A VLAN trunk link configuration -Cisco Packet Tracer v7.0 Cisco network simulator exercises

Disclaimer: This article is a blogger original article, shall not be reproduced without the bloggers allowed. https://blog.csdn.net/weixin_39329758/article/details/90664336

VLAN in the trunk link configuration experiments

Requirements: Completion of VLAN10 create and VLAN20; and verify interoperability with VLAN. As shown in FIG topology, the switch A and switch B, and are arranged VLAN10 VLAN20, but such communication is in a normal PC may be different switches in the same VLAN.

Switch A Settings:

1. Modify the switch host name, and create VLAN10 VLAN20;

Configuring access interface, interface F0 / 1-2 was added to VLAN10, the interface F0 / 3-4 was added to VLAN20;

3. Configure trunk link

Switch B Setting:

1. Modify the switch host name, and create VLAN10 VLAN20;

Configuring access interface, interface F0 / 1-2 was added to VLAN10, the interface F0 / 3-4 was added to VLAN20;

3. Configure trunk link;

Since F0 / 24 interface to switch automatically the interface auto-negotiation mode B configured as a trunk

 

4. PC1 verification results

PC1 ping PC2-4 can communicate; PC1 ping PC5-8 are incommunicable;

 

The results verified using PC5

PC5 ping PC1-4 can communicate; PC5 ping PC6-8 are incommunicable;