Motion to i.MX6Q development board is based on NXP NXP processor platform, compatible with single-core, dual-core, industrial, automotive, i.mx6q latest version PLUS, may need to be replaced, to develop high-end products worry-free.
i.MX6Q Development Board Interface Introduction
i.MX6Q core board - quad-core Commercial:
i.MX6Q core board - Quad-Core Industrial:
i.MX6Q core board -PLUS Commercial:
i.MX6DL core board - dual-core Commercial:
Floor structure Dimensions:
1. POWER Power Interface
Power input is 12V / 2A +, power supply to the base plate.
Schematic section as shown below.
2. SWITCH power switch
Touch the power switch controls power on and off boards.
Schematic section as shown below.
3. DIP switch
7 DIP switch control iMX startup mode.
Schematic section as shown below.
4. JTAG Interface
Reservations JTAG interface, users need to be extended.
Schematic section as shown below.
5. CAN Interface
Schematic section as shown below.
6. CAMERA Interface
To 500 million auto-focus camera module.
Schematic section as shown below.
7. GPIO / SPI / I2C Interface
Multiplex expansion port, support for GPIO expansion, CAN bus, I2C module.
Schematic section as shown below.
8. User Key function keys
Four extended buttons, support sleep, reset, volume + volume -.
Schematic section as shown below.
9. MIC microphone and headphone PHONE
Supports microphone input, headphone output support.
Schematic section as shown below.
10. Serial
Two serial ports 232 level.
Schematic section as shown below.
11. USB Host
3-way USB expansion port.
Schematic section as shown below.
12. TF Card
Standard TF card slot.
Schematic section as shown below.
13. 4G module
As shown below.
14. WIFI module
SDIO WIFI module.
Schematic section as shown below.
15. GPS module
GPS modules, satellite positioning.
Schematic section as shown below.
16. Ethernet port
Onboard Gigabit wired Ethernet, to enhance the transmission capacity, faster, more fluid pace.
Schematic section as shown below.
17. LCD Interface
Supports one RGB-LCD interface, 2 LVDS-LCD interface.
RGB-LCD portion of the schematic shown below.
There are two LVDS signals, the way in which the flexible flat wire interface portion as shown in FIG.
LVDS signals, HDMI interface section diagram as shown below.
18. HDMI Interface
HDMI output interface standard.
Schematic section as shown below.
19. OTG interfaces
OTG interface. OTG interface for programming operating system images, may also be used to install Android APP.
Schematic section as shown below.
20. RTC Real Time Clock
Lithium battery power supply, power-down clock continues to operate.
Schematic section as shown below.
21.核心板连接器定义：
