ESXI6.7 system installation and commissioning

1. ESXI6.7 installation and use
   1.1. ESXI6.7 installation
   insert ESXI 6.7 CD boot disc to start
   

Enter to select the first item

Enter to continue the installation

Confirm the installation F11

Select your hard drive, enter

Select the language, the default English Enter.

Set a password, the password must be uppercase letters, lowercase letters, numbers and symbols, or can not pass.

Press F11 to continue the installation.

Press Enter to complete the installation. The system will automatically restart.

1.2. ESXI system debugging

This is the main interface

Press F2 to enter edit mode (need to enter the system password)

Editing interface into the system.

Select the third configure the IP address gateway

Select IPV4 option and press enter.

Select Custom IP address, press Enter after configuring the IP address.

After checking the point has not been saved, you press the ESC key. The following diagram will appear

This figure appears, press Y to confirm the save, be considered successfully saved.

Select options shown above, press enter into.

Select the option on the map, press Enter to open the SSH, to facilitate future maintenance use.

1.3. ESXI 6.7 using
open Web page, enter the login IP address

to enter a user name and password

This ESXI into the main interface, in which you can set the network to create a virtual machine and storage.