Pythonの後極クラックコードをスライディング
カタログを読みます
-
コード摺動後方ポール
-
実現
-
必要な基本変位運動
-
二つの絵を比較すると、中にギャップを特定
-
画像を入手
-
移動体の変位に応じて
-
詳細コード
-
トップに戻ります
コード摺動後方ポール
ます。http://www.geetest.com/上の写真は、認証、検査ポール公式サイトの非常に経験に所属する最も一般的なスライドです。
今ファンタスティックな経験検証コードは、2017年7月の時点で、バージョン3.0に更新されている以上4億広くライブビデオで使用される回のデイサービス応答、金融サービス、電子商取引、ゲームは、全世界で1600万企業が極端な経験を使っているとなっていますエンターテイメント、政府の企業やサイトの他の主要なタイプ
我々はアナログ形式の要求を指示した場合にこのタイプの検証のために、面倒な認証および認定プロセスパラメータはあなたに1つの場所で壊れた卵を作るだろう、我々はこの問題を解決するために、セレンブラウザを駆動することができ、大まかに以下のステップに分け
1、ユーザー名とパスワードを入力してください
2.ポップ・チャートで隙間がない、確認するために、ボタンをクリックしてください
3、隙間の写真を取得しません
図4にノッチを起動するためにスライドボタンをクリックします。
5、ギャップ画像を得ます
図6は、二つの絵と比較し、その滑り変位のギャップを識別します
人間の行動習慣、セクション後の微小変位部への全変位に応じて7、
8.モバイルの変位
9と、登録を完了
トップに戻ります
実現
必要な基本変位運動
これは、(最初の一様均一に減速し、その後、加速用)中始点から終点までの車と同様、均一な直線運動をシフト移動ギアの移動に対応します。
一定の加速度であり、である(すなわち、単位時間当たりの加速度は一定である)は、時間T
モバイルコードの実装の変位
def get_track(distance): ''' 拿到移动轨迹,模仿人的滑动行为,先匀加速后匀减速 匀变速运动基本公式: ①v=v0+at ②s=v0t+(1/2)at² ③v²-v0²=2as :param distance: 需要移动的距离 :return: 存放每0.2秒移动的距离 ''' # 初速度 v=0 # 单位时间为0.2s来统计轨迹,轨迹即0.2内的位移 t=0.1 # 位移/轨迹列表,列表内的一个元素代表0.2s的位移 tracks=[] # 当前的位移 current=0 # 到达mid值开始减速 mid=distance * 4/5 distance += 10 # 先滑过一点,最后再反着滑动回来 while current < distance: if current < mid: # 加速度越小,单位时间的位移越小,模拟的轨迹就越多越详细 a = 2 # 加速运动 else: a = -3 # 减速运动 # 初速度 v0 = v # 0.2秒时间内的位移 s = v0*t+0.5*a*(t**2) # 当前的位置 current += s # 添加到轨迹列表 tracks.append(round(s)) # 速度已经达到v,该速度作为下次的初速度 v= v0+a*t # 反着滑动到大概准确位置 for i in range(3): tracks.append(-2) for i in range(4): tracks.append(-1) return tracks
对比两张图片,找出缺口
def get_distance(image1,image2): ''' 拿到滑动验证码需要移动的距离 :param image1:没有缺口的图片对象 :param image2:带缺口的图片对象 :return:需要移动的距离 ''' # print('size', image1.size) threshold = 50 for i in range(0,image1.size[0]): # 260 for j in range(0,image1.size[1]): # 160 pixel1 = image1.getpixel((i,j)) pixel2 = image2.getpixel((i,j)) res_R = abs(pixel1[0]-pixel2[0]) # 计算RGB差 res_G = abs(pixel1[1] - pixel2[1]) # 计算RGB差 res_B = abs(pixel1[2] - pixel2[2]) # 计算RGB差 if res_R > threshold and res_G > threshold and res_B > threshold: return i # 需要移动的距离
获得图片
def merge_image(image_file,location_list): """ 拼接图片 :param image_file: :param location_list: :return: """ im = Image.open(image_file) im.save('code.jpg') new_im = Image.new('RGB',(260,116)) # 把无序的图片 切成52张小图片 im_list_upper = [] im_list_down = [] # print(location_list) for location in location_list: # print(location['y']) if location['y'] == -58: # 上半边 im_list_upper.append(im.crop((abs(location['x']),58,abs(location['x'])+10,116))) if location['y'] == 0: # 下半边 im_list_down.append(im.crop((abs(location['x']),0,abs(location['x'])+10,58))) x_offset = 0 for im in im_list_upper: new_im.paste(im,(x_offset,0)) # 把小图片放到 新的空白图片上 x_offset += im.size[0] x_offset = 0 for im in im_list_down: new_im.paste(im,(x_offset,58)) x_offset += im.size[0] new_im.show() return new_im def get_image(driver,div_path): ''' 下载无序的图片 然后进行拼接 获得完整的图片 :param driver: :param div_path: :return: ''' time.sleep(2) background_images = driver.find_elements_by_xpath(div_path) location_list = [] for background_image in background_images: location = {} result = re.findall('background-image: url\("(.*?)"\); background-position: (.*?)px (.