First, the operating method
1, clone virtual machine
to open the VMware Workstation, select a virtual machine (virtual machine is turned off before they can), select the virtual machine - Management - clone, open Clone Virtual Machine wizard: 
Click Next 
Click Next, select Create full clone: 
click Next, to clone the virtual machine a name: 
click Browse, select the storage location for the virtual machine clone, it is recommended to find a large free space disk partition: 
click OK, then click Done: 
clone click Close when done. This cloned a cloned machine with exactly the same virtual machine: 
Click to open this virtual machine, start it.
Second, modify the IP address and MACADPR code
1 prepared: (1) ping 192.168.1.202 physical machine, not ping determined to be modified after the ip address.
(2) obtaining Mac code.
Due to the uniqueness of mac address, mac address appear the same virtual machine can cause network failure. Therefore you need to change the mac address of a machine.
On the left side vmware selected clones, right-click, select Settings, in the pop-up window, select the network adapter: 
Click Advanced: 
2, modify ip address and Mac address
(1) the original clone organs machine, use xshell connected clones.
(2) Create / etc / sysconfig / network-scripts / directory
#mkdir -vp / etc / sysconfig / Network-scripts
(. 3) and add the new profile following
#vi / etc / sysconfig / network- scripts / ifcfg-ens33
TYPE=EthernetPROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=74f36016-66c9-4a8e-bde3-ec83b0d0dcf6
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.1.202(ip地址）
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
DNS1=114.114.114.114
MACADPR=00:0C:29:30:F1:88（Mac码）
（4）重启网络服务
#service network restart