要将图形和表格放置在每一列的顶部和底部
事实上,所有的数字、图形标题和表格都可以放在论文的末尾
除了,甚至代替在你的最终手稿中提交figures,
figures应单独提交,与第三节C节所列文件格式之一的手稿分开。
在图形下方放置图形标题;将表格标题放在表格上方。
请不要将标题作为图片的一部分,也不要将它们放在与图片链接的“文本框”中。
另外,不要在你的外形周围加边框。

M。IEEE期刊中的彩色处理/打印所有IEEE交易、期刊和信件允许作者在IEEE Xplore R上发布彩色图形?
免费,并自动转换为灰度打印版本。在大多数期刊中,图表可以交替印刷如果作者愿意的话。
请注意,这项服务是在一个额外的费用,作者。
如果您打算打印彩色图形,请在期末报告中附上说明,说明您希望以这种方式处理哪些图形或表格,并说明您愿意支付费用额外费用。

结论

A conclusion section is not required. Although a conclusion
may review the main points of the paper, do not replicate the
abstract as the conclusion. A conclusion might elaborate on the
importance of the work or suggest applications and extensions.

不需要结论部分。
虽然结论可以回顾论文的要点,但不要把摘要作为结论来重复。
结论可能会详细说明工作的重要性,或者提出应用扩展的建议

引用

References need not be cited in text.
When they are, they appear on the line, in square brackets, inside the punctuation
Multiple references are each numbered with separate brackets. When citing a section in a book, please give the relevant page numbers. In text, refer simply to the reference number. Do not use ``Ref.'' or ``reference'' except at the beginning of a sentence: ``Reference [3] shows . . . .'' Please do not use automatic endnotes in {\em Word}, rather, type the reference list at the end of the paper using the ``References'' style.

Reference numbers are set flush left and form a column of their own, hanging out beyond the body of the reference. The reference numbers are on the line, enclosed in square brackets. In all references, the given name of the author or editor is abbreviated to the initial only and precedes the last name. Use them all; use {\em et al.} only if names are not given. Use commas around Jr., Sr., and III in names. Abbreviate conference titles.  When citing IEEE transactions, provide the issue number, page range, volume number, year, and/or month if available. When referencing a patent, provide the day and the month of issue, or application. References may not include all information; please obtain and include relevant information. Do not combine references. There must be only one reference with each number. If there is a URL included with the print reference, it can be included at the end of the reference.

Other than books, capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation. See the end of this document for formats and examples of common references. For a complete discussion of references and their formats, see the IEEE style manual at www.ieee.org/authortools.

参考文献不必在正文中引用。
如果是,它们会出现在标点符号内的方括号内的行上
多个引用都用单独的括号编号。引用书中某一章节时,请给出相关页码。
在文本中,仅参考参考号。除句首外,不要使用“Ref.”或“reference”:“reference[3]表示……”请不要在{\em Word}中使用自动尾注,而是使用“References”样式在文章末尾键入引用列表。

参考号设置为左对齐,并形成自己的列,悬挂在参考主体之外。
参考号在这一行,用方括号括起来。在所有参考文献中,
作者或编辑的名字仅缩写为首字母,并在姓氏之前
全部使用;仅当没有给出名称时才使用{\em et al.}。名字中的Jr.,Sr.,和III用逗号。
缩写会议标题。引用IEEE事务时,请提供问题编号、页面范围、卷号、年份和/或月份(如果可用)。
引用专利时,请提供发布或申请的日期和月份。
参考资料可能不包括所有信息;请获取并包括相关信息。
不要合并引用。每个数字只能有一个引用。
如果打印引用中包含URL,则可以将其包含在引用的末尾。
除书籍外,除专有名词和元素符号外,仅大写纸张标题中的第一个单词。在翻译期刊上发表的论文,请先给出英文引文,再给出原文外文引文。有关常用参考文献的格式和示例,请参见本文档末尾。有关参考文件及其格式的完整讨论,请参阅www.ieee.org/authortools.

Number footnotes separately in superscripts (Insert $\mid$ Footnote).\footnote{It is recommended that footnotes be avoided (except for the unnumbered footnote with the receipt date on the first page).
Instead, try to integrate the footnote information into the text.}  Place the actual footnote at the bottom of the column in which it is cited; do not put footnotes in the reference list (endnotes). Use letters for table footnotes (see Table I).
在上标中分别为脚注编号(插入$\mid$脚注)。\Footnote{建议避免使用脚注(第一页上有接收日期的未编号脚注除外)。
相反,尝试将脚注信息整合到文本中。}将实际的脚注放在引用它的列的底部;不要在参考列表(尾注)中添加脚注。表格脚注使用字母(见表一)。

Basic format for periodicals: (期刊基本格式)(SPL这个格式真奇怪
J. K. Author, ``Name of paper,'' Abbrev. Title of Periodical, vol. x,   no. x, pp. xxx--xxx, Abbrev. Month, year, DOI. 10.1109.XXX.123--456.

例子
\begin{thebibliography}{34}
\setcounter{enumiv}{2}

\bibitem{}J. U. Duncombe, ``Infrared navigation Part I: An assessment of feasibility,'' {\em IEEE Trans. Electron Devices}, vol. ED-11, no. 1, pp. 34--39, Jan. 1959,10.1109/TED.2016.2628402.

\bibitem{}E. P. Wigner, ``Theory of traveling-wave optical laser,''
{\em Phys. Rev.},  vol. 134, pp. A635--A646, Dec. 1965.

\bibitem{}E. H. Miller, ``A note on reflector arrays,'' {\em IEEE Trans. Antennas Propagat.}, to be published.
\end{thebibliography}

猜你喜欢

转载自blog.csdn.net/zjc910997316/article/details/117410594