*?)px;',background_image.get_attribute('style')) # print(result) location['x'] = int(result[0][1]) location['y'] = int(result[0][2]) image_url = result[0][0] location_list.append(location) print('==================================') image_url = image_url.replace('webp','jpg') # '替换url http://static.geetest.com/pictures/gt/579066de6/579066de6.webp' image_result = requests.get(image_url).content # with open('1.jpg','wb') as f: # f.write(image_result) image_file = BytesIO(image_result) # 是一张无序的图片 image = merge_image(image_file,location_list) return image
按照位移移动
print('第一步,点击滑动按钮') ActionChains(driver).click_and_hold(on_element=element).perform() # 点击鼠标左键,按住不放 time.sleep(1) print('第二步,拖动元素') for track in track_list: ActionChains(driver).move_by_offset(xoffset=track, yoffset=0).perform() # 鼠标移动到距离当前位置(x,y) if l<100: ActionChains(driver).move_by_offset(xoffset=-2, yoffset=0).perform() else: ActionChains(driver).move_by_offset(xoffset=-5, yoffset=0).perform() time.sleep(1) print('第三步,释放鼠标') ActionChains(driver).release(on_element=element).perform()
详细代码
from selenium import webdriver from selenium.webdriver.support.ui import WebDriverWait # 等待元素加载的 from selenium.webdriver.common.action_chains import ActionChains #拖拽 from selenium.webdriver.support import expected_conditions as EC from selenium.common.exceptions import TimeoutException, NoSuchElementException from selenium.webdriver.common.by import By from PIL import Image import requests import time import re import random from io import BytesIO def merge_image(image_file,location_list): """ 拼接图片 :param image_file: :param location_list: :return: """ im = Image.open(image_file) im.save('code.jpg') new_im = Image.new('RGB',(260,116)) # 把无序的图片 切成52张小图片 im_list_upper = [] im_list_down = [] # print(location_list) for location in location_list: # print(location['y']) if location['y'] == -58: # 上半边 im_list_upper.append(im.crop((abs(location['x']),58,abs(location['x'])+10,116))) if location['y'] == 0: # 下半边 im_list_down.append(im.crop((abs(location['x']),0,abs(location['x'])+10,58))) x_offset = 0 for im in im_list_upper: new_im.paste(im,(x_offset,0)) # 把小图片放到 新的空白图片上 x_offset += im.size[0] x_offset = 0 for im in im_list_down: new_im.paste(im,(x_offset,58)) x_offset += im.size[0] new_im.show() return new_im def get_image(driver,div_path): ''' 下载无序的图片 然后进行拼接 获得完整的图片 :param driver: :param div_path: :return: ''' time.sleep(2) background_images = driver.find_elements_by_xpath(div_path) location_list = [] for background_image in background_images: location = {} result = re.findall('background-image: url\("(.*?)"\); background-position: (.*?)px (.*?)px;',background_image.get_attribute('style')) # print(result) location['x'] = int(result[0][1]) location['y'] = int(result[0][2]) image_url = result[0][0] location_list.append(location) print('==================================') image_url = image_url.replace('webp','jpg') # '替换url http://static.geetest.com/pictures/gt/579066de6/579066de6.webp' image_result = requests.get(image_url).content # with open('1.jpg','wb') as f: # f.write(image_result) image_file = BytesIO(image_result) # 是一张无序的图片 image = merge_image(image_file,location_list) return image def get_track(distance): ''' 拿到移动轨迹,模仿人的滑动行为,先匀加速后匀减速 