Experiment objectives: 1, to use its own vpc connection switch interconnection
2, in conjunction with Vmware switch interconnection connected GNS3
experiment one:
Use own connection switch interconnection vpc
1. Open GNS3 create a switch, the two vpc vpc connected to the switch and turn on
2, we set configure the device through the windows CRT
3, double-click switches the switch settings, the routing function is turned off, and then set pc1, pc2 ip address, respectively, and then test whether the interconnection
Experiment two:
Vmware in connection with the use of a switch interconnection GNS3
1, the virtual machine system using two win10 machines, and add a virtual network device vmnet2.
2, the two virtual machines are connected to select the custom settings vmnet1 / vmnet2. Two machines are provided ip address of the firewall to close to prevent connection failure.
3, we add the same switch and are connected to two host, or routing switches need to be closed, the above two routing interface is not used, then we turn the whole device
4, this is our input icmp be open wireshark capture view, our virtual machine 2 in 1 ping on a virtual machine, we found a packet of information, this time experiment was a success.
