And set up a LAN DHCP Mikrotik RouterOS
After buy a router, the first thing we need to do is to configure the network within the network, and how to configure it?
OK, we begin configuring routing, the router first cable is inserted into the first two Ethernet ports. Then the other end of the cable is inserted into the computer,
then download the Winbox: https://download.mikrotik.com/routeros/winbox/3.19/winbox.exe
1. Connect
Open winbox, click Neighbour can see this window:
This time we tap the MAC address, and then enter the user name admin, password blank, and then click Connect can connect into ROS.
2. Configure LAN
The factory default configuration will give me a route to the ROS 192.168.88.0/24 network segment, but if we do not want this segment, it can be processed in the following manner, then we reconfigure a network segment:
A. First click OK
B. modify the interface IP Bridge is 192.168.11.1/24 (can set their own)
At this point you can see the segment has become 192.168.11.0
3. Configure DHCP
A. Click IP> DHCP Server, delete the two:
B. Then we go back to DHCP there, click DHCP Setup
Select Interface
Confirm segment
Confirm Gateway
Verify that the DHCP address pool
In the DNS here to fill it. Click the triangle arrow multi-line
Verify that the DHCP lease time
At this point we lan port and DHCP configuration is complete.
这时候你的电脑设置自动获取IP的话，就会得到一个192.168.11.254的IP。（ROS上面的IP从地址池后面开始发的）All right. These are the Router OS configuration of the gateway and DHCP. Thank you everyone!