T470P notebook in the solid state and solid state system _ the full installation steps

table of Contents

 

Table of Contents

1. Disassemble

Tip 2. Pre-installed system

3. Install the new system to SSDs

4. A process for the original system: the system is not installed in the solid state prior to system disk to be formatted  

5. Process installed

6. Expand


1. Disassemble

1. Prepare a screwdriver, fins (bank card is also OK).

The back can be screwed screws are unscrewed, remove the battery, SIM card slot on the right side of the computer to take the needle removed, with fins along the fuselage began to draw a circle from the slot at Jin Qiao use, do not vigorously a miracle. This basically apart (attached: FIG disassemble)

2. Prepare SSDs

The solid-state what model to buy, whether to adapt the machine, please ask before selling single solid customer service.

Toshiba bg3 256G

 

3. Find the corresponding position , first remove the screws, 30 ° slant angle of the slot, and then the fixing screw. 

4. Replace the cover , starting at the beginning of the battery lid, pressing tighten the screws

This solid state disk has been successfully safety to the notebook.

Problems encountered: I did not expect this machine so well demolished, a former Hewlett-Packard also need to take off the keyboard after removing the gray thinking that way clearing a bar, remove the fan results, but no fan from the inside out, just. blowing out a bit, the effect is minimal ... right again installed it back. wanted to talk about, but it does not really turn up, plug in the power, the power button flashes three times, after a period of time, press the power, the power button is still only flash there is no next three movement immediately to panic. Lenovo customer service to find recommended to the service shop to detect what hardware, unfortunately, the warranty period of just over five days worth of melancholy, thinking he did not move somewhere, just split a little fan then press back ... the road five kilometers to reach the Lenovo sale, think they see the US line is exposed upset, can only look to see the demolition, looks like a little pull electronic interface with the motherboard should be the bois discharge that is reset, so that finally the screen lit up.

Problem: press the power button, the power button flashes three times, the screen does not shine

Solution: The first all external devices, power supply, remove the battery, keep pressing the power button for 30 seconds (discharge operation ..), if you can try to re-boot .Ps:. Online saying, when I tried it, no matter use..

               Second. As I said above, open the back cover, a piece of electronic things like pull down motherboard connector fitting at, plug up, connect the power, see if you can turn on. (I was open)

 


 

2019.3.16 add new content 2:

Tip 2. Pre-installed system

For added solid and as the startup disk to increase speed, it is not required have to install a new system! By partitioning assistant tool , system migration to solid-state drives. A lot of people also do not include before I know this operation of the system ... have been installed before the win10 genuine, reinstall the system can only use their own piracy this regard, with a little bit of a genuine upgrade is not bad; of course itself is win10 home version, install a pro version plus cracking tools will do. but for the c drive to important data and more time I do not know what the backup, then use it to migrate the system, save time and worry !! !!

Here I have no chance to try, you can refer to the article:  How to migrate SSDs mechanical hard disk system? Methods migration system partition assistant to the SSD 

 


 

3. Install the solid state drive to the new system

A preparation:. U disk boot disk creation and win10 download

1. Prepare a blank U-disk, with the micro-PE tool , make a boot disk, install the system is particularly pure.

Here U disk will be formatted, please note that the backup data!

Chinese cabbage, then install the system, but simply a bunch of junk pre-installed software (including 360!) After the system is successfully installed directly deny it!

2. Download the windows system you want, you can go to MSDN download. Win10 end of this article there is a permanent cracking tools (need to turn off anti-virus software to kill)

3. Under good win10 u disk into the mirror.

II. Begin installation

1. boot, press the F1 key to enter the BIOS (sometimes start too fast, you need to reboot again press F1 to enter the BIOS)

    1) Access Security-> Secure Boot change the option to [Disabled]

    2). Re-entering Startup-> UEFI / Legacy Boot option changes to [UEFI Only]

This two-step operation to complete, will not appear unable to recognize SSD interface (BOOTMRG is missing)

Adjust the boot security
Do not modify the following operations can not be modified

 

   

 

Without change, there will be solid after the system is installed BOOTMRG is missing

 

Solid state drive is not recognized

2. Press F12 to enter the Boot Menu (sometimes start too fast, you need to reboot again press F12 to enter BooMenu), select the check usb as the startup disk, choose USB HDD, that is, into the micro-PE system.

     Knowledge Point: ATA SSD: Solid State Drive from system start ATA HDD: from the hard disk ATAPI CD: boot from the CD

                  USB CD: drive to start the system from an external USB HDD: boot from external memory, such as hard disk, U disk, etc.              

                  PCI LAN: Boot from LAN

       Original knowledge: BOOT menu PCI LAN What does it mean

3. Two ways of mounting system

But no matter which way selection for SSDs, the most important thing is the end of the article there is 4k aligned detection tool download.

4K misaligned, affecting both solid life, but also affect the read and write performance solid state, which is pre-installed system you need to know, or need to take a lot of detours.

           Detecting 4KB sector alignment detector

                                      1 embodiment using solid state detector AS SSD write speed of the tool:

4K is misaligned, only the reading speed of 1100 + M ...
After its 4K display green

                                     Mode 2 DiskGenius use partitioning tool:

1) .win10 comes directly mounted setup.

This is automatically installed 4K aligned, so do not worry about how 4k aligned Right downloaded win10 systems, micro decompression PE 7z comes to a specified folder, there Setup.exe open, open the installation, which states that the operation of several key steps. Figure can be.

     

Select Custom

 

Just wait for the rest, the installation is successful, restart, unplug the U disk, you can boot.