匀变速运动基本公式: ①v=v0+at ②s=v0t+(1/2)at² ③v²-v0²=2as :param distance: 需要移动的距离 :return: 存放每0.2秒移动的距离 ''' # 初速度 v=0 # 单位时间为0.2s来统计轨迹,轨迹即0.2内的位移 t=0.2 # 位移/轨迹列表,列表内的一个元素代表0.2s的位移 tracks=[] # 当前的位移 current=0 # 到达mid值开始减速 mid=distance * 7/8 distance += 10 # 先滑过一点,最后再反着滑动回来 # a = random.randint(1,3) while current < distance: if current < mid: # 加速度越小,单位时间的位移越小,模拟的轨迹就越多越详细 a = random.randint(2,4) # 加速运动 else: a = -random.randint(3,5) # 减速运动 # 初速度 v0 = v # 0.2秒时间内的位移 s = v0*t+0.5*a*(t**2) # 当前的位置 current += s # 添加到轨迹列表 tracks.append(round(s)) # 速度已经达到v,该速度作为下次的初速度 v= v0+a*t # 反着滑动到大概准确位置 for i in range(4): tracks.append(-random.randint(2,3)) for i in range(4): tracks.append(-random.randint(1,3)) return tracks def get_distance(image1,image2): ''' 拿到滑动验证码需要移动的距离 :param image1:没有缺口的图片对象 :param image2:带缺口的图片对象 :return:需要移动的距离 ''' # print('size', image1.size) threshold = 50 for i in range(0,image1.size[0]): # 260 for j in range(0,image1.size[1]): # 160 pixel1 = image1.getpixel((i,j)) pixel2 = image2.getpixel((i,j)) res_R = abs(pixel1[0]-pixel2[0]) # 计算RGB差 res_G = abs(pixel1[1] - pixel2[1]) # 计算RGB差 res_B = abs(pixel1[2] - pixel2[2]) # 计算RGB差 if res_R > threshold and res_G > threshold and res_B > threshold: return i # 需要移动的距离 def main_check_code(driver, element): """ 拖动识别验证码 :param driver: :param element: :return: """ image1 = get_image(driver, '//div[@class="gt_cut_bg gt_show"]/div') image2 = get_image(driver, '//div[@class="gt_cut_fullbg gt_show"]/div') # 图片上 缺口的位置的x坐标 # 2 对比两张图片的所有RBG像素点,得到不一样像素点的x值,即要移动的距离 l = get_distance(image1, image2) print('l=',l) # 3 获得移动轨迹 track_list = get_track(l) print('第一步,点击滑动按钮') ActionChains(driver).click_and_hold(on_element=element).perform() # 点击鼠标左键,按住不放 time.sleep(1) print('第二步,拖动元素') for track in track_list: ActionChains(driver).move_by_offset(xoffset=track, yoffset=0).perform() # 鼠标移动到距离当前位置(x,y) time.sleep(0.002)
# if l>100: ActionChains(driver).move_by_offset(xoffset=-random.randint(2,5), yoffset=0).perform() time.sleep(1) print('第三步,释放鼠标') ActionChains(driver).release(on_element=element).perform() time.sleep(5) def main_check_slider(driver): """ 检查滑动按钮是否加载 :param driver: :return: """ while True: try : driver.get('http://www.cnbaowen.net/api/geetest/') element = WebDriverWait(driver, 30, 0.5).until(EC.element_to_be_clickable((By.CLASS_NAME, 'gt_slider_knob'))) if element: return element except TimeoutException as e: print('超时错误,继续') time.sleep(5) if __name__ == '__main__': try: count = 6 # 最多识别6次 driver = webdriver.Chrome() # 等待滑动按钮加载完成 element = main_check_slider(driver) while count > 0: main_check_code(driver,element) time.sleep(2) try: success_element = (By.CSS_SELECTOR, '.gt_holder .gt_ajax_tip.gt_success') # 得到成功标志 print('suc=',driver.find_element_by_css_selector('.gt_holder .gt_ajax_tip.gt_success')) success_images = WebDriverWait(driver, 20).until(EC.presence_of_element_located(success_element)) if success_images: print('成功识别!!!!!!') count = 0 break except NoSuchElementException as e: print('识别错误,继续') count -= 1 time.sleep(2) else: print('too many attempt check code ') exit('退出程序') finally: driver.close()
成功识别标志css
本文来源作者:一只小小寄居蟹
链接:https://www.cnblogs.com/xiao-apple36/p/8878960.html
如有侵权,请联系我们删除