玩转多路由的静态路由

配置接口IP地址并通过静态路由实现全网互通，如图 所示。

实现此案例需要按照如下步骤进行。

步骤一：配置R1的接口地址

<Huawei>system-view 
[Huawei]sysname R1    
[R1]interface GigabitEthernet 0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.2.1  255.255.255.0
[R1]interface GigabitEthernet 0/0/1
[R1-GigabitEthernet0/0/1]ip address 192.168.1.254  255.255.255.0

步骤二：配置R2的接口地址

<Huawei>system-view 
[Huawei]sysname R2    
[R2]interface GigabitEthernet 0/0/0
[R2-GigabitEthernet0/0/0]ip address 192.168.2.2  255.255.255.0
[R2]interface GigabitEthernet 0/0/1
[R2-GigabitEthernet0/0/1]ip address 192.168.3.1  255.255.255.0

步骤三：配置R3的接口地址

<Huawei>system-view 
[Huawei]sysname R3    
[R3]interface GigabitEthernet 0/0/0
[R3-GigabitEthernet0/0/0]ip address 192.168.4.254  255.255.255.0
[R3]interface GigabitEthernet 0/0/1
[R3-GigabitEthernet0/0/1]ip address 192.168.3.2  255.255.255.0

步骤四：配置静态路由

[R1]ip route-static 192.168.3.0 255.255.255.0 192.168.2.2
[R1]ip route-static 192.168.4.0 255.255.255.0 192.168.2.2
[R2]ip route-static 192.168.1.0 255.255.255.0 192.168.2.1
[R2]ip route-static 192.168.4.0 255.255.255.0 192.168.3.2
[R3]ip route-static 192.168.1.0 255.255.255.0 192.168.3.1
[R3]ip route-static 192.168.2.0 255.255.255.0 192.168.3.1

步骤五：使用ping命令测试