Redmi 10A one-click root tutorial to unlock BL, skip 168 hours limit, brush mask root, save black bricks, brush machine, solve the problem of unable to unlock BL new version, flash machine

The new version of Redmi 10A cannot unlock BL in seconds. root bootloader

It is necessary to unlock the bootloader in order to flash the machine, save bricks by line flashing, and obtain Root permissions.

We call this operation of unlocking the restrictions on flashing the phone as unlocking BL. Only after unlocking the BL can you perform a series of operations such as flashing, flashing Root permissions, and so on. (Note: bootloader lock is not lock screen password lock)

Note: Unlocking the bootloader will clear the phone data, please back up the data to the computer or memory card before unlocking.

The following is the official unlock BL tutorial

Unlock BL operation steps:

1. First, apply for the permission to unlock the Xiaomi account on the Xiaomi official website. You can refer to the following figure:

Unlock application address http://www.miui.com/unlock/index.html

1.1->>Click [Unlock Now] to enter the follow-up page (you need to log in to your Xiaomi account). If you need to fill in the application, please fill in this reason: I am a Xiaomi enthusiast user, and the application for unlocking is my voluntary act. Please approve it, thank you .

1.2->>Then download the unlocking tool and unzip it into a folder

1.3->>Double-click miflash_unlock.exe to open the tool. Agree to the disclaimer, then log in to your Xiaomi account.

1.4->>Verifying whether your account supports unlocking (basically no problem if the application is passed)

1.5->>Click the [Settings] icon in the upper right corner, click Detect, and check whether the Xiaomi driver is installed on the computer. If not, click Install.

Operation on mobile phone:

① Settings, my device, all parameters, miui version, click the miui version more than 7 times in a row, then return to the settings, find more settings, find the developer options, find the device unlock status, click to bind the account and device

② Manually enter the Bootloader mode (after shutting down, press and hold the volume down button and the power button at the same time)

③ Connect the phone via USB, click the "Unlock" button

Precautions:

1. The failure to unlock is generally because the Xiaomi account has not been activated for unlocking permission or the permission is too low to unlock. Please refer to the prompt for specific reasons.

2. If you want to unlock quickly, it is best to use a high-level Xiaomi account (for example, with more than 1000 points)

3. Unlocking may cause the phone data to be cleared, please make a data backup

4. After unlocking, you can swipe into the third-party recovery for swipe, root operation or line swipe to save bricks

5. Some old Xiaomi models do not need to be unlocked (such as Xiaomi 1 2s and other phones before 2015)

6. After flashing into the development version of some models, you must log in to the Xiaomi account that has been reviewed and unlocked, otherwise it cannot be unlocked normally!

Problems that may be encountered during unlocking Bootloader:

Q: Why does the unlock tool prompt "account device is inconsistent"?
A: This is because the account and device verification have not been passed during the unlocking process. The solution is to upgrade the phone to the latest stable version or swipe the card from the stable version to the latest development version, and log in on the device to be unlocked and the unlocking tool The same account, and go to "Settings -> Developer Options -> Device Unlock Status" to bind the account and device (this option is only available in versions after V8.1).

Q: Why does the unlock tool prompt "unable to obtain phone information"?
A: In this case, the device driver on the computer is not installed properly. You can try to reinsert the USB cable or change the USB interface or another USB cable to wait for the computer to install the driver slowly.

However, it is understood that the latest version of redmi 10a shipped in June 2022 has been unable to unlock bL in seconds, and the official has blocked the loophole

But there are new ways to solve it. Currently,

 Redmi 10A one-key root tutorial skips 168 hours to unlock BL limit perfect mask..., mobile phone data flashing package ROM root TWRP data area- Powered by Discuz!

The solution is to turn on the OEM unlock in the settings, and then use a special software to unlock, you can click the link to view 

Guess you like

Origin blog.csdn.net/z920981023/article/details/128816966