Plus a piece of notebook SSD solid state hard drive, install win10 with UTFI PE after the restart can not enter the system, boot prompt: NO Bootable Device.
The reason: to buy a new computer, start the BIOS of UEFI + hard drive GPT partition boot, old SATA hard drive is that GPT partition format, it can start, the new SSD hard drive is not GPT partition, but MBR partition, the system does not support this format starts.
First make a good support UEFI boot is U-PE, here is the old peach PE, to download a good iso's WIN1O system installation files on the old SATA hard disk. After U disk PE, with PE inside DiskGenius partitioning tool, the SSD drive into GPT partition (ESP partition that you want to check, it will automatically assign the hidden boot partition 100MB after checking), to convert the old hard disk MBR partition, and remove the old hard drive ESP partition.
Restart the default BIOS recovery.
After the system reboot into PE files inside the system, find the iso WIN10 installation file, double-click setup.exe standard system installation, select the SSD partition, step by step, reboot the system can recognize the new SSD hard disk to start disk. Otherwise BISO startup items inside can not see SSD drives. Standard installation will automatically SSD hard drive partition to boot ESP added.