核心参考 xiph官网
ogg 数据结构
| datatype | purpose |
|---|---|
| ogg_page | This structure encapsulates data into one ogg bitstream page. 编码时page的信息在此输出 |
| ogg_stream_state | This structure contains current encode/decode data for a logical bitstream. 代表当前流 |
| ogg_packet | This structure encapsulates the data and metadata for a single Ogg packet. 编码时数据输入的结构包 |
| ogg_sync_state | Contains bitstream synchronization information. |
以上ogg中最大的结构为ogg流，对比ogg的存储结构来说都是以ogg_page来进行数据分页，但是对于用于来说是以ogg_packet来对数据进行装载和解析。
编码相关
概览
When encoding, the encoding engine will output raw packets which must be placed into an Ogg bitstream. Raw packets are inserted into the stream, and an ogg_page is output when enough packets have been written to create a full page. The pages output are pointers to buffered packet segments, and can then be written out and saved as an ogg stream. There are a couple of basic steps: Use the encoding engine to produce a raw packet of data. Call ogg_stream_packetin to submit a raw packet to the stream. Use ogg_stream_pageout to output a page, if enough data has been submitted. Otherwise, continue submitting data.
意思就是原始数据要封装在ogg_packet中通过ogg_stream_packetin方法写入到ogg_stream_state中，如果包足够通过ogg_stream_pageout方法将数据写在ogg_page中
| function | purpose |
|---|---|
| ogg_stream_packetin | Submits a raw packet to the streaming layer, so that it can be formed into a page. |
| ogg_stream_iovecin | iovec version of ogg_stream_packetin() above. |
| ogg_stream_pageout | Outputs a completed page if the stream contains enough packets to form a full page. 返回值非0代码输出成功 |
| ogg_stream_pageout_fill | Similar to ogg_stream_pageout(), but specifies a page spill threshold in bytes. |
| ogg_stream_flush | Forces any remaining packets in the stream to be returned as a page of any size. |
| ogg_stream_flush_fill | Similar to ogg_stream_flush(), but specifies a page spill threshold in bytes. |
创建与销毁
创建
ogg_stream_init(&stream_, 0 /* serial number */);
销毁
ogg_stream_clear(&stream_);
编码数据封装
typedef struct {
unsigned char *packet;//数据
long bytes;//数据大小
long b_o_s;//1代表开始包
long e_o_s;//1代表结束包
//A number indicating the position of this packet in the decoded data. This is the last sample, frame or other unit of information ('granule') that can be completely decoded from this packet.
ogg_int64_t granulepos;
ogg_int64_t packetno;//Sequential number of this packet in the ogg bitstream.
} ogg_packet;
单流数据写入
// Write the most recent buffer of Opus data into an Ogg packet.
ogg_packet frame_packet;
frame_packet.b_o_s = 0;
frame_packet.e_o_s = flush ? 1 : 0;
// According to
// https://tools.ietf.org/html/draft-ietf-codec-oggopus-14#section-4 the
// granule position should include all samples up to the last packet completed
// on the page, so we need to update granule_position_ before assigning it to
// the packet. If we're closing the stream, we don't assume that the last
// packet includes a full frame.
if (flush) {
granule_position_ += (elements_in_pcm_frame_ / num_channels_);
} else {
granule_position_ += frame_size_;
}
frame_packet.granulepos = granule_position_;
frame_packet.packetno = packet_count_;
frame_packet.packet = opus_frame_bytes;
frame_packet.bytes = opus_bytes_length;
// Add the data packet into the stream.
packet_count_++;
ogg_stream_packetin(&stream_, &frame_packet);
获取输出数据
void OggOpusEncoder::AppendOggStateToBuffer(std::vector<unsigned char>* buffer,
bool flush_ogg_stream) {
int (*write_fun)(ogg_stream_state*, ogg_page*) =
flush_ogg_stream ? &ogg_stream_flush : &ogg_stream_pageout;
while (write_fun(&stream_, &page_) != 0) {
const int initial_size = buffer->size();
buffer->resize(buffer->size() + page_.header_len + page_.body_len);
memcpy(buffer->data() + initial_size, page_.header, page_.header_len);
memcpy(buffer->data() + initial_size + page_.header_len, page_.body,
page_.body_len);
}
}
解码相关
基本方法
| 函数 | 用途 |
|---|---|
| ogg_sync_pageseek | Finds the borders of pages and resynchronizes the stream. -n means that we skipped n bytes within the bitstream.0 means that the page isn’t ready and we need more data, or than an internal error occurred. No bytes have been skipped. n means that the page was synced at the current location, with a page length of n bytes. |
| ogg_sync_buffer | Exposes a buffer from the synchronization layer in order to read data. 返回缓冲区引入，为下一步数据输入做准备 |
| ogg_sync_wrote | Tells the synchronization layer how many bytes were written into the buffer. 同步已经写入了多少数据 |
| ogg_stream_pagein | Submits a complete page to the stream layer. 把page的信息提交到流处理层 |
| ogg_stream_packetout | Outputs a packet to the codec-specific decoding engine. 取出packet信息，可进行原始数据处理 |
创建与销毁
创建
ogg_sync_state ogsync; ogg_sync_init(&ogsync);
销毁
ogg_sync_clear
遍历处理数据
处理结构
ogg_sync_init(&ogsync);
while(get_next_page(file, &ogsync, &page, &written)) {
...
p->process_page(p, &page);
...
}
ogg_sync_clear(&ogsync)
写数据到同步器
while((ret = ogg_sync_pageseek(ogsync, page)) <= 0) {
if(ret < 0) {
/* unsynced, we jump over bytes to a possible capture - we don't need to read more just yet */
oi_warn(_("WARNING: Hole in data (%d bytes) found at approximate offset %" I64FORMAT " bytes. Corrupted Ogg.\n"), -ret, *written);
continue;
}
/* zero return, we didn't have enough data to find a whole page, read */
buffer = ogg_sync_buffer(ogsync, CHUNK);
bytes = fread(buffer, 1, CHUNK, f);
if(bytes <= 0) {
ogg_sync_wrote(ogsync, 0);
return 0;
}
ogg_sync_wrote(ogsync, bytes);
*written += bytes;
}
文件头处理示例
//初始化流
ogg_stream_init(&stream->os, serial);
//ogg_stream_init
ogg_stream_pagein(&stream->os, page);
res = ogg_stream_packetout(&stream->os, &packet);
if(res <= 0) {
oi_warn(_("WARNING: Invalid header page, no packet found\n"));
null_start(stream);
}
else if(packet.bytes >= 19 && memcmp(packet.packet, "OpusHead", 8)==0)
...
/* re-init, ready for processing */
ogg_stream_clear(&stream->os);
ogg_stream_init(&stream->os, serial);
//此处是为了下次重新解析头
音频数据解析
音频数据的解析根据ogg格式也是每个page进行解析
