Sun服务器Solaris10安装步骤 (六)

确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；

- Root Password ------------------------------------------------------
  Please enter the root password for this system.

  The root password may contain alphanumeric and special characters.  For
  security, the password will not be displayed on the screen as you type it.

  > If you do not want a root password, leave both entries blank.


    Root password:  *****
    Root password:  *****
----------------------------------------------------------------------
    Esc-2_Continue    Esc-6_Help
设置root用户密码。本例中，设置为admin。按F2键继续安装；

- Identify This System -----------------------------------------------
  On the next screens, you must identify this system as networked or
  non-networked, and set the default time zone and date/time.

  If this system is networked, the software will try to find the information
  it needs to identify your system; you will be prompted to supply any
  information it cannot find.

  > To begin identifying this system, press F2.
----------------------------------------------------------------------
    F2_Continue    F6_Help
系统鉴别系统信息不用管进行下一步开始安装，按F2键继续安装；

- Solaris Interactive Installation -----------------------------------
  On the following screens, you can accept the defaults or you can customize
  how Solaris software will be installed by:

        - Selecting the type of Solaris software to install
        - Selecting disks to hold software you've selected
        - Selecting unbundled products to be installed with Solaris
        - Specifying how file systems are laid out on the disks

  After completing these tasks, a summary of your selections (called a
  profile) will be displayed.

  There are two ways to install your Solaris software:

   - "Standard" installs your system from a standard Solaris Distribution.
      Selecting "Standard" allows you to choose between initial install
      and upgrade, if your system is upgradable.
   - "Flash" installs your system from one or more Flash Archives
---------------------------------------------------------------------
     F2_Standard    F4_Flash    F5_Exit    F6_Help

- Eject a CD/DVD Automatically? --------------------------------------

  During the installation of Solaris software, you may be using one or more
  CDs/DVDs. You can choose to have the system eject each CD/DVD automatically
  after it is installed or you can choose to manually eject each CD/DVD.


            [ ] Automatically eject CD/DVD
            [X] Manually eject CD/DVD
----------------------------------------------------------------------
     F2_Continue    F3_Go Back    F5_Exit

- Reboot After Installation? -----------------------------------------
  After Solaris software is installed, the system must be rebooted. You can
  choose to have the system automatically reboot, or you can choose to
  manually reboot the system if you want to run scripts or do other
  customizations before the reboot.  You can manually reboot a system by using
  the reboot(1M) command.


            [X] Auto Reboot
            [ ] Manual Reboot
----------------------------------------------------------------------
     F2_Continue    F3_Go Back    F5_Exit

- Solaris Interactive Installation ---------------------------------------------

  This system is upgradable, so there are two ways to install the Solaris
  software.

  The Upgrade option updates the Solaris software to the new release, saving
  as many modifications to the previous version of Solaris software as
  possible.  Back up the system before using the Upgrade option.

  The Initial option overwrites the system disks with the new version of
  Solaris software.  This option allows you to preserve any existing file
  systems.  Back up any modifications made to the previous version of Solaris
  software before starting the Initial option.

  After you select an option and complete the tasks that follow, a summary of
  your actions will be displayed.