Set WiFI laptop

Claim:

Laptop with a wireless card

Procedure:

1. Click the "Start" menu, find the Start menu to find the "All apps" - "Window System" - "Command Prompt", right-click "Run as administrator", as shown below:

 

 2. Enter in the "command prompt" in the netsh wlan set hostednetwork mode = allow ssid = bin key = 12345678

(Note: "ssid =" followed by the name wifi hot, "key =" followed by a password, the password must be 8-bit or 8-bit or more.)

 

 3. Open the Control Panel, find and click Network and Sharing Center, click on the left of the "Change adapter settings", you will see the extra 2 to a Wi-Fi.

 

 4. Find local connection, right-click "Properties", then point "share" on the first check allows other network users connected to the Internet to connect this computer, wireless set "home network connection" below 2 network connection, click OK.

 

 

5. Then, enter the command prompt and enter netsh wlan start hostednetwork

 

 Note: If you enter more than instruction does not suggest bearer network has been started but could not start carrying the network prompt, enter netsh wlan show drivers to see if the network supports bearer at the command prompt in

 

 If no display, open the Control Panel - choose a large icon view mode, find the Device Manager

 

 Click to go to find a network adapter

 

 On the Intel (R) Dual Band Wireless-AC 3165 Right-click Click Update Driver Software

 

 Select the second Browse my computer for driver software

 

 Selecting from the list of selected second computer device drivers, and then select the input netsh wlan start hostednetwork bearer network may be displayed after it is determined the appropriate version.

6. Start Virtual Router software, and set the related options

 

 Then you can use WIFI access it!
Note: Do not use VirtualRouterInstaller, WPAN also be established, but even on it can not be authenticated, it can not obtain an IP address, but after the software and then connect to the wifi, normal use of network resources, so the use of this software should be It provides authentication, and then only after the certification, will get to a dynamic IP address assigned to the LAN.

Guess you like

Origin www.cnblogs.com/Hero-Bin/p/11606329.html