At this dual system, the system boot Alternatively, for how to operate the system before, go into detail later.

possible problems:

1. If the boot that displays an error code: 0xc0000225, SSDs will enter the BIOS as the first option can solve the problem.

   Step: startup-> Boot-> solid state drives to adjust to press F10 to start the first save.

2. If the figure shows appear, you can only remove the mechanical hard disk, the installation again to resolve the issue as soon as possible, but demolition machinery too much trouble, not as directly for the second step ...

Installation crashes interface

2). The use of micro-PE installation tool to install windows.

1_ The first step is not to install win10, but to find DiskGenius.exe this software, the fast solid-state drive partition, which has a partition alignment of an integer multiple of this .., you can select 4096K, the number of partitions instead 1, the hard disk type is NTFS. (here the solid state drive will be formatted)

2_ select windows installation tool on the desktop

Be prompted to restart later point to determine their own after the restart, unplug the U disk, open the opportunity to display dual system, you can select the newly installed system.

 

possible problems:

   If the boot that displays an error code: 0xc0000225, SSDs will enter the BIOS as the first option can solve the problem.

   Step: startup-> Boot-> solid state drives to adjust to press F10 to start the first save.

 

This, the system is installed almost, driven updates and system updates,

 


 

4. A process for the original system: the system is not installed in the solid state prior to system disk to be formatted

The first : the original formatting system, the extra space of sixty or seventy G, in fact I would say the solid state of 256G, the data much, I do not play the game no need to format the original system, but I or formatted, and there is a problem, there is to see people of this article can prevent these problems from occurring.

Before formatting, is a backup of the original system of important data. For me, the more important documents stored in the c disk images directly to the data to a different drive letter, and browser bookmarks which is very important , it is necessary to enter the browser to export bookmarks to another drive letter, and the browser (chrome browser) to save the password, click the three dots in the figure for export, I forgot to back up, but I log a Google account, login account again when, before the backup password will be restored. What else is not.

The second : Do not format the original system, not much data, enough storage space, can keep him, if selected will start despise dual system, you can use soft coal cube to another system to hide the new work. as the system default startup items, (here I have not tried, as any question, welcome that.)

 

 

For formatting system problems arise:

Fingerprint, it can also be used. If the format of the original system, fingerprint may not be used, and did not find the solution! So good or keep the original system.

 

Installed after the completion of the letter is confusing, do not meet before the habit, you can use DiskGenius tool to change the drive letter, the tool can also be reassigned to the size you want for hard disk space, extended partition that is in the figure below options.

 

 


 

5. Process installed

So much can be subjected to what I would like ... very simple installation, pit for the first time encountered all kinds of really made me despair, the problem can not boot after installing solid disassemble ...

The first installation with a micro-PE, no concept of consciousness 4k aligned with this test speed make selling solid customer service to see my tips 4k no alignment problem I reinstalled before reloading, I uninstall the original system;

After the second system is installed, install using setup directly, the boot and found 4k aligned, but the fingerprints fails, Device Manager no biometric device, install the driver were to no avail, to find two Lenovo customer service also did not succeed I thought it was the system of choice version of win10, win10 carried out an installation professional workstation version of the third, there is no continuing education win10 version of the installation for the fourth time, still no, so I wanted to like it at first Like once installed micro fingerprint PE should have it!

Fifth heavy equipment, wanted to have the first installation of a fingerprint is successful, it has to install micro PE, and advance a 4k aligned, but well after the boot error code: 0xc0000225, I thought there was a big mistake it feels larger tiles can not, forget about fingerprints;

Sixth heavy equipment, installation with setup, direct collapse can not be installed, customer service tips I need to remove the mechanical hard! I went .. finished, this messed up! Disassemble can not boot so I have some fear resisted dismantling mechanical hard drive. I thought quickly installed into the system can be like, what means that no fingerprints, 4K will be able to align ...

Seventh heavy equipment, for an installed capacity of ways, cabbage installed, Fool installed, error code is still open: 0xc0000225, then Baidu, the keys to a solid start as the first, which is not found in the boot disk Code Cause appear after boot automatically install a lot of applications, when you see one software appears on the desktop, it can not endure;

Start the eighth reinstall, reinstall the system continue to choose micro PE, finally succeeded boot into the system, first to see if there are fingerprints, the result is still no fingerprints, aligned test 4k, well, it would. Not to engage afraid afraid ...

Now think of the first time there will be fitted with a micro-PE fingerprint system should be there were reasons for the original system, should the format of the original system, for T470p beauty line I was unable to turn up or keep the original system .. so good!

Seek wealth and risk, insurance I really prayed, but wealth (4K and fingerprints) it is not, nothing, whichever is heavy, and not save much time fingerprint, password character, the boot is very fast .

 

Let me re-install the solid state to install the system I can use 40 minutes to complete (not including software download time), but I spent three days time, about six hours a day engaged him ... really tired out if the ... ... hope that you can install solid detours, and can achieve an appropriate choice.

Supplements test speed of solid-state picture:

4k alignment is significantly faster. Toshiba rc100 is a good solid.

 


6. Expand

Dual System Installation - Installing Ubuntu Windows basis 

                                                             

 

 

 


Writing is not easy, if it helps you, please share this article point to a wave of praise comment, thank you for your support If you have questions, you can contact me VX:! Lxy9961108

He published 190 original articles · won praise 153 · views 90000 +

Guess you like

Origin blog.csdn.net/qq_36852780/article/details/88411075