LVS-DR：实现VIP和RIP不在同一个网络中的集群

其他 2020-07-26 23:35:04 阅读次数: 0

LVS-DR：实现VIP和RIP不在同一个网络中集群

环境说明:

client和router的eth1在一个内网中，clinet的网关指向172.25.16.100

DR,RS-1,RS-2三台服务器分别配置了对应的本地静态地址DIP和RIP，且在一个内网中。网关都指向router上的eth0

1. router上配置ip转发,并测试

[root@router ~]# sysctl -p
net.ipv4.ip_forward = 1

#测试client和rs1,rs2能否互通
[root@client ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:ba:e5:07 brd ff:ff:ff:ff:ff:ff
    inet 172.25.16.10/16 brd 172.25.255.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::b181:319:54a:2d3c/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
[root@client ~]# ping 192.168.32.135
PING 192.168.32.135 (192.168.32.135) 56(84) bytes of data.
64 bytes from 192.168.32.135: icmp_seq=1 ttl=63 time=0.613 ms
64 bytes from 192.168.32.135: icmp_seq=2 ttl=63 time=0.632 ms
64 bytes from 192.168.32.135: icmp_seq=3 ttl=63 time=0.669 ms
^C
--- 192.168.32.135 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.613/0.638/0.669/0.023 ms
[root@client ~]# ping 192.168.32.140
PING 192.168.32.140 (192.168.32.140) 56(84) bytes of data.
64 bytes from 192.168.32.140: icmp_seq=1 ttl=63 time=0.615 ms
64 bytes from 192.168.32.140: icmp_seq=2 ttl=63 time=0.565 ms
64 bytes from 192.168.32.140: icmp_seq=3 ttl=63 time=0.442 ms
^C
--- 192.168.32.140 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.442/0.540/0.615/0.077 ms

#ttl值为63，确实经过了一个路由
[root@rs-1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:26:1e:fc brd ff:ff:ff:ff:ff:ff
    inet 192.168.32.135/24 brd 192.168.32.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe26:1efc/64 scope link 
       valid_lft forever preferred_lft forever
[root@rs-1 ~]# ping 172.25.16.10
PING 172.25.16.10 (172.25.16.10) 56(84) bytes of data.
64 bytes from 172.25.16.10: icmp_seq=1 ttl=63 time=0.484 ms
64 bytes from 172.25.16.10: icmp_seq=2 ttl=63 time=0.534 ms
^C
--- 172.25.16.10 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.484/0.509/0.534/0.025 ms


[root@rs-2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:89:35:d0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.32.140/24 brd 192.168.32.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::3fac:e9cd:2f45:12ec/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
[root@rs-2 ~]# ping 172.25.16.10
PING 172.25.16.10 (172.25.16.10) 56(84) bytes of data.
64 bytes from 172.25.16.10: icmp_seq=1 ttl=63 time=0.401 ms
64 bytes from 172.25.16.10: icmp_seq=2 ttl=63 time=0.354 ms
64 bytes from 172.25.16.10: icmp_seq=3 ttl=63 time=0.683 ms
64 bytes from 172.25.16.10: icmp_seq=4 ttl=63 time=0.499 ms
^C
--- 172.25.16.10 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.354/0.484/0.683/0.127 ms

2. DR上配置VIP和转发规则

#配置VIP,也可以配在环回口上
[root@dr ~]# ip addr add 192.168.64.100/32 dev ens33
[root@dr ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:d7:d9:41 brd ff:ff:ff:ff:ff:ff
    inet 192.168.32.130/24 brd 192.168.32.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet 192.168.64.200/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fed7:d941/64 scope link 
       valid_lft forever preferred_lft forever
[root@dr ~]# route add -host 192.168.64.100/32 dev ens33

[root@dr ~]# yum -y install ipvsadm
#dr模式不支持端口映射，所以直接写IP
[root@dr ~]# ipvsadm -A -t 192.168.64.100:80 -s rr
[root@dr ~]# ipvsadm -a -t 192.168.64.100:80 -r 192.168.32.135 -g
[root@dr ~]# ipvsadm -a -t 192.168.64.100:80 -r 192.168.32.140 -g
[root@dr ~]# ipvsadm -Sn
-A -t 192.168.64.100:80 -s rr
-a -t 192.168.64.100:80 -r 192.168.32.135:80 -g -w 1
-a -t 192.168.64.100:80 -r 192.168.32.140:80 -g -w 1

3. RS上配置arp内核参数和VIP

[root@rs-1 ~]# vim /etc/sysctl.conf 
[root@rs-1 ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

[root@rs-2 ~]# vim /etc/sysctl.conf
[root@rs-2 ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

[root@rs-1 ~]# ip addr add 192.168.64.100/32 dev lo
[root@rs-1 ~]# route add -host 192.168.64.100/32 dev lo

[root@rs-2 ~]# ip addr add 192.168.64.100/32 dev lo
[root@rs-2 ~]# route add -host 192.168.64.100/32 dev lo

4. 配置HTTP访问

[root@RS-1 ~]# yum -y install httpd
[root@RS-1 ~]# echo 'this is RS-1' > /var/www/html/index.html
[root@RS-1 ~]# systemctl start httpd
[root@rs-1 ~]# ss -tanl
State       Recv-Q Send-Q                  Local Address:Port                                 Peer Address:Port              
LISTEN      0      100                         127.0.0.1:25                                              *:*                  
LISTEN      0      128                                 *:80                                              *:*                  
LISTEN      0      128                                 *:22                                              *:*                  
LISTEN      0      100                             [::1]:25                                           [::]:*                  
LISTEN      0      128                              [::]:22                                           [::]:*     

[root@RS-2 ~]# yum -y install httpd
[root@rs-2 ~]# echo 'this is RS-2' > /var/www/html/index.html
[root@RS-2 ~]# systemctl start httpd
[root@rs-2 ~]# ss -tanl
State       Recv-Q Send-Q                  Local Address:Port                                 Peer Address:Port              
LISTEN      0      100                         127.0.0.1:25                                              *:*                  
LISTEN      0      128                                 *:22                                              *:*                  
LISTEN      0      100                             [::1]:25                                           [::]:*                  
LISTEN      0      128                              [::]:80                                           [::]:*                  
LISTEN      0      128                              [::]:22                                           [::]:*

5. 客户端访问测试

[root@client ~]# for i in $(seq 10);do curl 192.168.64.100:80;done
this is RS-1
this is RS-2
this is RS-1
this is RS-2
this is RS-1
this is RS-2
this is RS-1
this is RS-2
this is RS-1
this is RS-2

猜你喜欢

转载自www.cnblogs.com/shipment/p/13382845.html
今日推荐
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
LFOSSA 源来如此公开课 | 掌握云原生未来：CNCF 认证全面攻略与备考秘籍
国产云输入法——仅华为无云端数据上传安全问题
周排行
Python环境安装与基础语法（1）——计算机基础知识
IMU预积分
ADAS中的LDW、FCW、BSD、LCA、ACC、AEB、APA、DMS代表的含义
B站笔试两道题
skyeye arm 硬件虚拟机环境的搭建
Web前端静态页面示例
数组-合并排序数组 II-简单
springcloud之版本问题启动报错
面向对象-------------匿名对象(六)
输入URL到页面呈现中间发生了什么？
每日归档
更多
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)
2024-04-23(26)
2024-04-22(39)
2024-04-21(0)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022