Static Routing A routing way, routing entries manually configured, rather than dynamic decision. Unlike dynamic routing, static routing is fixed and will not change, even if network conditions have changed or re-configuration. Generally, static routes are itemized by the network administrator added to the routing table.
1. First, let's add two routers .
2. The two routers connected and turned on.
3. Configure the IP address of the pc2 and pc1 and default gateway.
4. The router R1 into the static route and an interface ip, ip attention must be finished configuring activate.
5. Enter do show ip route routing table.
6. do communicate with a router configuration, note the IP address and number.
7. Review the R2 routing table.
8. Use vpc for the ping command, ping can pass.
Because it will first try to directly connected interface, so the first two fail.