Look at one minute novice tutorial , each step must be to ensure proper. If re-Rom, refer to the following frequently asked questions, see if I can solve themselves. If you can not solve, contact us again, when the contact Do not ask why the only Rom, natapp how to use such meaningless questions. For more information ought to try to, try to tunnel type, an error message capture, debug information, so send us, we go to determine the problem, help solve.
Here are common errors, as well as self-service solutions
"Authentication error, please log in https://natapp.cn view information: errorCode: 200 Msg: create free / postpaid log in through the tunnel authtoken parameter"
This is not representative of authtoken input parameters, or authtoken parameter input error.
Browser Access appears: Tunnel ywy9n8.natappfree.cc not found error
This is not even on behalf of natapp server to check whether the client company, in the online state, and check whether the domain name input errors. After been modified after to clear the browser cache refresh to try again.
The connection authentication server after the error retry ... 1 second
after two seconds the connection authentication server error retry ...
This error, on behalf of a network problem, wait a few minutes to try again, or check whether the DNS has been replaced 114DNS or Ali DNS , the http_proxy = config.ini which must be left blank, access http://pubstatic.upyun.com/cdn -stream-test.html detect problems.
Appear in red Tunnel Status Reconnecting ...
Ali replace the DNS , check if there are other places have run natapp client. If not enough, add the command line parameter -log = stdout or in the config.ini log = stdout and then view the debug log.
Tunnel http://3du4wy.natappfree.cc invalid unable to connect to this port 127.0.0.1:80 not yet available Web services Powered By natapp.cn
This represents natapp client has successfully connected, Web services (nginx, iis, etc.) you do not open the local port or port is incorrect. Tomat such as the default port of 8080. You need to configure the tunnel, local 8080, after the restart to save the client.
Open the browser http://127.0.0.1 to confirm turned on web service (do not enter port represents 80)
If web access, etc. 500,404 errors, which represents natapp tunnel penetrate fully successful, these errors are your local Web service information is returned, check the local Web service or program.
Webpack Invalid Host header errors, webpack-dev-server disableHostCheck can be set to true. Host Header arranged at or modifications tunnel.
