Experiment 1: Configuring static routing to achieve interoperability of the two machines
1. Open GNS3, create two routers R1, R2
2. Create two pc machine pc1, pc2
3, and routers connected to the pc, and all open
4, the router R1 enters open mode Global
An interface into the interface mode router R1 and turned 0/0 0/1
5 configured static route R1 in global mode
6. Open the router configuration R1 and R2 as we configure two interfaces R2, let's not configure a static route R2, let's see if you can ping the
7, and are arranged ip address of the gateway pc1 pc2
8, this time we went ping pc2 pc1 our findings show that the timeout, this time because we do not have to configure the router R2 R2 static routes in the routing table does not lead to a network segment 10.1, so the network can not find the router directly discarded
9, this is our go back and look at the configuration of static routing router R2
10, let us PING this is what we can find to ping the
Experiment two: R2 configure a default route to see two pc can not function interconnection
1, we first router R2 stop, then turn it in accordance with the previous steps to configure the look R2 interface, and then configure a default route
2, this is what we have to ping, ping can also find us on the front of the packet loss is caused because the ARP broadcast
