The new route 3newifi3 router Brush Brush tutorial newifi3breed unlock white brush breed Lao Maozi Padavan router firmware

Brush routing onlookers 33,696 times 5 Comments Date: 2018-11-23 Font: Tai Zhong Small

 

This tutorial is only for three new routers white players, the god do not spray, very detailed.

Let me talk about, I November 2018 22 Nisshin start of a new three routers, 20:00 to get the goods, because I wanted to brush Lao Maozi impatient, has been frustrating, with the grace of a key brushes breed forum mountain unlock unsuccessful, until 3:00 the next day did not make things more and, fortunately, the next day to get Mr. Wang patient guidance, and finally with a large brush into the forum h method successfully breed, thanks again. Here is the tutorial.

Lao Maozi three new router brush in two steps, the first breed is unlocked brush, the brush is the second firmware Lao Maozi like. Brush before two good tool to download two files and directly download Baidu search " WinSCP " and " PuTTY Chinese version of "

Brush before I download the first packaged need to use the file,

Lao Maozi new three special routing brush white .zip:  https://cfctas.ctfile.com/fs/1397394-332216298   alternate download link:  https://pan.baidu.com/s/1KfEIWitYioMjKHQRV1h2LQ   extraction code: jt3r

First, brush breed unlocked

1. Open Firmware SSH

•     a) Turn on the router, enter the management interface (assuming that the router IP address is 192.168.99.1)

•     b) Enter http://192.168.99.1/newifi/ifiwen_hss.html in your browser and enter

•     c) page displays the  success  signifies turned SSH

For this step I like this operation, first of all to the three new brush, we will build three new computer and connect, how it is connected, listen to me carefully he said. Necessary to prepare two cable: a first optical connector root cats and three new WAN port, a second root port, and connect the computer network cable LAN port new three. The purpose is to ensure that the new three can be connected to the computer but also the Internet.

Once connected, enter http://192.168.99.1/newifi/ifiwen_hss.html page shows Succes , completing the first step.

2. SSH into the environment router

    a) using the router connection PuTTY

Here in detail how to use putty to say next connect to the router, this step is to use a software nice we just download the ( putty Chinese version ), open the software enter the host name where 192.168.99.1

As shown above, then fill in the host router ip address (where 3 new router default IP address is: 192.168.99.1) Fill Port: 22, type of connection to select SSH, and finally select Open on the line, the following is log into the router interface

First, enter the username: root and password is the router's login password, note the password entered here are not displayed, just enter the correct Enter on the line.

This time the second step is complete. This interface instead of closing, the fourth step to use, remember!

3. unlock files uploaded to the router

1. Download attachments, unpack newifi-d2-jail-break.ko

2. Using tools such as WinSCP to upload it to the / tmp directory of the router

3. Or set up a local HTTP server using HFS, wget command to download and use in the SSH

4. Or set up a local TFTP server with tftpd32 / tftpd64, and Download tftp command in SSH

5. Of course, the line U disk

This step among Annex I've unpacked out, there are four just downloaded, the name is newifi-d2-jail-break.ko

具体操作：打开winscp（已经下载好了）按照上图填写，只把密码改成自己路由器的，（文件协议为scp、主机名为192.168.99.1、端口号22、用户名root、密码是自己路由器密码）其他的要和图片一模一样！

改完之后点击登录。如果出现提示框，点“是”就行了

登录之后在进入根目录右半部分找到tmp这个文件，把我们下载好的newifi-d2-jail-break.ko复制到tmp当中点确定

第三步到这里完成了。

4.  开始解锁

    a) SSH 进入 /tmp 目录（就是第二步的在那里面输入下面的命令即可）

cd /tmp

    b) 加载 newifi-d2-jail-break.ko

insmod newifi-d2-jail-break.ko

    c) 此时 SSH 会停止响应，因为 newifi-d2-jail-break.ko 会冻结系统的其他功能，强制写入 Newifi D2 专用版 Breed 到 Flash

    d) 成功后路由器会自动重启。断电后按复位健/USB键然后通电开机均可进入 Breed（一定要按住复位键然后再通电才行的）

在光标那里输入括号里面的（cd /tmp）需要注意的是cd后面需要加个空格，完事后回车，出现以下界面图片中我第一次没加空格，所以第二次加了才正确。出现这个界面后，

在光标输入代码（ insmod newifi-d2-jail-break.ko）点回车，路由器这时候就重启了，看着后面灯灭了直接把路由器电源拔下来就行，然后按住路由器后面的rest复位键通电，期间一直按着，等路由器开机十几秒后再松开。现在就已经进入breed控制台了。

5、解锁后刷固件

路由器开机后在浏览器输入192.168.1.1出现breed控制台，想备份的话点击固件备份把两个备份到磁盘里

Backup finished click firmware update, the firmware downloaded Lao Maozi RT-N56UB1-newif3D2-512M_3.4.3.9-099 upload pictures bid arrows do not control, directly behind the point of view of the Lao Maozi firmware upload firmware like, after so

Click Upload appear next chart

Then click update

The device is restarted after the update finished 

Enter 192.168.123.1 in the browser

Then let enter the account password is admin into two after that Lao Maozi, Ends tutorial.