交换机的配置
交换机LSW1配置
[Huawei]vlan 152
[Huawei-vlan152]vlan 34
//将几个接口模式配置
[Huawei-vlan34]int g0/0/3
[Huawei-GigabitEthernet0/0/3]po l t
[Huawei-GigabitEthernet0/0/3]po t all vl all
[Huawei-GigabitEthernet0/0/3]int g0/0/4
[Huawei-GigabitEthernet0/0/4]po l t
[Huawei-GigabitEthernet0/0/4]po t all vl all
//为VALN152与VLAN34配置网关地址
[Huawei-GigabitEthernet0/0/4]int vlan 152
[Huawei-Vlanif152]ip add 192.168.152.10 24
[Huawei-Vlanif152]int vlan 34
[Huawei-Vlanif34]ip add 192.168.34.10 24
//将路由器与交换机连接的两个接口配置为access模式，在默认情况下交换机的接口处于VLAN1，所以我们给VLAN1配置网关地址
[Huawei-Vlanif34]int g0/0/1
[Huawei-GigabitEthernet0/0/1]po l a
[Huawei-GigabitEthernet0/0/1]po d vl 1
[Huawei-GigabitEthernet0/0/1]int g0/0/2
[Huawei-GigabitEthernet0/0/2]po l a
[Huawei-GigabitEthernet0/0/2]po d vl 1
[Huawei]int vlan 1
[Huawei-Vlanif1]ip add 192.168.12.10 24
//配置ospf
[Huawei]ospf 1
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net 192.168.152.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]net 192.168.34.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]net 192.168.12.0 0.0.0.255
交换机LSW2配置
[Huawei]vlan 152
[Huawei-vlan152]vlan 34
[Huawei-vlan34]int g0/0/2
[Huawei-GigabitEthernet0/0/2]po l a
[Huawei-GigabitEthernet0/0/2]po d v 152
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]po l a
[Huawei-GigabitEthernet0/0/3]po d vl 152
[Huawei-GigabitEthernet0/0/3]int g0/0/4
[Huawei-GigabitEthernet0/0/4]po l a
[Huawei-GigabitEthernet0/0/4]po d v 34
[Huawei-GigabitEthernet0/0/4]int g0/0/1
[Huawei-GigabitEthernet0/0/1]po l t
[Huawei-GigabitEthernet0/0/1]po tr all vl a
交换机LSW3配置
[Huawei]vlan 152
[Huawei-vlan152]vlan 34
[Huawei-vlan34]int g0/0/2
[Huawei-GigabitEthernet0/0/2]po l a
[Huawei-GigabitEthernet0/0/2]po d vl 152
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]po l a
[Huawei-GigabitEthernet0/0/3]po d vl 34
[Huawei-GigabitEthernet0/0/3]int g0/0/1
[Huawei-GigabitEthernet0/0/1]po l t
[Huawei-GigabitEthernet0/0/1]po tr all vl all
路由器配置
R1路由器
[Huawei]int e0/0/0
[Huawei-Ethernet0/0/0]ip add 192.168.12.1 24
[Huawei-Ethernet0/0/0]q
//ospf配置
[Huawei]ospf 1
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net 192.168.12.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]q
//远程为R3的e0/0/1接口下划分DHCP
[Huawei]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[Huawei]ip pool R1_
Info:It's successful to create an IP address pool.
[Huawei-ip-pool-R1_]net 192.168.3.0 mask 255.255.255.0
[Huawei-ip-pool-R1_]gateway 192.168.3.3
[Huawei-ip-pool-R1_]dns-list 192.168.2.1
[Huawei-ip-pool-R1_]int e0/0/0
[Huawei-Ethernet0/0/0]dhcp select global
[Huawei-Ethernet0/0/0]q
//Telnet配置
[Huawei]telnet server enable
Info: The Telnet server has been enabled.
[Huawei]aaa
[Huawei-aaa]local-user zz password cipher zz123
Info: Add a new user.
[Huawei-aaa]user-interface vty 0 4
[Huawei-ui-vty0-4]authentication-mode aaa
R2路由器
[Huawei]int e0/0/0
[Huawei-Ethernet0/0/0]ip add 192.168.12.2 24
[Huawei-Ethernet0/0/0]int e0/0/1
[Huawei-Ethernet0/0/1]ip add 192.168.23.2 24
[Huawei-Ethernet0/0/1]int g0/0/0
[Huawei-GigabitEthernet0/0/0]ip add 192.168.2.10 24
[Huawei-GigabitEthernet0/0/0]q
//ospf
[Huawei]ospf 1
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net 192.168.12.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]net 192.168.23.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]net 192.168.2.0 0.0.0.255
R3路由器
[Huawei]int e0/0/0
[Huawei-Ethernet0/0/0]ip add 192.168.23.3 24
[Huawei-Ethernet0/0/0]int e0/0/1
[Huawei-Ethernet0/0/1]ip add 192.168.3.3 24
[Huawei-Ethernet0/0/1]q
//ospf
[Huawei]ospf 1
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net 192.168.23.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]net 192.168.3.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]q
//从路由器R1的e0/0/0接口开启DHCP转功能
[Huawei]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]dhcp select relay
[Huawei-Ethernet0/0/1]dhcp relay server-ip 192.168.12.1
测试
