Here Cisco router is C7609. According to the official website of the document, C7609 configure BFD probably as follows:
1, and bfd configuration parameters in the interface:
interface GX / X
bfd interval The multiplier The. 5 400 400 min_rx
2, configure a static route BFD:
IP route static BFD GX / X next hop (the next hop address of the static route)
3, the static routing configuration associated with an interface, the interface is associated with the configuration parameters of the peer bfd interconnection interface:
IP 255.255.255.0 route 192.168.x.0 GX / X next hop
More Cisco router configuration is complete.
Or when H3C Huawei router configuration, in accordance with the normal configuration on manual discovery bfd can not negotiate them. We need to configure bfd process parameters have been tested when the associated interconnection interfaces can.
For example:
BFD the bind. 1 Use the peer-peer IP IP interface gx / x source-ip address of the local interface Auto
Detect. 5-multiplier The
min-interval The TX-400
min-interval The RX-400
the commit
Once configured, check the status of the two sides it is normal bfd the UP.